Choose Engine Repair Parts at WDPART

7220 productos

Why choose engine repair parts at WDPART?

We offer various parts of many kinds different brands engines,including solenoids,sensors,fuel injectors,cylinder head repair parts,seals,belt tensioners,fuel pumps,alternator,starter motors and so on.All provide one year warranty,hassle return.

What services can we provide you?

1.OEM Quality: Efficient and economical repair of your machine, better quality and performance, saving your maintenance costs.
2.Tested and Approved: Extensive testing and a rigorous approval process ensure high quality standards for increased operational safety and peace of mind.
3.Extended Service Intervals: The guaranteed reliability of our OEM parts helps extend service intervals and significantly reduces the likelihood of repeating issues, increasing machine uptime and saving money in the long run.

Application:fit for Cummins 4BT/NT855,Perkins 400 series/100series,Woodwar 2000 series,John deere4045/9120,Bobcat225/743/751/2200/2300,Kubota V2403/V3307,Catepillar 226B/232B,Deuiz 2011......

Which engine repair parts can WDPART supply?

WDPART can supply include the enging parts,fuel system,cooling system,lubrication system,lgnition start system.

What are the detailed parts can we provide for you?

We mainly provide various brands of solenoid,sensor,full gasket set,overhaul rebuild kit,cylinder head,cylinder head gasket,cylinder liner,crankshaft,camshaft,piston&ring,con rod,main&con rod bearing,tubochager,muffler,belt tensioner,belts,seals,air compressor,water pump,water tank,radiator,thermostat,fan,oil cooler,fuel pump,fuel injector$nozzle,injection pump,fuel tank,filter,carburetor,wire harness,oil pump,oil filter,stater motor,alternator,ignition switch,ignition coil,starer relay,spark plug,ECU.

 

  •
    $713.00
    $713.00
    $0.00
    GAC ADB-225 Universal Actuators 225 Series - 2.2 Lb. Ft.
    GAC Governors America Corp 225 Series ADB225 Multi-Voltage Actuator
    (Multi VDC / MIL Connector / Diecast Housing)
    The 225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12 and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units, thus it provides a more stable and rapid response to transient conditions. Applications include fuel injection pumps, with or without mechanical governors, rotary type pumps, and medium-sized gaseous fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines. 
    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ADB-225

    Description:
    Universal Actuators 225 Series

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $599.00
    $599.00
    $0.00
    ADB-120-E4-HT GAC Electric Actuator with Fuel Metering Valve 12+24V
    Free Shipping
    Application:
    GAC Electric Actuator Controller

    Interchange part number: 
    ADB-120-E4-HT

    Description: 
    The ADB-120-E4-HT from HUEGLI-TECH / Governor America Corp. is a linear, proportional, electric fuel metering servo for use on Cummins engines with PT fuel systems. The actuator is energized by signals from a speed control unit and is capable of delivering fuel at rates up to 770 kg/h (1700 lbs/h).

    Condition:Original New
  • $584.00
    $584.00
    $0.00
    GAC ADB120 Universal Actuators 120 Series - 12 & 24 VDC
    120 Series – Universal
    The 120 SERIES electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12, 24, or 32-volt battery supplies.
    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ADB120

    Description:
    Universal Actuators 120 Series

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $925.00
    $925.00
    $0.00
    ACE-295F-24 GAC Actuator WDPART
    GAC Governors America Corp 295 Series ACE295F (24 Volt) Actuator
    (24VDC / Packard Connector / Position Feedback Sensor)
    The 295 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch-Style ¡°P¡± 9 and 10 pumps fuel-injected Pumps. Coupling the 295 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 295 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducer and heavy-duty bearing retention options are available.
    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ACE-295F-24 ACE295F-24

    Description:
    Actuator

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
    POWER INPUT
    Operating Voltage 24 V DC
    Normal Operating Current 2.4 A
    Maximum Current Continuously Rated 4.5 A
    Coil Resistance 4.7 ± 0.2 Ω

    ENVIRONMENT
    Operating Temperature Range -40 to +185 °F [-40 °C to +85 °C]
    Relative Humidity up to 100 %
    All Surface Finishes Fungus Proof and Corrosion Resistant
  •
    $904.00
    $904.00
    $0.00
    GAC ACE295-24 Integrated Pump Mounted Actuators 295
    The 295 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch-Style “P” 9 and 10 pumps fuel-injected Pumps. Coupling the 295 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 295 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducer, and heavy-duty bearing retention options are available.
    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ACE295-24

    Description:
    Integrated Pump Mounted Actuator

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $219.99
    $219.99
    $0.00

     

    ACD175A-24 Integrated Pump Mounted Actuators 175/176

    Free Shipping!

     

    Interchange part number:

    ACD175A-24

     

    Description:

    Integrated Pump Mounted Actuators

     

    Condition:New,Replacement

    The 175 Series Integrated Pump Mounted Actuators are field proven proportional actuators designed to mount directly to fuel injection Bosch-style pumps to achieve an integrated proportional servo fuel package. Since the design has no sliding parts and its components are sealed; outstanding reliability results with no maintenance required. The design is versatile with numerous options and mounting kits available in order to adapt to other fuel pumps.

    24 V DC

    Packard Connector without Mating Connector

    Double Rack Bearing

    BYC ASIMCO KT283 Included

    ELECTRICAL POWER INPUT \ OUTPUT

    Operating Voltage 24 V DC

    Nominal Operating Current 2.0 A (24 V DC)

    MAX Continuous Current 3.1 A (24 VDC)

    Nominal Coil Resistance 7.1 Ω Nominal (24 V)

     

    Environmental

    Operating Temperature -40 to 200 °F [-40 to 95 °C]

    Relative Humidity Up to 100 %

  •
    $505.00
    $505.00
    $0.00
    GAC ACD175A-12 Integrated Pump Mounted Actuators 175
    The 175 Series Integrated Pump Mounted Actuators are field proven proportional actuators designed to mount directly to fuel injection Bosch-style pumps to achieve an integrated proportional servo fuel package. Since the design has no sliding parts and its components are sealed; outstanding reliability results with no maintenance required. The design is versatile with numerous options and mounting kits available in order to adapt to other fuel pumps.
    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ACD175A-12

    Description:
    Actuator

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $711.00
    $711.00
    $0.00
    ACD-110A-24 GAC Actuator for Deutz 1011 24V
    Free Shipping

    Application:
    GAC Actuator Deutz 1011 24V

    Interchange part number: 
    ACD-110A-24

    Description: 
    Actuator Deutsch Connector without Mating Connector

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

     

    POWER Input:
    Operating Voltage 24 VDC
    Normal Operating Current 2.0 A at 24 V DC
    Maximum Current (Continuous) 3.5 A at 24 V DC

    Environmental:
    Operating Temperature Range -40 to 212 °F [-40 to 100 °C]
    Relative Humidity up to 100 %
    All Surface Finishes Fungus proof and corrosion resistant

    Mounting:

    Directly on Deutz 1011 type 2, 3, 4 cylinder engines

    MATING HARDWARE:
    Wiring Harness 2-wire with Automotive Connector (not included with actuator - CH1110)
    Mating Half Connector Connector (included w/ ACE110 Series - EC1120)

  •
    $710.00
    $710.00
    $0.00
    ACD-110A-12 GAC Actuator for Deutz 1011 12V
    Free Shipping
    Application:
    GAC Actuator Deutz 1011 12V

    Interchange part number: 
    ACD-110A-12

    Description: 
    Actuator Deutsch Connector without Mating Connector

    POWER Input
    Operating Voltage：12V
    Normal Operating Current 4.0 A at 12 V DC
    Maximum Current (Continuous) 7.0 A at 12 V DC

    Environmental:
    Operating Temperature Range -40 to 212 °F [-40 to 100 °C]
    Relative Humidity up to 100 %
    All Surface Finishes Fungus proof and corrosion resistant

    PHYSICAL:
    Mounting Directly on Deutz 1011 type 2, 3, 4 cylinder engines

    MATING HARDWARE:
    Wiring Harness 2-wire with Automotive Connector (not included with actuator - CH1110)

    Mating Half Connector Connector (included w/ ACE110 Series - EC1120)

    Condition:New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $1,269.00
    $1,269.00
    $0.00

    275 Series Bosch P Pump-Mounted Actuator
    275 Series Direct to Bosch P3000, 7100, 8000, RP21 Series – Installation Kit KT286 (Gasket and Hardware) Included

    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ACB275H-S1

    Description:
    Actuator 275 Series

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.


    The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch style P 3000–7000 fuel-injected pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Its two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducers and heavy-duty bearing retention options are available.

    275 Series Actuator – Multi-V DC – Military-Style Connector without Mating Connector – Stop Lever LE1400-4 Included

    Optimum performance for in-line pumps
    Includes manual rack return mechanism
    Stop lever
    Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
    Control up to 12-cylinder pumps
    Adjustable maximum fuel limit

  •
    $1,269.00
    $1,269.00
    $0.00
    GAC ACB275H Integrated Pump Mounted Actuators 275
    GAC Governors America Corp 275 Series ACB275H Multi-Voltage Actuator
    (Multi VDC / MIL Connector)
    The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch-Style ¡ãP¡À 3000-7000 fuel injected Pumps. Coupling the 275 Series with a fuel pump results in a high-performance fuel control system without external linkages or brackets. Two isolated chambers eliminate the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducer, and heavy-duty bearing retention options are available.
    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ACB275H

    Description:
    Actuator

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $1,233.00
    $1,233.00
    $0.00
    ACB-275C GAC Actuator MTU SPEC WDPART
    Free Shipping
    Description: 
    ACB275C. The 275 Series Electric Actuator is a second-generation design more powerful than its predecessor. It is for Bosch-Style ¡°P¡± 3000-7000 fuel injected Pumps. Coupling the 275 Series with a fuel pump results in a fuel control system without external linkages or brackets. Two isolated chambers the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducer, and heavy-duty bearing retention options are available.
    Interchange part number: 
    ACB-275C

    Condition:Original New
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Optimum performance for in-line pumps
    Includes manual rack return mechanism
    Stop lever
    Mounts Directly on Bosch P and RP 21 fuel injection pumps in place of mechanical governor
    Control up to 12-cylinder pumps
    Adjustable maximum fuel limit
  •
    $688.00
    $688.00
    $0.00
    ADD-120S-12 GAC Actuator WDPART
    ADD120S-12. The 120 SERIES electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12, 24, or 32-volt battery supplies.
    Packard Connector without Mating Connector.
    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ADD-120S-12 

    Description:
    120 Series Electric Actuator

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $733.00
    $733.00
    $0.00
    ADD-225GSC-12 GAC Actuator GAC Governors America Corp
    GAC Governors America Corp 225 Series ADD225GSC (12 Volt) Actuator
    (12 or 24 VDC / Packard Connector with Mating Connector / Lesser Rate Return Spring)
    The 225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12 and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units, thus it provides a more stable and rapid response to transient conditions. Applications include fuel injection pumps, with or without mechanical governors, rotary type pumps, and medium-sized gaseous fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.

    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ADD-225GSC-12

    Description:
    Actuator

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $289.00
    $289.00
    $0.00

    Electric Actuator ADC225-24V for GAC Governors America
    Free Shipping!
    Application:
    GAC Governors America Corp 225 Series

    Interchange part number: 
    ADC225-24V

    Description: 
    Electric Actuator

    Condition:New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $358.00
    $358.00
    $0.00

    Actuator For GAC ADC120 24V ADC120-24V
    Free Shipping!
    Application:
    GAC

    Interchange part number: 
    ADC120 24V ADC120-24V

    Description: 
    External electronic driver for automatic actuator generator GAC adc120 24 V Generator Electron Actuator

    Condition:New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $168.90
    $168.90
    $0.00

    Electric Actuator ADB ADC225-12V for Generator Actuator
    Free Shipping!
    Application:
    Generator Governor Actuator

    Interchange part number: 
    ADC225-12V

    Description: 
    Electric Actuator

    Condition:New

  •
    $259.00
    $259.00
    $0.00

    Electronic Actuator ADC120 12V
    Free Shipping!
    Application:
    GAC

    Interchange part number: 
    ADC120 

    Description: 
    Electronic Actuator

    Condition:New

  •
    $379.00
    $379.00
    $0.00
    GAC Speed Control ESB1000 24V
    Free Shipping
    Application:
    GAC 

    Interchange part number: 
    ESB1000 

    Description: 
    Speed Control

    Condition:New, Original


    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $1,187.00
    $1,187.00
    $0.00
    Actuator for GAC ATB552T2N-12 55mm Integral Throttle Body
    Free Shipping
    Application:
    GAC ATB552T2N-12 55mm Integral Throttle Body
    Power Input
    Operating Voltage 12V DC
    Normal Operating Current 6.0 A at 12 V DC
    Maximum Current 9.0 A at 12 V DC
    Coil Resistance (Red to White 12 V DC) 1.4 Ω 5.3 Ω

    Environment
    Normal Ambient Operating Temperature Range -40° to 200° F [-40° to 95° C]
    High Temperature Ambient Operating Temperature Range -40° to 250° F [-40° to 125° C]
    All Surface Finished Fungus & Corrosion Resistant


    Interchange part number: 
    ATB552T2N-12

    Description: 
    Governors America Corp Actuator

    Condition:New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

Go to full site