wdpart

SmartGen HT10M Engine with (0~7) L displacement with the function 
PERFORMANCE AND CHARACTERISTICS:
1. Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low-temperature capability;

2. Stainless steel inner pipes and end closure with high corrosion resistance;
3. Coolant temperature is controlled by a thermostat which is installed within the heater. It has simple connections and high reliability;
4. power, heating and overheat protection light indicators make it easy to observe the heater status;
5. There is a water drain valve with a seal ring on the bottom of the heater so as to be used when needed;
6. Users can press the “Test” button to test-run the machine in the extremely high ambient temperature;
7. Overheating thermostat provides the protection of dry heating and overheating;
8. Multiple installation ways apply to different installation situations;
9. This product can work normally at -25 ºC temperature.
Free Shipping!
Application:
SmartGen

Interchange part number:
HT10M

Description:
Displacement with the Function of Test-run the machine

Condition:New,Original

PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

SmartGen HWP90 Engine Heater Suitable for various engine

HWP series forced circulation water engine heater is composed of 3 parts: control section, water pump and water heater.
 
 If during cranking the outside temperature is lower than 4ºC, engine coolant and lubricant may condense into solid state and lose their lubricating and cooling properties, which can damage the engine. Engine heater should be installed to ensure normal starting and running of the engine when the outside temperature is lower than 4 ºC.
 
 HWP series forced circulation water engine heater combines the following features: cast stainless steel inner pipes and end closure with high corrosion resistance; heating and overheat light indicators; user-defined thermostat set point; dry heating and overheat protection.
 
 This product is suitable for various engine with (15~100)L displacement.
 
 PERFORMANCE AND CHARACTERISTICS:
 1. The circulating water pump adopts special customized pump with stainless steel pump head for good mute effect, reliable and safe and long lifetime.
 2. Control section: microprocessor design; high sampling precision and accuracy control due to PT100 temperature sampling. Coolant temperature can be set via the control panel. Four digital LED display, coolant temperature and all kinds of set point temperature can be displayed clearly.
 3. Dry heating and overheat protection.
4. Separately control of water pump and water heater: power on the water pump and water heater synchronously, once the set temperature has reached, water heater will be powered off firstly, after 3s, following is water pump. The goal is to prevent heat concentration and significantly prolong water pump lifetime.
5. Manual test: test the water heater and water pump are normally or not via panel button.
6. Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low temperature capability;
7. Stainless steel inner pipes and end closure with high corrosion resistance;
8. There is a water drain valve with seal ring on the bottom of the heater so as to be used when needed;
9. There is one-way inlet valve on the water inlet.
10. This product can work normally at -25℃ temperature.

Application:
SmartGen BAC150CAN 12V 5A with Three segments

Interchange part number: 
BAC150CAN 

Description: 
Battery Charger

Condition:
New, Original

Battery Charger for SmartGen BAC150CAN 24V 5A with Three segments

Application:
SmartGen

Interchange part number: 
BAC150CAN

Description: 
Battery Charger 

Condition:
New,Original

SmartGen HGM7210 Genset Controller DC Genset Controller

Application:
SmartGen 

Interchange part number: 
HGM7210 

Description: 
Controller

Condition:New,Original

PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

Technical Specifications:

BAC2408 24V 8A Battery Charger for SmartGen

SmartGen BAC4812-KP 48V Battery Charger
Free Shipping!
Application:
SmartGen

Interchange part number: 
BAC4812-KP

Description: 
battery charger

Condition:New, replacement

SmartGen HT22M Engine with (7~13) L displacement
PERFORMANCE AND CHARACTERISTICS

Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low-temperature capability;

Stainless steel inner pipes and end closure with high corrosion resistance;

Coolant temperature is controlled by a thermostat which is installed within the heater. It has simple connections and high reliability;

power, heating and overheat protection light indicators make it easy to observe the heater status;

There is a water drain valve with a seal ring on the bottom of the heater so as to be used when needed;

Users can press the “Test” button to test-run the machine in the extremely high ambient temperature;

Overheating thermostat provides the protection of dry heating and overheating;

Multiple installation ways apply to different installation situations;

This product can work normally at -25 ºC temperature.

Free Shipping!
Application:
SmartGen

Interchange part number:
HT22M

Description:
Engine with (7~13) L Displacement

Condition:New,Original

PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.