Choose Controller at WDPART

157 productos

What is genset controller?
Genset Controller is used to control the functioning of the genset system. A genset controller provides various monitoring functions of a genset, monitoring of various electrical parameter like voltage, current, frequency, power etc. It also has capability to measure the temperature, oil level/ pressure etc.

How do I know my generator set controller needs replacing?
1. The generator runs slower than usual.
2. The generator makes abnormal noise.
3. The generator output power is low and lower than the normal power.

Why choose Controller at WDPART?
We offer various brands of controllers with high quality. The brands we offered are DeepSea,Smartgen and others. Alternative OEM and original parts available.

Which Controllers does WDPART supply?
WDPART can provide original or aftermarket controllers of deep sea, smartgen, and Cummins brands. Hot sale Controller models: DSE6110, DSE7210, DSE702MS, DSE704, DSE4420, DSE701, DSE7220, DSE7410 MKII, AMF25, AMF20, DSE7420 and so on.

 

  •
    $275.80
    $275.80
    $0.00
    WDPART Control Module DSE6110 for Deep Sea Generator
    Free Shipping
    Interchange part number:
    DSE6110

    Description:
    The DSE6110 is an Auto Start Control Module suitable for a wide variety of single gen-set applications.

    Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature, and fuel level, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.

    Condition: New,Replacement

    Features
    The back-lit text LCD display
    Front panel editing
    LED and LCD alarm indication
    Power Save mode
    CAN and Magnetic Pick-up/Alt. versions available (specify on ordering)
    PC and front panel configuration
    6 Digital inputs
    3 Analog inputs
    6 Outputs (4 configurable on Magnetic Pick-up/Alt., 6 configurable on CAN version)
    Configurable timers and alarms
    Alternative configuration
    Event Log (10)
    Remote Start input
    3 Phase generator monitoring
    Current Monitoring and protection
    Battery voltage monitoring
    Engine pre-heat
    Hours counter
    Comprehensive shutdown or warning on fault condition

    Specification
    Operating Voltage DC8.0V to DC35.0V, Continuous Power Supply.
    Alternator Input Range 15V - 360 V AC (ph-N)
    3-Phase4-Wire 26V - 620 V AC (ph-ph)
    3-Phase3-Wire 15V - 360 V AC (ph-N)
    Single-phase2-wire 15V - 360 V AC (ph-N)
    2-Phase3-Wire:
    Alternator Frequency 50/60Hz
    Speed Sensor voltage VPP 2.2 - 100Vpp (Peak to peak)
    Speed Sensor Frequency 10000Hz (max)
    Start Relay Output 16Amp Controller Power Voltage Output
    Fuel Relay Output 16Amp Controller Power Voltage Output
    Programmable Relay Output 1 7Amp 250VAC Voltage Free Output
    Programmable Relay Output 2 7Amp 250VAC Voltage Free Output
    Programmable Relay Output 3 16Amp 250VAC Voltage Free Output
    Programmable Relay Output 4 16Amp 250VAC Voltage Free Output
    Case Dimension 210mm x 152 mm x 48 mm
    Panel Cutout 186mm x 141mm
    C.T. Secondary 5A Rated
    Protection Level IP55:When waterproof rubber seal installed between the controller and panel fascia.
    IP42: When a waterproof rubber seal is not installed between the controller and the panel fascia.
    Insulating Intensity Object: input/output/power
    Quote standard: IEC688-1992
    Test way: AC1.5kV/1min leakage current:3mA

  •
    $54.00
    $54.00
    $0.00
    Generator Controller DSE702MS Manual Start Generator Controller for Deep Sea
    Free Shipping
    Interchange part number:DSE702MS
    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Features:
    1. Microcomputer control also can manually start and stop.
    2. LED indicating fault information, which is convenient to use.
    3. Compact size, lightweight, practical and easy to use.
    4. Solid structure, low noise, stable working performance.
    5. Using high-quality glass resistor, working temperature: -55°C ~ 350°C.
    6. High-quality potentiometer, smooth adjustment, not easy to damage, 100% imported original IC.
    7. High precision of resistance, wide operating temperature, small drift, and good stability.
    8. High-quality capacitors, good parameter consistency, and high reliability.

    Specification:
    Condition: 100% Brand New
    Item Type: Generator Controller
    Material: Plastic
    Model: DSE702MS
    Mounting Hole Size: Approx. 68 * 68mm / 2.7 * 2.7in

    Package List:
    1 * Generator Controller
    2 * Fixing screw
    2 * Key

    Note:
    1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
  • $258.00
    $258.00
    $0.00
    DSE7210 Electronic Control Module Panel For Deepsea
    Free Shipping
    Interchange part number:DSE7210

    Description:
    1.    Large back-lit text LCD display.
    2.CAN and magnetic pick-up sensing.
    3.3-phase generator sensing.
    4.Configurable inputs/outputs (6/8).
    5.Power monitoring (kW h, kV Ar, kV Ah, kV Ar h)

    Specification:
    Material: Plastic
    Model: DSE7210
    Output:
    Power supply voltage output A (fuel) : 15 A DC
    Power supply voltage output B (start) : 15 A DC
    Output C&D: 8 A 250 V (no voltage)
    Auxiliary output under the power supply voltage: E, F, G, H 2 A direct current
    Generator:
    Voltage range: 15 V-333 V AC (L-N)
    Frequency range: 3.5 Hz to 75 Hz
    Magnetic pickup:
    Voltage range: +/- 0.5V to 70V
    Frequency range: 10000 Hz (maximum)

    Package List:
    1 x Generator Controller    1 x Black Gasket        4 x Set Screws

    Condition: 
    New
  •
    $369.00
    $369.00
    $0.00
    Deep Sea DSE4420 Auto Mains Failure Control Module
    Free Shipping
    Application： MPU Controller Deep Sea

    Interchange part number:    DSE4420

    Description:
    The DSE Configuration Suite Software Installer should be installed to your laptop/PC hard drive. Once installed the software will be ready for use immediately. To begin configuring your module type, start by selecting the module you are using. Configurations can then be created and saved for future use. 

    OVERALL SIZE：180 mm x 116 mm x 42 mm (7.1” x 4.6” x 1.7”) 
    PANEL CUTOUT SIZE：154 mm x 98 mm (6.0" x 3.9")

    MAXIMUM PANEL THICKNESS：8.0 mm (0.3”)

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $179.00
    $179.00
    $0.00
    SmartGen CMM366-ET Cloud Monitoring Modem with Wired Ethernet
    SmartGen CMM366-ET Cloud Monitoring Modem
    CMM366-ET Cloud Monitoring Communication Module is an Ethernet communication protocol switch module that can achieve Genset (with SCI) connect to the Internet. The module obtains Genset data via RS485 port, USB port, LINK port or RS232 port of Genset controller modules of international first-class brands including SmartGen, DeepSea, ComAp, etc. Then the module transmits the data to a corresponding cloud server via wired Ethernet for achieving user¡¯s real-time monitoring to running status and searching of running records via APP (IOS or Android) and pc terminal devices.
    CMM366-ET module has already integrated protocols of the mainstream Genset control module. It not only can achieve Genset monitoring but also can insert some digital alarm input/output signal to achieve the monitoring of the generator room entrance guard, guard against theft and fire facilities.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    CMM366-ET

    Description:
    Cloud Monitoring Modem

    Condition: Original SmartGen New
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $80.00
    $80.00
    $0.00
    Generator Controller Module DSE704 for Deep Sea
    Free Shipping
    Interchange part number:DSE704

    Condition: New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Feature:
    The products are made of high quality electronic components, and the performance is stable and reliable. Suitable for diesel generator equipment. DC power supply: 8-35V continuous. It can maintain stable performance and reliability in harsh environments. With strict electromagnetic testing, the product is of high quality. 

    Specification:
    Model: DSE704
    DC power supply: 8-35V continuous
    Maximum current: 50mA working,  10mA standby
    Electric ball input range: 75 (middle line) to 277 (middle line) 3-phase 4-wire exchange (+20%)
    Electric ball input frequency: 50-60Hz at rated engine speed (minimum: 75V AC neutral line) (starting off from 15V center line)
    Start output: 1.2A DC supply voltage

    Package list:
    1 * Generator Module Control Panel

  •
    $76.00
    $76.00
    $0.00
    Deep Sea DSE701 Manual Auto Start Control Module
    Free Shipping

    Interchange part number: DSE701

    Condition: Replacement New


    Description:
    The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
    Additionally, the Autostart versions (701AS) of the controller will respond to a remote switched input to begin the start sequence.
    Power Supply: DC 8 to 35 V Continuous & Cranking Dropouts: Able to survive voltage dips during cranking. Without the need for internal batteries.
    Alternator Input Range :15-305V AC RMS (+20%) & Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
    Overspeed: nominal frequency +14% (+24% Overshoot) & Start Output: Solid State 1.2A negative grounding terminal & Run Output: Solid State 1.2A negative grounding terminal & Pre-heat Output: Solid State1.2A negative grounding terminal & Operating Temperature Range: -30 to +70C
    The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
    Additionally, the Autostart versions(701as) of the controller will respond to a remote switched input to begin the start sequence.
    Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.
    Style: 701MS (Manual) 701AS (Auto)
    Power Supply: 8 to 35 Vdc Continuous
    Cranking Dropouts: Able to survive voltage dips during cranking.Without the need for internal batteries.
    Alternator Input Range :15 - 305 V AC RMS (+20%)
    Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
    Overspeed: nominal frequency +14% (+24% Overshoot)
    Start Output: Solid State 1.2A negative grounding terminal
    Run Output: Solid State 1.2A negative grounding terminal
    Pre-heat Output: Solid State1.2A negative grounding terminal
    Operating Temperature Range: -30 to +70C
  •
    $81.00
    $81.00
    $0.00

    DSE5110 Generator Electronic Controller Control Module
    Free Shipping
    Interchange part number:     DSE5110

    Description: 
    Features: |
    1. 132 x 64 pixel LCD display, easy to read data. 
    2. Accurately display time and record time. 
    3. Multiple start and stop cycles can be preset. 
    4. Maintenance cycle reminder function can be preset. 
    5. Remote monitoring through the network (with DSE855). 
    Model: DSE5110 
    Power supply: DC 8~35V continuous Start relay 
    output:16AmpDC system DC voltage Fuel relay 
    output: 16Amp DC system DC voltage Auxiliary relay 
    output: 5Amp DC system DC voltage Operating temperature range: -30 ~ +70C Charging failure/excitation 
    range: 0V~35V Maximum operating
     current: 425(12V); 215MA (24V)

    Condition: New,Replacement

  •
    $89.00
    $89.00
    $0.00

    WDPART Deep Sea Controller Panel Module DSE703
    Free Shipping
    Interchange part number:     DSE703

    Description: 
    Automatic mains (utility) supply monitoring
    Load changeover control
    Manual start
    Protected solid state (PSS) outputs
    Front panel mounting
    Front panel programming
    LED indicators
    Configurable timers
    Configurable outputs
    Single/three phase mains sensing

    Condition: Replacement New

  •
    $759.00
    $759.00
    $0.00
    Original DSE7410 MKII genset auto start control module
    Free Shipping
    Application：
    genset

    Interchange part number:
    DSE7410

    Description:
    MKII genset controller auto start control module 

    PRODUCT VARIANTS
    7410-03 – 7410 MKII Auto Start Control Module
    7410-04 – 7410 MKII Auto Start Control Module (Htr)

    Condition: New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $258.00
    $258.00
    $0.00
    Free Shipping!
    Application:
    Genie Lift GS-1530;GS-1532;GS-1930;GS-1932;GS-2032;GS-2046;GS-2632;GS-2646;GS-2646 AV;GS-2646 AV35;GS-3232;GS- 3246;GS-4047

    Interchange part number:
    1257840 1257840GT

    Description:
    24V 360A Motor Controller

    Condition:New,Replacement
  • $1,577.00
    $1,577.00
    $0.00
    Free Shipping!
    Application:
    Caterpillar 330B L Excavator 6DR00001-UP (MACHINE) POWERED BY 3306 Engine
    W330B MH Excavator AME00001-UP (MACHINE) POWERED BY 3306 Engine

    Interchange part number:
    164-8255, 1648255, CA1648255

    Description:
    Cab Controllor Panel ECU

    Condition:New
  • $3,526.00
    $3,526.00
    $0.00
    Free Shipping!
    Application:
    Caterpillar 312D, 315DL, 308D, 319D, 319DL, 320D, 320DL, 323DL, 324DL, 329DL, 325DL, 320D

    Interchange part number:
    221-8874, 2218874, CA2218874

    Description:
    Controller E-ECU

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $826.00
    $826.00
    $0.00

    Free Shipping!
    Application:
    Bobcat Loader: S100, S150, S160, S175, S185, S220, S650, S740, T870

    Interchange part number:
    7260936

    Description:
    Controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
     

  •
    $342.00
    $342.00
    $0.00
    Free Shipping
    Application:
    ComAp Generator

    Interchange part number: 
    IL-NT-AMF8 AMF 8 InteliLite NT AMF8

    Description: 
    Controller InteliLite NT

    Condition:New
  • $443.00
    $443.00
    $0.00
    Controller InteliLite NT MRS 16 Aftermarket MRS16 Control
    Free Shipping
    Application:
    ComAp Gen-set

    Interchange part number: 
    MRS16

    Description: 
    Controller InteliLite NT

    Condition:New
  • $360.80
    $360.80
    $0.00
    Controller InteliLite NT AMF25 AMF-25 Aftermarket Control Panel
    Free Shipping
    Application:
    ComAp Gen-set

    Interchange part number: 
    AMF25 AMF-25 

    Description: 
    Controller InteliLite NT

    Condition:New
  • $444.00
    $444.00
    $0.00
    Controller InteliLite NT MRS 10 Aftermarket MRS10 Control
    Free Shipping
    Application:
    ComAp Gen-set

    Interchange part number: 
    MRS 10

    Description: 
    Controller InteliLite NT

    Condition:
    New
  • $308.00
    $308.00
    $0.00
    Controller InteliLite NT AMF20 AMF-20 for ComAp Gen-set
    Free Shipping!
    Application:
    ComAp Gen-set

    Interchange part number: 
    AMF20 AMF-20

    Description: 
    Controller InteliLite NT

    Condition:
    New
  • $1,294.00
    $1,294.00
    $0.00
    Free Shipping
    Application:
    CUMMINS:
    ISBe ISDe QSB 6BT Engin
    Cummins ISB 3.9L 4-Cyl Diesel Engine

    DAF:
    DAF CF 65.180 136kW 02/2001 - 07/2006, DAF CF 65.220 162kW 01/2001 - 01/2007, DAF CF 65.250 184kW 03/2001 - 09/2006, DAF LF 45.130 99kW 11/2001 - 09/2006, DAF LF 45.150 110kW 04/2001 - 10/2007, DAF LF 45.170 123kW 04/2001 - 12/2007, DAF LF 45.180 136kW 07/2001 - 12/2008, DAF LF 45.220 162kW 11/2001 - 01/2009, DAF LF 55.180 136kW 04/2001 - 08/2008, DAF LF 55.220 162kW 04/2001 - 08/2008, DAF LF 55.250 184kW 04/2001 - 08/2008, PAZ PAVLOVO 3237 110kW 01/2000
     

    Interchange part number: 
    Cummins: 4898112
    Bosch: 0281010254
    DAF: 1399536

    Description: 
    Engine Controller

    Condition: New

Go to full site