wdpart

Kubota Compact Tractor B7410D B7510D B2150D Diesel Engine

Kubota D1105 D905B V1505-B V1305E Diesel Engine

Interchange part number:
16611-63010 16611-63011 16611-63012 18019 228000-0150 228000-1530 228000-1531 9722809-153 

Description: 
12V 1.2KW 9 Teeth Starter Motor

Condition:New,Replacement

For CASE Deutz diesel engine model BF6M1015

alternator

Condition: New,Replacement

For Case IH 684 784 D268 D239 584 D155 384 484 D206 D246 884 D179 995 885 485 395 585 895 595 685 495 385 695 380CK

Interchange part number:
5ND-85540-10-00

Description:
CDI Ignition Module

Condition:New, replacement

Application:
TAL040 B, TAL040 C, TAL040 C1, TAL040 D, TAL040 E, TAL040 F TAL042 A, TAL042 B, TAL042 C, TAL042 D, TAL042 E, TAL042 F, TAL042 G, TAL042 H TAL044 A, TAL044 B, TAL044 C, TAL044 D, TAL044 D1, TAL044 E, TAL044 H, TAL044 J, TAL044 K

Interchange part number: 
R120 AEM230RE005 

Description: 
Automatic Voltage Regulator AVR 

Specification:
Sensing input:
- Voltage: 277 VAC ± 10% for 1-phase,
415 VAC line-to-line ± 10% for 3-phase,
2-line sensing. The AVR senses the true
average of the line-to-line waveform. Use
the resistor (SMD) network for trouble-free
Sensing and control of sensed voltage/regulation.
Input power:
- Voltage: 277 VAC rms ± 10%
- Frequency: 50/60 Hz
Output power:
-Voltage: 95 VDC for 240 VAC Input
-Current:
4 A DC
6 A for 30 sec. (when allowed by the field resistance)
Operating temperature: -20ºC to +70ºC
Storage temperature: -40ºC to +80ºC
Voltage setting: min ± 10% of rated voltage.
Stability setting: can be adjusted to obtain
a correct transient response in a steady state.
Under frequency roll-off setting: available
Below 46 Hz for 50 Hz and below 56 Hz for 60 Hz.
Voltage build-up: 2 Volts (L-N)
Voltage regulation: ± 1% at the AVR
terminals with a THC <5%.
Thermal drift: ± 1% for 30ºC change in temperature.
Response time: less than 50 ms.
Closed loop response: typically 0.5 sec to recover 98% of the defined voltage for a field forcing ratio of 1:2.
Sensing loss protection: the voltage
should disappear when the sensing circuit is open.
Overexcitation protection: 10 VDC to 85 VDC.
Set point: 60 VDC
Protection fuse: 4 A, 240 VAC.
Potentiometer sealing: except for the
V-trim potentiometer, all potentiometers are sealed.
Frequency roll-off indicator: LED provided (UF).
Sensing loss indicator: LED provided (SL).
Overexcitation indicator: LED provided (OE).
Protection on the devices: suitable R-C
snubber to be provided for the device used
to protect against voltage surges.
Potting/Encapsulation details: the
components on the AVR should be
completely encapsulated with suitable PU
resin compound to absorb transients/
vibrations during operation.
Alternator excitation details: (typical)
-Full load:
Excitation voltage: 40 to 50 V
Excitation current: 2.5 to 4.0 A

ENGINE - MACHINE  3116; 3126; 3176C

Interchange part number: 
3E7577 3E-7577 

Description: 
caterpillar

Condition:
New, replacement