Choose Controller at WDPART

149 productos

What is genset controller?
Genset Controller is used to control the functioning of the genset system. A genset controller provides various monitoring functions of a genset, monitoring of various electrical parameter like voltage, current, frequency, power etc. It also has capability to measure the temperature, oil level/ pressure etc.

How do I know my generator set controller needs replacing?
1. The generator runs slower than usual.
2. The generator makes abnormal noise.
3. The generator output power is low and lower than the normal power.

Why choose Controller at WDPART?
We offer various brands of controllers with high quality. The brands we offered are DeepSea,Smartgen and others. Alternative OEM and original parts available.

Which Controllers does WDPART supply?
WDPART can provide original or aftermarket controllers of deep sea, smartgen, and Cummins brands. Hot sale Controller models: DSE6110, DSE7210, DSE702MS, DSE704, DSE4420, DSE701, DSE7220, DSE7410 MKII, AMF25, AMF20, DSE7420 and so on.

 

  •
    $148.00
    $148.00
    $0.00
    SmartGen HT10M Engine with (0~7) L displacement with the function 
    PERFORMANCE AND CHARACTERISTICS:
    1. Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low-temperature capability;

    2. Stainless steel inner pipes and end closure with high corrosion resistance;
    3. Coolant temperature is controlled by a thermostat which is installed within the heater. It has simple connections and high reliability;
    4. power, heating and overheat protection light indicators make it easy to observe the heater status;
    5. There is a water drain valve with a seal ring on the bottom of the heater so as to be used when needed;
    6. Users can press the “Test” button to test-run the machine in the extremely high ambient temperature;
    7. Overheating thermostat provides the protection of dry heating and overheating;
    8. Multiple installation ways apply to different installation situations;
    9. This product can work normally at -25 ºC temperature.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HT10M

    Description:
    Displacement with the Function of Test-run the machine

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $905.00
    $905.00
    $0.00
    SmartGen HWP90 Engine Heater Suitable for various engine
    Free Shipping
    HWP series forced circulation water engine heater is composed of 3 parts: control section, water pump and water heater.
     
     If during cranking the outside temperature is lower than 4ºC, engine coolant and lubricant may condense into solid state and lose their lubricating and cooling properties, which can damage the engine. Engine heater should be installed to ensure normal starting and running of the engine when the outside temperature is lower than 4 ºC.
     
     HWP series forced circulation water engine heater combines the following features: cast stainless steel inner pipes and end closure with high corrosion resistance; heating and overheat light indicators; user-defined thermostat set point; dry heating and overheat protection.
     
     This product is suitable for various engine with (15~100)L displacement.
     
     PERFORMANCE AND CHARACTERISTICS:
     1.     The circulating water pump adopts special customized pump with stainless steel pump head for good mute effect, reliable and safe and long lifetime.
     2.     Control section: microprocessor design; high sampling precision and accuracy control due to PT100 temperature sampling. Coolant temperature can be set via the control panel. Four digital LED display, coolant temperature and all kinds of set point temperature can be displayed clearly.
     3.     Dry heating and overheat protection.
    4. Separately control of water pump and water heater: power on the water pump and water heater synchronously, once the set temperature has reached, water heater will be powered off firstly, after 3s, following is water pump. The goal is to prevent heat concentration and significantly prolong water pump lifetime.
    5. Manual test: test the water heater and water pump are normally or not via panel button.
    6. Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low temperature capability;
    7. Stainless steel inner pipes and end closure with high corrosion resistance;
    8. There is a water drain valve with seal ring on the bottom of the heater so as to be used when needed;
    9. There is one-way inlet valve on the water inlet.
    10. This product can work normally at -25℃ temperature.
  •
    $270.00
    $270.00
    $0.00

    HAT552 Dual Power ATS Controller for SmartGen AC177-277V
    Free Shipping!
    Application:
    SmartGen HAT552 AC177-277V with Interface RS485

    Interchange part number: 
    HAT552 

    Description: 
    Controller 

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $276.00
    $276.00
    $0.00

    HAT553 Dual Power ATS Controller for SmartGen AC177-277V
    Free Shipping!
    Application:
    SmartGen HAT553 AC177-277V with Interface RS485

    Interchange part number: 
    HAT553 

    Description: 
    Controller 

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $319.00
    $319.00
    $349.00
    SmartGen HGM7210 Genset Controller DC Genset Controller
    Free Shipping
    Application:
    SmartGen 

    Interchange part number: 
    HGM7210 

    Description: 
    Controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Technical Specifications:
    1. Function Item Parameter
    2. Display: LCD(132*64)
    3. Operation Panel: Silicon Rubber
    4. Language: Chinese & English & Others
    5. Digital Input: 7
    6. Relay Output: 8
    7. Analogue Input: 5
    8. AC System: 1P2W/2P3W/3P3W/3P4W
    9. Alternator Voltage: (15~360)V(ph-N)
    10. Alternator Frequency: 50/60Hz
    11. Monitor Interface: RS485
    12. Programmable Interface: USB/RS485
    13. DC Supply: DC(8-35)V
    14. Case Dimensions(mm): 197*152*47
    15. Panel Cutout(mm): 186*141
    16. Operating Temp.: (-25~+70)℃
  •
    $149.00
    $149.00
    $0.00
    SmartGen HT22M Engine with (7~13) L displacement
    PERFORMANCE AND CHARACTERISTICS
    Fine cast aluminum enclosure and special surface treatment with high corrosion resistance and high/low-temperature capability;
    Stainless steel inner pipes and end closure with high corrosion resistance;
    Coolant temperature is controlled by a thermostat which is installed within the heater. It has simple connections and high reliability;
    power, heating and overheat protection light indicators make it easy to observe the heater status;
    There is a water drain valve with a seal ring on the bottom of the heater so as to be used when needed;
    Users can press the “Test” button to test-run the machine in the extremely high ambient temperature;
    Overheating thermostat provides the protection of dry heating and overheating;
    Multiple installation ways apply to different installation situations;
    This product can work normally at -25 ºC temperature.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    HT22M

    Description:
    Engine with (7~13) L Displacement

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $152.00
    $152.00
    $0.00
    SmartGen HGM1790N Generator Pump Controller Module
    Free Shipping!
    Application:
    SmartGen 

    Interchange part number: 
    HGM1790N 

    Description: 
    Controller 

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $84.00
    $84.00
    $0.00
    Smartgen MGC100 Manual Remote Start Generator Controller
    Free Shipping!
    Application:
    Smartgen 

    Interchange part number: 
    MGC100 

    Description: 
    generator controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $683.00
    $683.00
    $0.00
    Application：
    genset

    Interchange part number:
    DSE7420 MKII

    Description:
    MKII genset controller auto start control module 
    OVERALL SIZE
    245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”)
    PANEL CUTOUT SIZE
    220 mm x 160 mm (8.7" x 6.3")
    Product Variants
    7420-03 - 7420 MKII Auto Mains (Utility) Failure Control Module
    7420-04 - 7420 MKII Auto Mains (Utility) Failure Control Module (Htr)

    Condition: New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $269.00
    $269.00
    $0.00
    DSE6020 MKII AMF Module Controller Fits for Generator
    Free Shipping

    Application:
    Generator

    Interchange part number: 
    DSE6020 

    Description: 
    Module Controller 

    Condition:New,Replacement

    Product Details:
    DSE 6020 AMF module,The control system is an integral part of the unit and also the heart of the unit. The application of the intelligent control system in the unit is helpful to improving the quality of the electric energy and the automation level of the diesel unit.

    1: Standard screen: Namely manual control screen. You only need to connect the start battery to control the unit locally.
    2: Self-start control screen: The unit can realize both local manual control and remote control (by the external signal line). You need to connect the signal control line to this screen correctly
    3: “Three-remote” communication fully automatic control screen: On the basis of the “self-start control screen” function, it also has the communication mode
    4: It is used in the automation and monitoring system of single unit. It has many functions like automatic startup/shutdown, data measurement, alarm protection and “three-remote". The controller has large LCD display and Chinese/English interface, realizing simple operation and reliable running.
    Continuous Voltage Rating
    8 V to 35 V Continuous

    Maximum Operating Current
    100 mA at 12 V, 105 mA at 24 V

    Maximum standby current
    60 mA at 12 V, 55 mA at 24 V

    Frequency range
    3.5 Hz to 75 Hz

    Configurable as:
    Negative switching digital input
    0 Ω to 480 Ω
    Analogue input D
    Configurable as:
    Negative switching digital input
    0 V to 10 V
    4 mA to 20 mA
    0 Ω to 480 Ω
    Auxiliary Outputs C, D, E & F
    2 A DC at supply voltage
  •
    $1,539.00
    $1,539.00
    $0.00
    Generator Controller DSE8610 for Deep Sea
    Interchange part number:DSE8610 

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Deep-Sea Electronics DSE8610 Synchronising & Load Sharing Control Module

    The DSE8610 is an intelligent mono display auto-start load share control module packed with industry-leading features to enhance multi-set control. The module can be synchronized with up to 32 generators within the same system.
    OVERALL SIZE:240 mm x 181 mm x 42 mm 

    Key Features and Benefits:
     32-set synchronization.

     It offers optimum flexibility for system expansion.

    Configurable inputs/outputs (11/8).

    It provides multiple installation options.

    Dead bus sensing.

    It provides rapid power delivery on multi-set systems.

    Remote communications (RS232, RS485, Ethernet).

    Provides secure and simple off-site monitoring. All ports are continuously active.

    Direct governor & AVR control.

    Eliminates the requirement for external control equipment.

    kW & kV Ar load sharing.

    Provides controlled power delivery.

    Configurable event log (250).

    Provides access to historical alarms and operational status.

    Integral PLC editor.

    Ensures additional applications are easily integrated into the system.

    Load switching, load shedding & dummy load outputs.

    Allows load options and dummy load requirements to be independently controlled.

    Power monitoring (kW h, kVAr, kV Ah, kV Ar h), reverse power protection, kW overload protection.

    It provides clear accurate power measurement information.

    Data logging (HDD/USB).

    Provides current and historical status information.

    DSE Configuration Suite PC Software.

    Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

    Tier 4 CAN engine support.

    Ensures the control module can be used with the latest in modern electronic engineering technology.
  •
    $140.00
    $140.00
    $0.00
    DSE5120 Module Control Panel for Deep Sea
    Free Shipping
    Interchange part number:DSE5120

    Description:
    Main features
    1.    micro-computer control
    2.automatically activated, the shutdown
    3.real-time display
    4.visualization of the police state of graphics
    5.quick information display unit
    6.LED and LCD alarm instructions
    7.Programmable relay output
    Control Features
    1.    Emergency Parking Control
    2.Automatic Car Plate
    3.StartDelay Control
    4.LocalManually Start / Shutdown
    5.RemoteAutomatic Start / Shutdown
    6.Pre-warm,Pre-controlled oil
    7.Coldmachine, Parking For Electricity
    8.ATSswitch control

    Display Data
    1.    Speed of Generator
    2.Battery Voltage
    3.Oil Pressure of Engine
    4.Water Temperature of Engine
    5.Generating Unit Output Frequency Of Exchange
    6.Operating Time of Generator Set
    7.Load-phase AC current
    8.Exchange phase Voltage

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $80.00
    $80.00
    $0.00
    Electronics Controller Module AMF Unit DSE704 for Deep Sea
    Free Shipping

    Interchange part number:DSE704

    Description:
    Automatic mains (utility) supply monitoring
    Automatic shutdown when fault conditions are detected
    Manual start
    Engine pre-heat
    Engine monitoring and protection features
    Protected Solid State (PSS) outputs
    Front panel mounting
    Front panel programming
    Tamper proof engine hours counter
    Remote start
    LED indicators
    Configurable timers
    Configurable outputs
    Single/three phase mains sensing

    Condition: New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $135.00
    $135.00
    $0.00

    WDPART Deep Sea Controller DSE710 Module
    Free Shipping
    Interchange part number:DSE710

    Condition: New, Replacement

    Description:
    Specific Data：
    1.     Automatic Mains Supply Monitoring              2. Emergency Stop Control
    3. Automatic Control Of Overcrank                    4. Local Manual Start/Stop
    5. Remote Automatic Start/Stop                        6. Start Motor Automatic Exit Control
    7. Preheat Control Of Multiple Modes               8. Parking Power Supply Control
    9. Dual Power Switch Switching Control           10. Start Delay Control

    Product Protection Function:
    1.    Lubricating Oil Pressure Low Protection
    2.Charging Machine Charging Failure
    3.Generator Set Emergency Stop
    4.Generator Set Public Alarm
    5.Generator Overvoltage, Undervoltage, Overload Protection, Cooling Water Temperature High Protection
    6.Engine Overclocking /Low-Frequency Protection
    7.Engine Stop / Start Failure


    Specification:
    1.    ModelDSE710
    2.DC SupplyContinuous Voltage Rating
    3.8 V to 35 V continuous
    4.Maximum Operating Current
    5.180 mA at 12 V; 190 mA at 24 V
    6.Maximum Standby Current
    7.145 mA at 12 V; 150 mA at 24 V
    8.OutputAuxiliary
    9.Solid state
    10.2.4A DC at supply voltage
    11.Fuel/Start
    12.Solid state
    13.3.4 A DC at supply voltage
    14.Generator C.T.
    15.5 A secondary 0.5 VAGenerator Inpu t Range
    16.35 V(L-N) to 333 V AC(L-N) absolute maximum
    17.50 Hz - 60 Hz (min 15 V AC)
  •
    $45.90
    $45.90
    $0.00
    Manual Start Generator Controller DSE701MS for Deep Sea
    Free Shipping
    Application：

    Deep Sea

    Interchange part number:    DSE701MS

    Description:
    Specification:
    1.Condition: 100% Brand New
    2.Item Type: Generator Controller
    3.Material: Plastic
    4.Model: DSE702MS
    5.Mounting Hole Size: Approx. 68 * 68mm / 2.7 * 2.7in

    Package List:
    1 * Generator Controller
    2 * Fixing screw
    2 * Key

    Note:
    1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

    Condition:     New,Replacement

  •
    $45.90
    $45.90
    $0.00
    Manual Key Start DSE501K Controller Electronics Modul
    Free Shipping
    Interchange part number:     DSE501K 

    Description: 
    1.    This product 501K is compatible with DSE501K.
    2.The 501K is a Manual Start Control Module, which has been designed to manually control the engine via a key switch on the front panel. The module is used to start and stop the engine, indicate fault conditions, automatically shut down the engine and show the fault condition by LED.
    3.The module has the ability to monitor the following conditions: Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown and Overspeed. Each alarm channel has its own LED indicator and once activated no further alarm conditions will be accepted
    Feature:
    1.    DC Supply:9 to 33 V Continuous.
    2.Cranking Dropouts:
    3.Able to survive voltage dips during cranking.
    4.This is achieved without the need for internal batteries.
    5.Alternator Input Range:15 - 305 V AC RMS
    6.Alternator Input Frequency:50 - 60 Hz at rated engine speed.
    7.Magnetic Input Range:0.5 V to +/- 80 V
    8.Magnetic Input Frequency: 2300Hz to 6000 Hz at rated engine speed.
    9.Start Relay Output:16 Amp DC at supply voltage.
    10.Run Relay Output:16 Amp DC at supply voltage.
    11.Alarm Output:1 Amp DC at supply voltage.
    12.Dimensions:72 X 72 X 118.5 (Excluding Key-switch)
    13.Operating Temperature Range:-30 to +70 C

    Condition: New
  • $510.00
    $510.00
    $0.00
    Deep Sea DSE4130 Auto Transfer Switch Control Module

    Free Shipping

    Interchange part number: DSE4130

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    The DSE4130 is an Automatic Transfer Switch controller for genset and other applications. The module will monitor the voltage and frequency of the incoming AC mains (utility) supply and in the event of a failure, will issue a start command to the generator control system. This module is now obsolete and can be replaced by the following modules that have similar or improved functionality: Please note the sizes may differ.
    Once the generator is available and producing an output within limits, the DSE4130 will control the transfer device and switch the load from the mains (utility) to the generating set.Once the mains (utility) supply returns to within limits, the module will command a return to the mains (utility) supply and shut down the generator after a suitable cooling run. Various timing sequences are available to prevent nuisance from starting on minor supply breaks. The module can be easily configured via the front panel.


    KEY FEATURES
    Automatic mains supply monitoring
    Load changeover control
    Manual start
    Protected Solid State (PSS) outputs
    Front panel mounting
    Front panel programming
    LED indicators
    Configurable timers
    Single/three-phase mainssensing
    Remote start input
    KEY BENEFITS
    Transfers between mains (utility) and generator power

    On-site module configuration to match user requirements
  •
    $428.00
    $428.00
    $0.00

    Deep Sea DSE6120 Auto Mains Failure Control Module
    Free Shipping
    Alternative part number:DSE6120

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    Support for 0-10 V & 4-20mA oil pressure senders.
    It provides flexibility for use with multiple sensors and engine types.
    Ensures the display continues to operate in extreme cold weather conditions.
    Provides true generator and mains (utility) sensing.
    Generator/load current monitoring & protection.

    Product description
    Specification
    DC Supply: continuous voltage rating 8 V to 35 V Continuous
    Cranking Dropouts: Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recover to 5 V. This is achieved without the need for internal batteries. LEDs and backlights will not be maintained during cranking.
    Maximum Operating Current: 100 mA at 12 V, 105 mA at 24 V
    Maximum Standby Current: 60 mA at 12 V, 55 mA at 24 V
    Maximum Sleep Current:40 mA at 12 V, 35 mA at 24 V
    Generator & Mains(Utility):
    Voltage Range: 15 V to 415 V AC (Ph to N); 26 V to 719 V AC (Ph to Ph)
    Frequency Range: 3.5 Hz to 75 Hz
    Inputs: Digital Inputs A to F, negative switching analog input A
    Configurable as:
    Negative switching digital input
    0 V to 10 V        4 mA to 20 mA        0 | to 240 |
    Analogue Inputs B to D
    Configurable as: Negative switching digital input 0 | to 480 |
    Outputs:
    Output A (Fuel)
    10 A short term, 5 A continuous,
    at supply voltage
    Output B (Start)
    10 A short term, 5 A continuous,
    at supply voltage
    Auxiliary Outputs C, D, E & F
    2 A DC at a supply voltage

    Package List:
    1 x Generator Controller
    2 x Set Screws

  •
    $2,453.00
    $2,453.00
    $0.00
    Deep Sea DSE8660 Auto Transfer Switch Mains Control Module
    Free Shipping
    Interchange part number:DSE8660
    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    The DSE8660 is an easy-to-use single or multi-mains controller with automatic transfer switch capability. Designed to synchronize single or multiple DSE8610s and DSE8680s with single or multiple mains (utility) supplies, the DSE8660 will automatically control the change over from mains (utility) to generator supply or run generators in synchronization with the mains (utility) to provide no-break, peak lopping, and peak shaving power solutions.
    The module can indicate operational status and fault conditions on the LCD screen (multiple languages available), by illuminated LED, audible sounder and SMS messaging. Comprehensive communications are also available via RS232, RS485 & Ethernet for remote PC control and monitoring, and integration into building management systems. The comprehensive event log will record up to 250 events to facilitate maintenance.
    An extensive number of fixed and flexible monitoring and protection features are included. Easy alteration of the sequences, timers, and alarms can be made using the DSE PC Configuration Suite Software. The selected configuration is also available via the module¡¯s front panel. With all communication ports capable of being active at the same time, the DSE8xxx Series is ideal for a wide variety of demanding load share applications.
    KEY LOAD SHARE FEATURES(WITH DSE8x10) :
    1.Peak lopping/shaving                               2.Sequential set start
    3.Manual voltage/frequency adjustment    4.R.O.C.O.F. and vector shift protection
    5.Generator load demand                           6.Automatic hours run balancing
    7.Mains (Utility) de-coupling                       8.Mains (Utility) de-coupling test mode
    9.Bus failure detection                                10.Volts and frequency matching.
    11.kW & kV Ar load sharing
  •
    $169.00
    $169.00
    $0.00
    Deep Sea DSE9130 5 AMP 12V Battery Charger Controller

    Free Shipping

    Interchange part number: DSE9130

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    1.    DSE9130 12 Volt 5 Amp Switch-Mode Battery Charger keeps batteries charged to their maximum capacity at all times
    2.Automatic float mode return. Prevents overcharging battery damage.
    3.Reverse polarity, short-circuit and current limiting protection. Prevents damage to the charger and battery, to provide secure and reliable operation.
    4.Power save mode. Ensures the battery maintains enough power at all times. No moving parts. Ensures longer battery charger life.
    5.Provides an efficient, economical and cool running battery charger

    The DSE9130 12 volt 5 amp Switch-Mode Battery Charger keeps batteries charged to their maximum capacity at all times. It is designed for permanent battery connection and can be DIN rail or chassis mounted. The charger includes a normal or overload condition LED indicator on the front to assist with status identification, operates during cranking and running and accepts multiple AC voltage connections.

    1.12V Intelligent Battery Charger 6A
    2.Operation voltage 12V
    3.Operation Ampere 6A
    4.OVERALL SIZE 136 mm x 140 mm x 63 mm (5.4" x 5.5" x 2.5")
    5.PRODUCT VARIANTS：
    6.9130-00 - 12 volt 5 amp Compact Battery Charger (90v-305v 50/60Hz)
Go to full site