Choose Controller at WDPART

149 products

What is genset controller?
Genset Controller is used to control the functioning of the genset system. A genset controller provides various monitoring functions of a genset, monitoring of various electrical parameter like voltage, current, frequency, power etc. It also has capability to measure the temperature, oil level/ pressure etc.

How do I know my generator set controller needs replacing?
1. The generator runs slower than usual.
2. The generator makes abnormal noise.
3. The generator output power is low and lower than the normal power.

Why choose Controller at WDPART?
We offer various brands of controllers with high quality. The brands we offered are DeepSea,Smartgen and others. Alternative OEM and original parts available.

Which Controllers does WDPART supply?
WDPART can provide original or aftermarket controllers of deep sea, smartgen, and Cummins brands. Hot sale Controller models: DSE6110, DSE7210, DSE702MS, DSE704, DSE4420, DSE701, DSE7220, DSE7410 MKII, AMF25, AMF20, DSE7420 and so on.

 

  •
    $1,135.00
    $1,135.00
    $0.00
    SmartGen HGM9510 Generator Controller for Manual/Auto
    Free Shipping
    Application:
    Manual/Auto Parallel System Generators 

    Interchange part number: 
    HGM9510 

    Description: 
    Controller 

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $1,234.00
    $1,234.00
    $0.00
    SmartGen HGM9520 Generator Controller
    Free Shipping
    Application:
    SmartGen 

    Interchange part number: 
    HGM9520 

    Description: 
    Controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $188.00
    $188.00
    $0.00
    HAT160 Automatic transfer switch controller (ATS) 230/400VAC
    SmartGen HAT160 Automatic Transfer Switch Controller 
    HAT160 ATS Controller is suitable for CB ATS of a single motor. It can accurately detect 2-way-3-phase 4-wire/single-phase 2-wire voltage and judge voltage abnormal (such as over-voltage, under-voltage, over frequency, under frequency and lack of phase), then control ATS after a delay. When ATS switches abnormally, the controller can detect close/open failure and alarm on the front panel to ensure the correct action of ATS. After abnormal of I# power, the controller will send a signal to start the Genset. The controller has remote communication, remote control, and parameter configuration functions via LINK port communication.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HAT160

    Description:
    Automatic Transfer Switch Controller

    Condition:New,Original
  • $265.00
    $265.00
    $0.00
    SMARTGEN HAT310 120VAC ATS Controller 120/240VAC 50-60Hz
    HAT310-120V ATS Controller is suitable for 2-stage of PC, and ATS of CC class (close signal is constant output).
    It can accurately detect 3-phase 4-wire mains voltage and generator single-phase voltage.
    When the mains under-voltage and loss of phase occurred, HAT310-120V will control ATS transfer after a delay. If the mains are unavailable, the controller has the function to initiate signals to start the gen-set.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HAT310 120VAC

    Description:
    Controller

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $149.00
    $149.00
    $0.00
    SmartGen HAT520N ATS controller
    The powerful Microprocessor contained within the HAT520N ATS controller allows for precision voltage (2-way 3-phase/single phase) measuring and make accurate judgment on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, phase sequence wrong) and control ATS to transfer after the delay has expired. This controller is suitable for NO Breaking ATS. When 1# power is abnormal, the controller will send a signal to start Genset after the “1# abnormal delay” has expired. “Three remote” (remote control, remote measurement, and remote communication) function can be implemented with the help of the LINK communication port.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HAT520N

    Description:
    ATS Controller

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $84.00
    $84.00
    $0.00
    SmartGen HAT530N ATS Controller for NO Breaking ATS 
    The powerful Microprocessor contained within the HAT530N ATS controller allows for precision voltage (2-way 3-phase/single phase) measuring and make accurate judgment on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, phase sequence wrong) and control ATS to transfer after the delay has expired. This controller is suitable for NO Breaking ATS and ONE Breaking ATS.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HAT530N

    Description:
    ATS Controller

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $188.00
    $188.00
    $0.00
    SmartGen HAT560NBC ATS controller PC Two-stage PC
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HAT560NBC

    Description:
    ATS Controller

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    1. System type can set as: Mains (1#) & Generator (2#), Generator (1#) & Mains (2#), Mains (1#) & Mains (2#), Generator (1#) & Generator (2#).
    2. 132x64 LCD with backlight, optional Chinese and English display, push-button operation.
    3. Measure and display 2-way 3 phase Voltage and Frequency:
    4. Over/under voltage, loss of phase, reverse phase sequence, over/under frequency protection.
    5. Automatic/Manual mode. In manual mode, can force the switch to close or open;
    6. All parameters can be set on site. Two different passwords which ensure authorized staff operation only.
    7. During commissioning, the genset can be set either on On-load or Off-load mode.
    8. ATS Controller has the function of automatic Re-closing.
    9. The closing output signal can be set as on intervals or as continuous output.
    10. Applicable for ATS of one neutral position, two neutral positions and non-position.
    11. Applicable for 2 isolated neutral lines.
    12. Real-time clock (RTC).
    13. The event log can record 50 items circularly.
    14. Scheduled start & stop generator (can be set as start genset once a day/week/month whether with load or not).
    15. Can control two generators to work in a cycle, even the genset running time and crank rest time can be set.
    16. Optional AC system or DC system.
    17. With standard LINK communication interface. With "remote controlling, remote measuring, remote communication" function by the Modbus communication protocol. Can remote start/stop the genset and remote control the ATS to close or open?
    18. With RS485 isolated communication interface. With "remote controlling, remote measuring, remote communication" function by the ModBus communication protocol; or remote measuring the status of incoming cabinet and remote controlling the ATS to close/open by the front-end intelligent device (YD/T 1363.3－2005) protocol.
    19. Can check the current status of the controller (digital input port, a digital output port, over-voltage, under-voltage, over frequency, under frequency, etc.).
    20. Suitable for various AC systems (3 phase 4-wires, 3-phase 3-wires, single-phase 2-wire, and 2-phase 3-wire).
    22. Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting，compact structure with easy installation.
  •
    $238.00
    $238.00
    $0.00
    Engine Generator Controller Module HAT600N ATS Module
    Engine Generator Controller Module HAT600N Generator Control ATS Module
    HAT600N series ATS controller is intelligent dual-supply module with programmable function, automatic measurement, LCD display, and digital communication. It combines digital intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT600N

    Description:
    Engine Generator Controller Module

    Condition:New,Original
  •
    $416.00
    $416.00
    $0.00
    Engine Controller Module HAT600NI for SmartGen ATS Module
    Engine Generator Controller Module HAT600NI Generator Control ATS Module
    HAT600N series ATS controller is an intelligent dual-supply module with programmable function, automatic measurement, LCD display, and digital communication. It combines digital intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen ATS Module

    Interchange part number:
    HAT600NI

    Description:
    Engine Controller Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $289.00
    $289.00
    $0.00
    Engine Controller Module HAT600NB for SmartGen ATS Module
    Engine Generator Controller Module HAT600NB Generator Control ATS Module
    HAT600N series ATS controller is an intelligent dual-supply module with programmable function, automatic measurement, LCD display, and digital communication. It combines digital intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen ATS Module

    Interchange part number:
    HAT600NB

    Description:
    Engine Controller Module

    Condition:New,Original
  • $328.00
    $328.00
    $0.00
    Engine Controller Module  HAT600NBI for SmartGen ATS Module
    Free Shipping
    Engine Generator Controller Module HAT600NBI Generator Control ATS Module
    HAT600N series ATS controller is intelligent dual-supply module with programmable function, automatic measurement, LCD display, and digital communication. It combines digital intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping
    Application:
    for SmartGen ATS Module

    Interchange part number: 
    HAT600NBI


    Description: 
    Engine Controller Module

    Condition:New

  •
    $319.00
    $319.00
    $0.00
    Engine Generator Controller Module HAT700 ATS Module
    Engine Generator Controller Module HAT700 Generator Control ATS Module
    HAT700 series ATS controller is an intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT700

    Description:
    Engine Generator Controller Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $308.00
    $308.00
    $0.00
    Engine Generator Controller Module HAT700I ATS Module
    Engine Generator Controller Module HAT700I Generator Control ATS Module
    HAT700 series ATS controller is an intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT700I

    Description:
    Engine Generator Controller Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $453.00
    $453.00
    $0.00
    Engine Generator Controller Module HAT700B ATS Module
    Engine Generator Controller Module HAT700B Generator Control ATS Module
    HAT700 series ATS controller is an intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT700B

    Description:
    Engine Generator Controller Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $524.00
    $524.00
    $0.00
    Engine Generator Controller Module HAT700S Generator Control ATS Module
    Engine Generator Controller Module HAT700S Generator Control ATS Module
    HAT700 series ATS controller is an intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT700S

    Description:
    Controller Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $425.00
    $425.00
    $0.00
    SmartGen HAT780 Dual power bypass ATS controller
    Free Shipping
    Application:
    SmartGen 

    Interchange part number: 
    HAT780 

    Description: 
    Dual power bypass ATS controller

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $1,273.00
    $1,273.00
    $0.00
    Engine Generator Controller Module HAT821 ATS Module
    Engine Generator Controller Module HAT821 Generator Control ATS Module
    HAT821 Dual Power Bus Tie controller is an intelligent bus-tie dual-power switchover module with configurable function, automatic measurement, LCD display, and digital communication. It combines digitization, intelligence, and networking. Automatic measurement and control can reduce incorrect operation, which is an ideal option for dual-power bus-tie switchover products.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT821

    Description:
    Engine Generator Controller Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $1,193.00
    $1,193.00
    $0.00
    Engine Generator Controller Module HAT832
    Engine Generator Controller Module HAT832 Generator Control ATS Module
    HAT832 Three Power ATS controller (Dual-ATS) is intelligent tri-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digitization, intelligence, and networking. Automatic measurement and control can reduce incorrect operation, which is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT832

    Description:
    Engine Generator Controller Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $1,465.00
    $1,465.00
    $0.00
    Generator Controller ATS Module HAT833 WDPART
    Engine Generator Controller Module HAT833 Generator Control
    HAT833 Three Power ATS controller is an intelligent tri-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digitization, intelligence, and networking. Automatic measurement and control can reduce incorrect operation, which is an ideal option for ATS.
    Free Shipping!
    Application:
    SmartGen Generator

    Interchange part number:
    HAT833

    Description:
    Engine Generator Controller Module

    Condition:New,Original
  • $189.00
    $189.00
    $0.00
    WDPART SmartGen DIN16A Digital Input Module
    SmartGen DIN16A Digital Input Module
    DIN16A digital input module is an expansion module that has 16 auxiliary digital input channels and the name of each channel can be defined by users. The input port status collected by DIN16A is transmitted to the HMC9000S controller for processing via CANBUS port.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    DIN16A

    Description:
    Digital Input Module

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
Go to full site