Free Shipping Deep Sea Auto Start Load Share Panel DSE8810
Free Shipping
Interchange part number: 

The DSE8810 is an easy-to-use, load share module, designed to synchronize and work within a load share system of up to 32 generators including electronic and non-electronic engines.

The DSE8810 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder. The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and
flexible monitoring, metering, and protection features are included as well as comprehensive communication and system expansion options.

Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers, and alarms. With all communication ports capable of being active at the same time, the DSE8810 is ideal for a wide variety of demanding load share applications.

KEY LOAD SHARE FEATURES:

1.Sequential set start                                2.R.O.C.O.F. and vector shift 
3.Generator load demand                        4. Automatic hours run balancing
5.Dead bus sensing                                  6.Bus failure detection
7.Direct governor and AVR control          8.Volts and frequency matching 
9.kW and kV Ar load sharing

KEY FEATURES

Comprehensive loadshare capabilities
Configurable inputs (12) 
 Configurable outputs (10) 
 Voltage measurement 
Built-in governor and AVR control
kW overload alarms 
Comprehensive electrical protection
Magnetic pick-up 
Electronic engine capability
RS232, RS485 & Ethernet remote communications
Two RS485 ports
Modbus RTU 
PLC functionality 
Multi event exercise timer
Back-lit LCD graphical display 
Multiple display languages
Automatic start/Manual start
Audible alarm
Reduced file transfer time
Fixed and flexible LED indicators
Event log (250)
Engine protection
Fault condition notification to a designated PC
Protected front panel programming
PC configuration 
Fully configurable
SMS alert messaging
Compatible with DSE8700 & DSE8600 Series

KEY BENEFITS
1.Dual processor for improved response
 2.RS232, RS485 & Ethernet can be used at the same time 
3.High number of inputs and outputs 
4.Worldwide language support 
5. Data logging & trending 
6.Harmonics display for clear monitoring (available soon)
7. Modules can be integrated into building management systems (BMS) 
8.Licence-free PC software 
9.IP65 rating (with supplied gasket) offers increased resistance to water ingress 
10.PLC editor allows user configurable functions to meet specific application 

Specification

DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 600 mA at 12 V, 300 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 CHARGE FAIL/EXCITATION RANGE 0 V to 35 V

OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (CRANK) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E TO L 2 A DC at supply voltage
GENERATOR & BUS VOLTAGE RANGE 15 V to 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz
MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)

BUILT-IN GOVERNOR CONTROL MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated
BUILT-IN AVR CONTROL MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE+/- 10 V DC Fully isolated

DIMENSIONS OVERALL 245 mm x 184 mm x 50 mm 9.6” x 7.2” x 2” PANEL CUTOUT 220 mm x 160 mm 8.7” x 6.3” MAXIMUM PANEL THICKNESS 8 mm 0.3”
STORAGE TEMPERATURE RANGE -40 oC to +85 oC

Environmental Testing Standards

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1 Ab/Ae Cold Test -30 °C BS EN 60068-2-2 Bb/Be Dry Heat +70 °C

VIBRATION

BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn

HUMIDITY

BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 °C @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 °C @ 93% RH 48 Hours

SHOCK

BS EN 60068-2-7 Three shocks in each of three major axes 15 gn in 11 mS

DEGREES OF PROTECTION PROVIDED BY ENCLOSURES

BS EN 60529 IP65 – Front of module when installed into the control panel with the supplied sealing gasket.