Collection: Choose AVR at WDPART
We offer AVR parts with OEM quality and widen usage. We offer replacement
AVR parts used for Honda, Leroy Somer, Generator Gensets and so on.
Application:Marathon and stamford alternator,FG Wilson genset with Perkins engine,Leroy Somer Generator,Caterpillar CAT engine,Kutai,Denyo 45ESI 150SPM 150ESK Genset Generator......
What are the signs of a faulty AVR in a generator?
1 - Unstable generator engine speed.
2 - Current overload.
3 - Power surge.
4 - Short circuit.
5 - Age.
What causes an AVR to fail?
It was concluded that the cause of AVR damage was due to the generator driving motor which experienced a decrease in performance so that when subjected to electric load the engine rotation experienced instability which caused voltage fluctuations where this caused the AVR to work abnormally resulting in AVR damage.
-
- Precio regular
- $60.00
- Precio de venta
- $60.00
- Precio regular
-
$0.00
Automatic Voltage Regulator AVR Stamford AS480 E000-14808
Free ShippingApplication:FG Wilson genset with Perkins engine
Interchange part number:Stamford Model # AS480Cummins Part # E000-14808/1PKubota G3362-02802
Description:Automatic Voltage Regulator AVR
Condition: New, replacement -
- Precio regular
- $105.80
- Precio de venta
- $105.80
- Precio regular
-
$0.00
Free Shipping!
Application:
Generator Genset
Interchange part number:
AVC63-4D AVC634D
Description:
Automatic Voltage Regulator
Condition: Replacement New
VOLTAGE BUILDUP:
Internal provisions for automatic
voltage buildup from generator residual voltages as low
as 6 Vac.
TERMINATIONS:
1/4” “Fast-On” Terminals.
POWER DISSIPATION:
8 Watts maximum.
OPERATING TEMPERATURE:
-40°C (-40°F) to
+60°C (+140°F).
STORAGE TEMPERATURE:
-65°C (-85°F) to +85°C
(+185°F).
VIBRATION:
Withstands 1.3 Gs at 5 to 26 Hz; 0.036”
double amplitude at 27 to 52 Hz; and 5 Gs at 52 to
1000 Hz.
SHOCK:
Withstands up to 20 Gs in each of three
mutually perpendicular axes.
ACCESSORY
Remote Adjustment Rheostat: 1000 ohm, 2W rheostat
with locking slotted shaft, Basler Electric P/N 17727.
DC OUTPUT POWER:
4 Adc at 63 Vdc maximum
continuous, 7 Adc at 100 Vdc one minute forcing.
(Forcing with 240 Vac nominal input).
EXCITER FIELD DC RESISTANCE:
15 ohms mini-
mum; 100 ohms maximum.
AC SENSING/POWER INPUT:
Operating range:
190-240 Vac single phase ±10%, 50/60 Hz ±10%.
Burden 500VA.
VOLTAGE ADJUST RANGE:
171-264 Vac.
REGULATION ACCURACY:
Better than ±1.0%
no load to full load.
RESPONSE TIME:
Less than 1.5 cycles for ±5%
change in sensing voltage. -
- Precio regular
- $63.00
- Precio de venta
- $63.00
- Precio regular
-
$0.00
Free Shipping!
Application:
Basler VR63-4C Regulator
Interchange part number:
EA04C
Description:
Automatic Voltage Regulator AVR
Sensing Input Voltage 160~265 VAC / 300~550 VAC single phase
Frequency 50/60 Hz selectable
Power Input 90~240 VAC single phase
Output Voltage Max. 32 VDC @ 120 VAC input , Max. 63 VDC @ 240 VAC input
Current Continuous 4A, Intermittent 7A for 60 sec.
Resistance Min. 15 Ohm Max. 100 Ohm
Voltage Regulation <±1% (with 4% engine governing)
Voltage Build-up Residual voltage at AVR terminal > 5 VAC
External Volts Adjustment ±15% with 1 K Ohm 1 watt trimmer
Unit Power Dissipation Max. 8 watt
EMI Suppression Internal electromagnetic interference filtering
Thermal Drift 0.05% per °C change in AVR ambient
Under Frequency Protection U/F Knob 43~60 Hz
Over Excitation Shutdown Field volts shut down after a time delay if exciter field volts exceed 100 ±5 VDC
Environment Operating Temperature : -40~60 °C Storage Temperature : -40~85 °C
Relative Humidity : Maximum 95%
Vibration : 1.5G @ 5~30 Hz / 5.0G @ 30~500 Hz
AVR Controls Functions VOLT : Voltage Adjustment
STAB : Stability Adjustment
HZ : 50/60 Hz Selectable
Condition:New,Replacement
- Page 2 of 7
- Next page