Choose Controller at WDPART

157 products

What is genset controller?
Genset Controller is used to control the functioning of the genset system. A genset controller provides various monitoring functions of a genset, monitoring of various electrical parameter like voltage, current, frequency, power etc. It also has capability to measure the temperature, oil level/ pressure etc.

How do I know my generator set controller needs replacing?
1. The generator runs slower than usual.
2. The generator makes abnormal noise.
3. The generator output power is low and lower than the normal power.

Why choose Controller at WDPART?
We offer various brands of controllers with high quality. The brands we offered are DeepSea,Smartgen and others. Alternative OEM and original parts available.

Which Controllers does WDPART supply?
WDPART can provide original or aftermarket controllers of deep sea, smartgen, and Cummins brands. Hot sale Controller models: DSE6110, DSE7210, DSE702MS, DSE704, DSE4420, DSE701, DSE7220, DSE7410 MKII, AMF25, AMF20, DSE7420 and so on.

 

  •
    $536.00
    $536.00
    $0.00
    Smartgen CMM366A-3G Cloud Communication Module

    CMM366A-3G Cloud Monitoring Communication Module is GPRS wireless network communication protocol switch module that can achieve Genset (with SCI) connect to the Internet.
    After logging into the cloud server, the module will receive a corresponding Genset controller communication protocol from a cloud server.
    And the module gains Genset data via RS485 port, USB port, LINK port or RS232 port. Then the module transmits the data to a corresponding cloud server via GPRS wireless network for achieving user’s real-time monitoring to running status and searching for running records via APP (IOS or Android) and PC terminal devices.
    CMM366A-3G module not only can achieve Genset monitoring but also can insert some digital alarm input/output signal to achieve the monitoring of the generator room entrance guard, guard against theft and fire facilities.
    CMM366A-3G module, which has a GPS locate function, can upload gained longitude, latitude, and elevation to a corresponding cloud server.
    Free Shipping!
    Application:
    Smartgen

    Interchange part number:
    CMM366A-3G

    Description:
    Cloud Monitoring Communication Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $160.00
    $160.00
    $0.00
    SmartGen CMM366-4G Monitoring Communication Module
    PERFORMANCE AND CHARACTERISTICS
    1. Connect to cloud server via 4G wireless network, one to one monitoring;
    2. Multiple ports for communication with Genset control module: RS485, RS232, LINK and USB (Host); can monitor great majority Genset control modules of international first-class brands;
    3. Widely power supply: DC (8~35)V, can direct use Genset build-in battery;
    4. With ARM-based 32-bit SCM, high integration of hardware and strong programming ability;
    5. Include with GPS locate function to achieve gain location information and locate Genset;
    6. Take JSON network data communication protocol, upload real-time data variation and take compression algorithm to vastly reduce network flow at the same time;
    7. When an alarm occurs it can upload data to the server immediately;
    8. 2 auxiliary digital input ports which can receive external alarm signal;
    9. 1 auxiliary relay output ports which can output various of alarm signal;
    10. Power and multiple communication status indicators on the front panel that working status is clear at a glance;
    11. Lamp test function;
    12. Parameter adjust function: users can adjust parameters via USB port;
    13. Take standard π-type 35mm guide-rail installation or screw-fixed installation that the module can be installed in the Genset control box;
    14. Modular design, self-extinguishing ABS plastic shell, lightweight, compact structure with easy installation.

    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    CMM366-4G

    Description:
    Cloud Monitoring Communication Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $1,358.00
    $1,358.00
    $0.00
    SmartGen HGM9560 Generator Controller
    Free Shipping
    Application:
    SmartGen 

    Interchange part number: 
    HGM9560 

    Description: 
    Controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $1,085.00
    $1,085.00
    $0.00
    Smartgen Generator Controller HGM9580 Bus Tie Bus Parallel
    Smartgen Generator Controller HGM9580
    HGM9580 Bus Tie Bus Parallel Unit is designed for a manual/auto parallel system which composed of a multi-way bus and multi-way bus. It allows for automatic parallel running functions. It fit with LCD display, graphic display, optional Chinese, English and other languages interface, and it is reliable and easy to use.
    HGM9580 Bus Tie Bus Parallel Unit controls a bus breaker that can control the controller to synchronize the two ways buses via MSC CAN if the synchronization requirements have satisfied. The powerful 32-bit Microprocessor contained within the unit allows for precision parameters measuring, fixed value adjustment, time setting, and set value adjusting and etc..Majority parameters can be configured from the front panel, and all parameters can be configured by USB interface (or RS485) to adjust via PC. It can be widely used in all types of automatic genset parallel systems with compact structure, simple connections, and high reliability.
    Free Shipping!
    Application:
    Smartgen

    Interchange part number:
    HGM9580

    Description:
    Generator Controller 

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $1,624.00
    $1,624.00
    $0.00
    SmartGen HGM9530N Generator Controller
    Free Shipping
    Application:
    SmartGen 

    Interchange part number: 
    HGM9530N 

    Description: 
    Controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $148.00
    $148.00
    $0.00
    SmartGen HT10M Engine with (0~7) L displacement with the function 
    PERFORMANCE AND CHARACTERISTICS:
    1. Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low-temperature capability;

    2. Stainless steel inner pipes and end closure with high corrosion resistance;
    3. Coolant temperature is controlled by a thermostat which is installed within the heater. It has simple connections and high reliability;
    4. power, heating and overheat protection light indicators make it easy to observe the heater status;
    5. There is a water drain valve with a seal ring on the bottom of the heater so as to be used when needed;
    6. Users can press the “Test” button to test-run the machine in the extremely high ambient temperature;
    7. Overheating thermostat provides the protection of dry heating and overheating;
    8. Multiple installation ways apply to different installation situations;
    9. This product can work normally at -25 ºC temperature.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HT10M

    Description:
    Displacement with the Function of Test-run the machine

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $905.00
    $905.00
    $0.00
    SmartGen HWP90 Engine Heater Suitable for various engine
    Free Shipping
    HWP series forced circulation water engine heater is composed of 3 parts: control section, water pump and water heater.
     
     If during cranking the outside temperature is lower than 4ºC, engine coolant and lubricant may condense into solid state and lose their lubricating and cooling properties, which can damage the engine. Engine heater should be installed to ensure normal starting and running of the engine when the outside temperature is lower than 4 ºC.
     
     HWP series forced circulation water engine heater combines the following features: cast stainless steel inner pipes and end closure with high corrosion resistance; heating and overheat light indicators; user-defined thermostat set point; dry heating and overheat protection.
     
     This product is suitable for various engine with (15~100)L displacement.
     
     PERFORMANCE AND CHARACTERISTICS:
     1.     The circulating water pump adopts special customized pump with stainless steel pump head for good mute effect, reliable and safe and long lifetime.
     2.     Control section: microprocessor design; high sampling precision and accuracy control due to PT100 temperature sampling. Coolant temperature can be set via the control panel. Four digital LED display, coolant temperature and all kinds of set point temperature can be displayed clearly.
     3.     Dry heating and overheat protection.
    4. Separately control of water pump and water heater: power on the water pump and water heater synchronously, once the set temperature has reached, water heater will be powered off firstly, after 3s, following is water pump. The goal is to prevent heat concentration and significantly prolong water pump lifetime.
    5. Manual test: test the water heater and water pump are normally or not via panel button.
    6. Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low temperature capability;
    7. Stainless steel inner pipes and end closure with high corrosion resistance;
    8. There is a water drain valve with seal ring on the bottom of the heater so as to be used when needed;
    9. There is one-way inlet valve on the water inlet.
    10. This product can work normally at -25℃ temperature.
  •
    $270.00
    $270.00
    $0.00

    HAT552 Dual Power ATS Controller for SmartGen AC177-277V
    Free Shipping!
    Application:
    SmartGen HAT552 AC177-277V with Interface RS485

    Interchange part number: 
    HAT552 

    Description: 
    Controller 

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $276.00
    $276.00
    $0.00

    HAT553 Dual Power ATS Controller for SmartGen AC177-277V
    Free Shipping!
    Application:
    SmartGen HAT553 AC177-277V with Interface RS485

    Interchange part number: 
    HAT553 

    Description: 
    Controller 

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $349.00
    $349.00
    $0.00
    SmartGen HGM7210 Genset Controller DC Genset Controller
    Free Shipping
    Application:
    SmartGen 

    Interchange part number: 
    HGM7210 

    Description: 
    Controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Technical Specifications:
    1. Function Item Parameter
    2. Display: LCD(132*64)
    3. Operation Panel: Silicon Rubber
    4. Language: Chinese & English & Others
    5. Digital Input: 7
    6. Relay Output: 8
    7. Analogue Input: 5
    8. AC System: 1P2W/2P3W/3P3W/3P4W
    9. Alternator Voltage: (15~360)V(ph-N)
    10. Alternator Frequency: 50/60Hz
    11. Monitor Interface: RS485
    12. Programmable Interface: USB/RS485
    13. DC Supply: DC(8-35)V
    14. Case Dimensions(mm): 197*152*47
    15. Panel Cutout(mm): 186*141
    16. Operating Temp.: (-25~+70)℃
  •
    $149.00
    $149.00
    $0.00
    SmartGen HT22M Engine with (7~13) L displacement
    PERFORMANCE AND CHARACTERISTICS
    Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low-temperature capability;
    Stainless steel inner pipes and end closure with high corrosion resistance;
    Coolant temperature is controlled by a thermostat which is installed within the heater. It has simple connections and high reliability;
    power, heating and overheat protection light indicators make it easy to observe the heater status;
    There is a water drain valve with a seal ring on the bottom of the heater so as to be used when needed;
    Users can press the “Test” button to test-run the machine in the extremely high ambient temperature;
    Overheating thermostat provides the protection of dry heating and overheating;
    Multiple installation ways apply to different installation situations;
    This product can work normally at -25 ºC temperature.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HT22M

    Description:
    Engine with (7~13) L Displacement

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $152.00
    $152.00
    $0.00
    SmartGen HGM1790N Generator Pump Controller Module
    Free Shipping!
    Application:
    SmartGen 

    Interchange part number: 
    HGM1790N 

    Description: 
    Controller 

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $84.00
    $84.00
    $0.00
    Smartgen MGC100 Manual Remote Start Generator Controller
    Free Shipping!
    Application:
    Smartgen 

    Interchange part number: 
    MGC100 

    Description: 
    generator controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $683.00
    $683.00
    $0.00
    Application：
    genset

    Interchange part number:
    DSE7420 MKII

    Description:
    MKII genset controller auto start control module 
    OVERALL SIZE
    245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”)
    PANEL CUTOUT SIZE
    220 mm x 160 mm (8.7" x 6.3")
    Product Variants
    7420-03 - 7420 MKII Auto Mains (Utility) Failure Control Module
    7420-04 - 7420 MKII Auto Mains (Utility) Failure Control Module (Htr)

    Condition: New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $269.00
    $269.00
    $0.00
    DSE6020 MKII AMF Module Controller Fits for Generator
    Free Shipping

    Application:
    Generator

    Interchange part number: 
    DSE6020 

    Description: 
    Module Controller 

    Condition:New,Replacement

    Product Details:
    DSE 6020 AMF module,The control system is an integral part of the unit and also the heart of the unit. The application of the intelligent control system in the unit is helpful to improving the quality of the electric energy and the automation level of the diesel unit.

    1: Standard screen: Namely manual control screen. You only need to connect the start battery to control the unit locally.
    2: Self-start control screen: The unit can realize both local manual control and remote control (by the external signal line). You need to connect the signal control line to this screen correctly
    3: “Three-remote” communication fully automatic control screen: On the basis of the “self-start control screen” function, it also has the communication mode
    4: It is used in the automation and monitoring system of single unit. It has many functions like automatic startup/shutdown, data measurement, alarm protection and “three-remote". The controller has large LCD display and Chinese/English interface, realizing simple operation and reliable running.
    Continuous Voltage Rating
    8 V to 35 V Continuous

    Maximum Operating Current
    100 mA at 12 V, 105 mA at 24 V

    Maximum standby current
    60 mA at 12 V, 55 mA at 24 V

    Frequency range
    3.5 Hz to 75 Hz

    Configurable as:
    Negative switching digital input
    0 Ω to 480 Ω
    Analogue input D
    Configurable as:
    Negative switching digital input
    0 V to 10 V
    4 mA to 20 mA
    0 Ω to 480 Ω
    Auxiliary Outputs C, D, E & F
    2 A DC at supply voltage
  •
    $1,539.00
    $1,539.00
    $0.00
    Generator Controller DSE8610 for Deep Sea
    Interchange part number:DSE8610 

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Deep-Sea Electronics DSE8610 Synchronising & Load Sharing Control Module
    The DSE8610 is an intelligent mono display auto-start load share control module packed with industry-leading features to enhance multi-set control. The module can be synchronized with up to 32 generators within the same system.
    OVERALL SIZE:240 mm x 181 mm x 42 mm 

    Key Features and Benefits:
     32-set synchronization.

     It offers optimum flexibility for system expansion.

    Configurable inputs/outputs (11/8).

    It provides multiple installation options.

    Dead bus sensing.

    It provides rapid power delivery on multi-set systems.

    Remote communications (RS232, RS485, Ethernet).

    Provides secure and simple off-site monitoring. All ports are continuously active.

    Direct governor & AVR control.

    Eliminates the requirement for external control equipment.

    kW & kV Ar load sharing.

    Provides controlled power delivery.

    Configurable event log (250).

    Provides access to historical alarms and operational status.

    Integral PLC editor.

    Ensures additional applications are easily integrated into the system.

    Load switching, load shedding & dummy load outputs.

    Allows load options and dummy load requirements to be independently controlled.

    Power monitoring (kW h, kVAr, kV Ah, kV Ar h), reverse power protection, kW overload protection.

    It provides clear accurate power measurement information.

    Data logging (HDD/USB).

    Provides current and historical status information.

    DSE Configuration Suite PC Software.

    Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

    Tier 4 CAN engine support.

    Ensures the control module can be used with the latest in modern electronic engineering technology.
  •
    $140.00
    $140.00
    $0.00
    DSE5120 Module Control Panel for Deep Sea
    Free Shipping
    Interchange part number:DSE5120

    Description:
    Main features
    1.    micro-computer control
    2.automatically activated, the shutdown
    3.real-time display
    4.visualization of the police state of graphics
    5.quick information display unit
    6.LED and LCD alarm instructions
    7.Programmable relay output
    Control Features
    1.    Emergency Parking Control
    2.Automatic Car Plate
    3.StartDelay Control
    4.LocalManually Start / Shutdown
    5.RemoteAutomatic Start / Shutdown
    6.Pre-warm,Pre-controlled oil
    7.Coldmachine, Parking For Electricity
    8.ATSswitch control

    Display Data
    1.    Speed of Generator
    2.Battery Voltage
    3.Oil Pressure of Engine
    4.Water Temperature of Engine
    5.Generating Unit Output Frequency Of Exchange
    6.Operating Time of Generator Set
    7.Load-phase AC current
    8.Exchange phase Voltage

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $80.00
    $80.00
    $0.00
    Electronics Controller Module AMF Unit DSE704 for Deep Sea
    Free Shipping

    Interchange part number:DSE704

    Description:
    Automatic mains (utility) supply monitoring
    Automatic shutdown when fault conditions are detected
    Manual start
    Engine pre-heat
    Engine monitoring and protection features
    Protected Solid State (PSS) outputs
    Front panel mounting
    Front panel programming
    Tamper proof engine hours counter
    Remote start
    LED indicators
    Configurable timers
    Configurable outputs
    Single/three phase mains sensing

    Condition: New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $135.00
    $135.00
    $0.00

    WDPART Deep Sea Controller DSE710 Module
    Free Shipping
    Interchange part number:DSE710

    Condition: New, Replacement

    Description:
    Specific Data：
    1.     Automatic Mains Supply Monitoring              2. Emergency Stop Control
    3. Automatic Control Of Overcrank                    4. Local Manual Start/Stop
    5. Remote Automatic Start/Stop                        6. Start Motor Automatic Exit Control
    7. Preheat Control Of Multiple Modes               8. Parking Power Supply Control
    9. Dual Power Switch Switching Control           10. Start Delay Control

    Product Protection Function:
    1.    Lubricating Oil Pressure Low Protection
    2.Charging Machine Charging Failure
    3.Generator Set Emergency Stop
    4.Generator Set Public Alarm
    5.Generator Overvoltage, Undervoltage, Overload Protection, Cooling Water Temperature High Protection
    6.Engine Overclocking /Low-Frequency Protection
    7.Engine Stop / Start Failure


    Specification:
    1.    ModelDSE710
    2.DC SupplyContinuous Voltage Rating
    3.8 V to 35 V continuous
    4.Maximum Operating Current
    5.180 mA at 12 V; 190 mA at 24 V
    6.Maximum Standby Current
    7.145 mA at 12 V; 150 mA at 24 V
    8.OutputAuxiliary
    9.Solid state
    10.2.4A DC at supply voltage
    11.Fuel/Start
    12.Solid state
    13.3.4 A DC at supply voltage
    14.Generator C.T.
    15.5 A secondary 0.5 VAGenerator Inpu t Range
    16.35 V(L-N) to 333 V AC(L-N) absolute maximum
    17.50 Hz - 60 Hz (min 15 V AC)
  •
    $45.90
    $45.90
    $0.00
    Manual Start Generator Controller DSE701MS for Deep Sea
    Free Shipping
    Application：

    Deep Sea

    Interchange part number:    DSE701MS

    Description:
    Specification:
    1.Condition: 100% Brand New
    2.Item Type: Generator Controller
    3.Material: Plastic
    4.Model: DSE702MS
    5.Mounting Hole Size: Approx. 68 * 68mm / 2.7 * 2.7in

    Package List:
    1 * Generator Controller
    2 * Fixing screw
    2 * Key

    Note:
    1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

    Condition:     New,Replacement

Go to full site