Collection: Choose AVR at WDPART
We offer AVR parts with OEM quality and widen usage. We offer replacement
AVR parts used for Honda, Leroy Somer, Generator Gensets and so on.
Application:Marathon and stamford alternator,FG Wilson genset with Perkins engine,Leroy Somer Generator,Caterpillar CAT engine,Kutai,Denyo 45ESI 150SPM 150ESK Genset Generator......
What are the signs of a faulty AVR in a generator?
1 - Unstable generator engine speed.
2 - Current overload.
3 - Power surge.
4 - Short circuit.
5 - Age.
What causes an AVR to fail?
It was concluded that the cause of AVR damage was due to the generator driving motor which experienced a decrease in performance so that when subjected to electric load the engine rotation experienced instability which caused voltage fluctuations where this caused the AVR to work abnormally resulting in AVR damage.
-
- Precio regular
- $55.00
- Precio de venta
- $55.00
- Precio regular
-
$0.00
Free Shipping
Application:
< 0.5% Regulation
220/400 V AC Programmable Input
Rugged Compact Design
With Under Frequency Protection
Soft Start Voltage Ramping
EMI Suppression
Built-in High Capacity 15AMP Fuse
Interchange part number:
GAVR-15B GAVR15B
Description:
AVR Automatic Voltage Regulator
Condition:New, replacement -
- Precio regular
- $45.80
- Precio de venta
- $45.80
- Precio regular
-
$0.00
Free Shipping
Application:
Voltage Set-up:The voltage set up when the remnant magnetism greater than 4V25Hz
Input power Supply:AC 160~260V 50/60Hz
Maximum Output:DC 15A 90V(when the voltage reaches AC 207V)
Frequency Compensation: Built-in low speed protective circuit.
Regulation factor:Less then 1%
Interchange part number:
GAVR-15A
Description:
AVR Automatic Voltage Regulator
Condition:
New, replacement -
- Precio regular
- $60.00
- Precio de venta
- $60.00
- Precio regular
-
$0.00
Free Shipping
Application:
brushless generator, is suitable for both 50HZ and 60HZ
Voltage Set-up:The voltage set up when the remnant magnetism greater than 4V 25Hz
Input power Supply:AC 160~260V 50/60Hz
Maximum Output:DC 5A 95V(when the voltage reaches AC 240V)
Frequency Compensation:Built-in low speed protective circuit.
Reglation factor:<1
Interchange part number:
GAVR-12A
Description:
AVR Automatic Voltage Regulator
Condition:New, replacement -
- Precio regular
- $59.80
- Precio de venta
- $59.80
- Precio regular
-
$0.00
Free Shipping
Specifications:
Input :
Sensing Voltage : 220/400VAC,1phase 2wire
Power Voltage : 180~240VAC, 1phase 2wire
Voltage Jumper selectable : 95-132V ac or 190-264 Hz nominal
Frequency : 50-60 Hz nominal
Output :
Voltage max : 90V dc at 207V ac input
Current continuous : 2A dc
Current intermittent : 5A for 10 secs
Resistance : 20 ohms minimum
Voltage Build-up : esidualvolts at AVR terminal>5VAC
External volts adjustment : +/-7%with 1KΩ 1watt trimmer
Unit Power Dissipation : Max.8Watt
Under Frequency Protection : 60Hz system presets knee point at 57Hz
Factory Settings : 50Hz system presets knee point at 47Hz
Body size : 10.7*8.2*125px
Interchange part number:
GAVR-10A
Description:
AVR Automatic Voltage RegulatorFollowing are the main features of General Generator AVR GAVR-10A:
1. Automatic Voltage Regulator,Brushless AVR
2. MAX.Output Current:10A for 10 Second
3. Loading Impedance: 15~100OHM
4. Temperature Stability: <0.02%/PER Celsius Changed
5. Under Frequency protection point: 45HZ for 50Hz apply (55Hz for 60Hz supply)
Condition:
New, replacement -
- Precio regular
- $52.80
- Precio de venta
- $52.80
- Precio regular
-
$0.00
Free Shipping
Application:
Input voltage:Jumper selectable 190-264V ac
Frequency:50-60 Hz nominal
Output voltage:max 90V dc at 207V ac
Input current:continuous 2A dc,Intermittent 5A for 10 secs
Regulation:+/- 1%
Interchange part number:
GAVR-8A
Description:
AVR Generator Automatic Voltage Regulator Module
Condition:New, replacement -
- Precio regular
- $273.00
- Precio de venta
- $273.00
- Precio regular
-
$0.00
Automatic Voltage Regulator AVR R120 AEM230RE005
Free ShippingApplication:
TAL040 B, TAL040 C, TAL040 C1, TAL040 D, TAL040 E, TAL040 F TAL042 A, TAL042 B, TAL042 C, TAL042 D, TAL042 E, TAL042 F, TAL042 G, TAL042 H TAL044 A, TAL044 B, TAL044 C, TAL044 D, TAL044 D1, TAL044 E, TAL044 H, TAL044 J, TAL044 K
Interchange part number:
R120 AEM230RE005
Description:
Automatic Voltage Regulator AVRSpecification:
Sensing input:
- Voltage: 277 VAC ± 10% for 1-phase,
415 VAC line-to-line ± 10% for 3-phase,
2-line sensing. The AVR senses the true
average of the line-to-line waveform. Use
the resistor (SMD) network for trouble-free
Sensing and control of sensed voltage/regulation.
Input power:
- Voltage: 277 VAC rms ± 10%
- Frequency: 50/60 Hz
Output power:
-Voltage: 95 VDC for 240 VAC Input
-Current:
4 A DC
6 A for 30 sec. (when allowed by the field resistance)
Operating temperature: -20ºC to +70ºC
Storage temperature: -40ºC to +80ºC
Voltage setting: min ± 10% of rated voltage.
Stability setting: can be adjusted to obtain
a correct transient response in a steady state.
Under frequency roll-off setting: available
Below 46 Hz for 50 Hz and below 56 Hz for 60 Hz.
Voltage build-up: 2 Volts (L-N)
Voltage regulation: ± 1% at the AVR
terminals with a THC <5%.
Thermal drift: ± 1% for 30ºC change in temperature.
Response time: less than 50 ms.
Closed loop response: typically 0.5 sec to recover 98% of the defined voltage for a field forcing ratio of 1:2.
Sensing loss protection: the voltage
should disappear when the sensing circuit is open.
Overexcitation protection: 10 VDC to 85 VDC.
Set point: 60 VDC
Protection fuse: 4 A, 240 VAC.
Potentiometer sealing: except for the
V-trim potentiometer, all potentiometers are sealed.
Frequency roll-off indicator: LED provided (UF).
Sensing loss indicator: LED provided (SL).
Overexcitation indicator: LED provided (OE).
Protection on the devices: suitable R-C
snubber to be provided for the device used
to protect against voltage surges.
Potting/Encapsulation details: the
components on the AVR should be
completely encapsulated with suitable PU
resin compound to absorb transients/
vibrations during operation.
Alternator excitation details: (typical)
-Full load:
Excitation voltage: 40 to 50 V
Excitation current: 2.5 to 4.0 A
- Page 4 of 7
- Next page