Choose Controller at WDPART

157 produkte

What is genset controller?
Genset Controller is used to control the functioning of the genset system. A genset controller provides various monitoring functions of a genset, monitoring of various electrical parameter like voltage, current, frequency, power etc. It also has capability to measure the temperature, oil level/ pressure etc.

How do I know my generator set controller needs replacing?
1. The generator runs slower than usual.
2. The generator makes abnormal noise.
3. The generator output power is low and lower than the normal power.

Why choose Controller at WDPART?
We offer various brands of controllers with high quality. The brands we offered are DeepSea,Smartgen and others. Alternative OEM and original parts available.

Which Controllers does WDPART supply?
WDPART can provide original or aftermarket controllers of deep sea, smartgen, and Cummins brands. Hot sale Controller models: DSE6110, DSE7210, DSE702MS, DSE704, DSE4420, DSE701, DSE7220, DSE7410 MKII, AMF25, AMF20, DSE7420 and so on.

 

  •
    $348.00
    $348.00
    $0.00
    There Generations InteliLite NT AMF 20 Controller for ComAp
    Free Shipping!
    Application:

    Compact gen-set controller for single genset operating in standby mode

    Meets all requirements for Automatic Network Failure (AMF) applications
    Complete control and protection of the gen-set
    Hours of operation event and performance log
    Multiple languages ​​(user changeable) in the controller, even more in the installation set
    Pluggable Extension Module Capacity
    WebSupervisor, AirGate and location support *
    Automatic SMS on alarm or event & gen-set control over SMS
    Fuel theft protection
    Earth fault current protection *
    Switchable configuration alternative
    Supports Maximum Power Applications (MRS)
    Automatic and manual control of GCB and MCB
    Magnetic input pickup
    D + preexcitation terminal
    True RMS measurement value
    Power measurement in 3 phases of the gene and the network included. KWh
    3 configurable analog inputs
    7 binary inputs
    7 binary outputs

    Interchange part number: 
    InteliLite AMF-20 AMF20

    Warranty:1 Year

    Description: 
    inteliLite NT AMF 20 controller for ComAp Gen-Set Auto Mains Failure (AMF) Gen-set Controller

    Condition:New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $289.00
    $289.00
    $0.00
    3rd Generations InteliLite NT AMF 25 Advanced Auto
    Free Shipping!
    Application:
    Compact gen-set controller for single genset operating in standby or prime power modes
    Full gen-set monitoring and protection
    Outstanding EFI engine support with diagnostic messages in plain text via J1939
    Detailed event and performance log with time and date
    Multiple languages (user changeable) in controller, even more in installation suite
    Plug-in and CAN bus extension modules capability
    WebSupervisor and AirGate support*
    Automatic SMS on alarm or event & gen-set control over SMS*
    On-line control and monitoring over web pages (embedded web server) via plug & play IB-Lite
    Optional GSM/GPRS modem/wireless Internet via IL-NT GPRS
    Fuel theft protection and Total fuel consumption monitoring
    Earth fault current protection*
    Alternative switchable configuration
    Dual mutual stand-by (Dual AMF) support
    Supports prime power (MRS) applications
    Automatic and manual GCB and MCB control
    Magnetic pickup input
    D+ preexcitation terminal
    True RMS measurement
    3 phase power measurement of gen-set and mains incl. kWh
    3 configurable analog inputs
    7 binary inputs
    7 binary outputs

    Interchange part number: 
    3rd Generations AMF 25

    Description: 
    3rd Generations InteliLite NT AMF 25

    Condition:New
  • $296.00
    $296.00
    $0.00
    Two Generations InteliLite NT AMF 20 Controller for ComAp
    Free Shipping!
    Application:

    Compact gen-set controller for single genset operating in standby mode

    Meets all requirements for Automatic Network Failure (AMF) applications
    Complete control and protection of the gen-set
    Hours of operation event and performance log
    Multiple languages ​​(user changeable) in the controller, even more in the installation set
    Pluggable Extension Module Capacity
    WebSupervisor, AirGate and location support *
    Automatic SMS on alarm or event & gen-set control over SMS
    Fuel theft protection
    Earth fault current protection *
    Switchable configuration alternative
    Supports Maximum Power Applications (MRS)
    Automatic and manual control of GCB and MCB
    Magnetic input pickup
    D + preexcitation terminal
    True RMS measurement value
    Power measurement in 3 phases of the gene and the network included. KWh
    3 configurable analog inputs
    7 binary inputs
    7 binary outputs
    Interchange part number: 
    InteliLite AMF-20 AMF20

    Description: 
    inteliLite NT AMF 20 controller for ComAp Gen-Set Auto Mains Failure (AMF) Gen-set Controller

    Condition:New
  • $493.00
    $493.00
    $0.00
    WDPART Marine Generator Control Module HEP300
    Marine Generator Control Module HEP300
    Using the powerful Microprocessor, the HEP300 Electronic Potentiometer module integrates digitization, intelligentization and network technology to achieve converting the digital signal or analog signal to the target voltage, current or PWM signal. It is not only used for converting the digital output signal of sync controller or power-split controller to analog signal (±10V voltage, ±20mA current or PWM pulse signal) which can be used by speed governor or AVR, but also can convert the DC voltage signal to DC current signal or PWM signal when transmission distance is large and voltage signal seriously attenuating (with droop PWM signal).
    Free Shipping
  •
    $533.00
    $533.00
    $0.00
    WDPART Marine Generator Control Module HLS300
    Free Shipping
    Marine Generator Control Module HLS300
    HLS300 Power Share Module is a special design for the Genset power share. On the basis of the parameters, the module automatically shares power in Genset running process.
  •
    $349.00
    $349.00
    $0.00
    WDPART Marine Generator Control Module HSM300
    Marine Generator Control Module HSM300
    HSM300 Synchronous Module is a special design for Genset automatic parallel. On the basis of the parameters, the module automatically tests the conditions of paralleling (pressure difference, frequency difference, and phase) and sends a parallel signal when the conditions meet parallel requirements.
    Free Shipping
  •
    $574.00
    $574.00
    $0.00
    WDPART Marine Generator Control Module HMP300
    Marine Generator Control Module HMP300
    HMP300 power Integrated protection module integrates digitization, intelligentization and network technology which are used for collecting generator-set data (voltage, current, power, and frequency) and related action output for data errors to protect the device. It fit with LCD display, optional Chinese and English language interface, and it is reliable and easy to use.
    Free Shipping
  •
    $129.00
    $129.00
    $0.00
    Marine Generator Control Module HVD100 Voltage Protection
    Marine Generator Control Module HVD100 Voltage 
    HVD100 is a voltage protection module of 3 phase 3 wires, when the voltage occurs over-voltage, under-voltage, miss phase, send out a free voltage output.
    PERFORMANCE AND CHARACTERISTICS
    1. Monitor one source 3 phase voltage.
    2. Monitor over voltage, under voltage, miss phase.
    3. The point of over voltage, under voltage is adjustable.
    4. The timer of voltage abnormal delay is adjustable.
    5. The output is a relay free voltage contact.
    6. Module structure design, ABS plastic crust, rail installation, plug connector, convenient maintenance.

    Free Shipping

  •
    $129.00
    $129.00
    $0.00
    Generator Parts Engine Speed Controller Module ESD5131
    Generator Governor Electronic Speed Control Board ESD5131 is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment. If water, mist, or condensation may come in contact with the controller, it should be mounted vertically. This will allow the fluid to drain away from the speed control unit.
    Free Shipping
  •
    $235.00
    $235.00
    $0.00
    Generator Controller Module HAT560N ATS Module
    Engine Generator Controller Module HAT560N Generator Control ATS Module
    HAT560N series ATS controller is intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.
    Free Shipping
  •
    $853.00
    $853.00
    $0.00
    Deep Sea Auto Transfer Switch Control Module DSE333 DSE160

    Free Shipping

    Interchange part number:DSE333 DSE160

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    KEY FEATURES
    1.    Volt-free relays
    2.Supports many topologies
    3.Automatic switch-over between supplies
    4.Check sync feature
    5.Real-time clock
    6.10 configurable inputs
    7.5 configurable outputs
    8.Event log (10)
    9.Configurable timers
    10.Automatic shutdown or warning when fault conditions are detected
    11.PC configuration
    12.Front panel configuration
    13.LED indicators
    14.The back-lit 4-line text LCD display
    15.External mains (utility) or Genset failure inputs
    16.Auto start inhibit
    17.Load inhibit
    18.Manual restore to mains (utility)
    19.Optional current monitoring
    KEY BENEFITS
    1.    Fully automatic monitoring and switch-over control minimizes the effects of power disruptions
    2.The real-time clock provides accurate event information for easy maintenance diagnostics
    3.User-friendly set-up and button layout
    4.Will work with external synchronizer for a seamless return to mains (utility)
  •
    $853.00
    $853.00
    $0.00
    Deep Sea DSE333 Auto Transfer Switch Control Module

    Interchange part number:DSE333

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    KEY FEATURES
    1.    Volt-free relays                                                        2. Supports many topologies
    3. Automatic switch-over between supplies              4. Check sync feature
    5.Real-time clock                                                         5.10 configurable inputs
    6.configurable outputs                                                7.Event log 
    8.Configurable timers  
    9.Automatic shutdown or warning when fault conditions are detected
    10.PC configuration                                                     11.Front panel configuration
    12.LED indicators   13.The back-lit 4-line text LCD display
    14.External mains (utility) or Genset failure inputs      15.Auto start inhibit
    16.Load inhibit       17.Manual restore to mains 
    18.Optional current monitoring

    KEY BENEFITS

    Fully automatic monitoring and switch-over control minimizes the effects of power disruptions
    The real-time clock provides accurate event information for easy maintenance diagnostics
    User-friendly set-up and button layout
    Will work with external synchronizer for a seamless return to mains 

    DC SUPPLY
    CONTINUOUS VOLTAGE RATING
    8 V to 35 V Continuous
    CRANKING DROPOUTS
    Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recover to 5 V. This is achieved without the need for internal batteries. LEDs and backlights will not be maintained during cranking.
    MAXIMUM OPERATING CURRENT
    292 mA at 12 V, 167 mA at 24 V
    MAXIMUM STANDBY CURRENT
    101 mA at 12 V, 66 mA at 24 V
    MAINS (UTILITY)
    VOLTAGE RANGE
    15 V to 333 V AC (L-N)
    FREQUENCY RANGE
    3.5 Hz to 75 Hz
    OUTPUTS
    OUTPUT A (MAINS/UTILITY)
    Normally closed relay output
    8 A AC at 250 V AC
    OUTPUT B (GENERATOR)
    Normally open volt-free output
    8 A at 250 V AC
    OUTPUT C (START)
    Normally closed volt-free output
    8 A DC at 35 V DC (UL Rating 30 V)
    OUTPUT D (CHANGEOVER)
    Normally open volt-free output
    8 A at 250 V AC
    OUTPUT E
    Normally open volt-free output
    8 A at 250 V AC
    GENERATOR
    VOLTAGE RANGE
    15 V to 333 V AC (L-N)
    FREQUENCY RANGE
    3.5 Hz to 75 Hz
    MAGNETIC PICK UP
  •
    $88.00
    $88.00
    $0.00
    Deep Sea DSE720 Auto Mains (Utility) Failure Control Module
    Free Shipping
    Interchange part number:DSE720 
    Description:
    1.    DSE 720 is an Automatic Mains Failure Control Module and automatic shutdown or warning when fault conditions are detected
    2.The module has been designed to monitor generator frequency, volts, current; Engine oil pressure, coolant temperature, speed, running hours and battery volts
    3.Transfer between mains (utility) and generator power
    4.On-site module configuration and remote configuration (Max 100 Meters) using PC software
    5.User-friendly set-up and button layout & Multiple engine parameters are monitored simultaneously


    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    FEATURES:
    1.    PC configurable                               2.Digital and analog inputs
    3.Digital outputs                                 4. Automatic mains (utility) provides monitoring
    5. Automatic shutdown or warning when fault conditions are detected
    6.Manual start                                    7.Engine pre-heat
    8.Engine monitoring and protection features 9.Protected Solid State (PSS) outputs
    10.Front panel mounting                  11.Front panel programming
    12.Tamper-proof engine hours counter   13.Remote start
    14.LED indicators                              15. Configurable timers
    16.Configurable outputs                   17.Configurable inputs
    18.Back-lit character/icon LCD display

    BENEFITS:
    1.    Transfer between mains (utility) and generator power
    2.On-site module configuration and remote configuration (Max 100 Meters) using PC software
    3.User-friendly set-up and button layout
    4.Multiple engine parameters are monitored simultaneously
    5.License-free PC software

  •
    $1,900.00
    $1,900.00
    $0.00

    Deep Sea DSE7510 Auto Start Load Share Control Module

    Free Shipping

    Interchange part number:DSE7510

    Description:
    1.The DSE7510 is an Automatic Engine Control Module, designed to provide advanced load share functionality for diesel and gas generating sets that include electronic and non-electronic engines
    2.The module¡¯s load share functions include automatic synchronizing with a built-in synchroscope and closing onto a dead bus. Direct and flexible outputs from the module are provided to allow connection to the most commonly used speed governors and automatic voltage regulators (AVRs)
    3.A sophisticated module monitoring an extensive number of engine parameters, the DSE7510 will annunciate engine shutdowns, warnings, and engine status information on the back-lit LCD screen, by illuminated LED, on a remote PC, by audible alarm and via SMS text alerts (GSM modem required). The module includes RS232 and RS485 ports as well as dedicated terminals for system expansion

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $3,446.00
    $3,446.00
    $0.00

    Deep Sea DSE7560 Auto Transfer Switch Mains Control Module

    Free Shipping

    Interchange part number:
    DSE7560

    Description:
    Control Module

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    MODULE CAPABILITIES
    Fixed export with mains (utility) supply
    Will synchronize any combination of up to 16 gensets with up to 16 mains (utilities) up to a maximum of 20 in one system e.g. 16 gen-sets + 4 mains, 4 gensets + 16 mains etc

    KEY LOAD SHARE FEATURES
    Fixed export with mains (utility)
    Volts and frequency matching
    kW and kV Ar sharing
    Dead bus sensing
    Peak lopping
    Peak shaving
    No break return
    Load demand scheme
    R.O.C.O.F & Vector Shift
    Mains (utility) de-coupling test facility
    Multiple mains (utility) monitoring
    Synchronizing up to 16 generators
    Sequential start
    Auto-ID negotiation

    KEY FEATURES

    4-Line backlit LCD text display
    Five key menu navigation
    Front panel editing with PIN protection
    Multiple display languages
    LED and LCD alarm indication
    Customizable status screens
    9 configurable inputs
    5 configurable outputs
    Configurable timers and alarms
    Multiple dates and time scheduler
    Event log (25)
    Mains (utility) fail to monitor
    Automatic load transfer between mains (utility) and generator
    Manual load transfer between mains (utility) and generator
    Audible alarm
    Backed-up real-time clock
    Fully configurable via by DSE7500 PC software
    Multiple display languages
    Remote SCADA monitoring and control via DSE7500 PC software
    RS485 communications

    KEY BENEFITS

    132 x 64 Pixel ratio display for clarity
    The real-time clock provides accurate event logging
    Remote monitoring of module using comprehensive DSE7500 PC software
    Ethernet communications (via DSE860/865 modules), provides advanced remote monitoring at low cost
    Modules can be integrated into building management systems (BMS)
    Surplus energy/power can be sold back to the grid (subject to local mains/utility supplier)
    License-free PC software
    IP65 rating (with supplied gasket) offers advanced protection from water ingress

  •
    $335.00
    $335.00
    $0.00

    DSE6020 Auto Mains Failure Control Module

    Free Shipping

    Interchange part number:DSE6020 

    Description:     
    Auto Mains Failure Control Module

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    KEY FEATURES
    1.Large back-lit icon display
    2.Heated display option available
    3.Fully configurable via the fascia or PC using USB communication
    4.Efficient power save mode
    5.phase generator sensing
    6.phase mains (utility) sensing (DSE6020 MKII only)
    7.Generator/load power monitoring (kW, kV A, kV Ar, pf)
    8.Generator overload protection (kW)
    9.Generator/load current monitoring and protection
    10.Breaker control via fascia buttons
    11.Fuel and start outputs, configurable when using CAN
    12.configurable DC outputs
    13.configurable analogue/digital inputs
    14.configurable digital inputs
    15.Support for 0-10 V & 4-20 mA oil pressure sensors
    16.Configurable staged loading outputs
    17.CAN, MPU and alternator speed sensing in one variant
    18.engine maintenance alarms
    19.Engine speed protection
    20.Engine hours counter
    21.Engine pre-heat
    22.Engine run-time scheduler
    23.Engine idle control for starting & stopping
    24.Fuel pump control
    25.Real-time clock
    26.Battery voltage monitoring
    27.Start on low battery voltage
    28.Configurable remote start input
    29.alternative configuration
    30.Comprehensive warning, electrical trip or shutdown protection upon a fault condition
    31.LCD and LED alarm indication
    32.Configurable event log (50)
  •
    $871.00
    $871.00
    $0.00
    WDPART DSE509 Auto Mains Failure control module

    Free Shipping

    Interchange part number:DSE509 

    Condition: New, Original


    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    The configurable Automatic Mains Failure Model 509 allows many of the industry is demanding specifications to be achieved. Variations of the unit offer additional functions such as the RS232 interface for remote monitoring by a volt free relay module, annunciator or building management system.
    The 509 is used to start a generator on a mains (utility) failure and transfer the load when the engine is operating criteria have been met. On the restoration of the mains (utility) supply, the engine is returned to standby mode. The operation of the module is via a four-position rotary switch (key-switch option available) mounted on the front panel with STOP, AUTO, MANUAL (Off-load run) and TEST (on-load run) positions.
    Once activated, the 509 module carries out all the start and stop procedures of the engine, indicating operational status and fault conditions, and automatically shutting down the engine, giving true first up fault condition of the engine failure. The information is displayed on an illuminated Liquid Crystal Display on the front panel. Text and selective operational sequences can be altered using the 801 Calibration Unit. Adjustable parameters are displayed on the screen when the CONFIGURATION mode is activated.
    KEY FEATURES
    1.    Under/over speed shutdown
    2.Under/over frequency shutdown
    3.Low oil pressure shutdown
    4.Adjustable crank cycle/attempts
    5.External remote start input
    6.Magnetic pick-up or alternator speed monitoring
    7.3 digital inputs fully user-configurable
    8.Configurable relay output
    9.LCD backlighting for low light-level operation
  •
    $2,220.00
    $2,220.00
    $0.00
    Free Shipping Deep Sea Auto Start Load Share Panel DSE8810
    Free Shipping
    Interchange part number: 

    DSE8810

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description: 
    The DSE8810 is an easy-to-use, load share module, designed to synchronize and work within a load share system of up to 32 generators including electronic and non-electronic engines.
    The DSE8810 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
    System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder. The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and
    flexible monitoring, metering, and protection features are included as well as comprehensive communication and system expansion options.
    Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers, and alarms. With all communication ports capable of being active at the same time, the DSE8810 is ideal for a wide variety of demanding load share applications.
    KEY LOAD SHARE FEATURES:
    1.Sequential set start                                2.R.O.C.O.F. and vector shift 
    3.Generator load demand                        4. Automatic hours run balancing
    5.Dead bus sensing                                  6.Bus failure detection
    7.Direct governor and AVR control          8.Volts and frequency matching 
    9.kW and kV Ar load sharing
    KEY FEATURES
    Comprehensive loadshare capabilities
    Configurable inputs (12) 
     Configurable outputs (10) 
     Voltage measurement 
    Built-in governor and AVR control
    kW overload alarms 
    Comprehensive electrical protection
    Magnetic pick-up 
    Electronic engine capability
    RS232, RS485 & Ethernet remote communications
    Two RS485 ports
    Modbus RTU 
    PLC functionality 
    Multi event exercise timer
    Back-lit LCD graphical display 
    Multiple display languages
    Automatic start/Manual start
    Audible alarm
    Reduced file transfer time
    Fixed and flexible LED indicators
    Event log (250)
    Engine protection
    Fault condition notification to a designated PC
    Protected front panel programming
    PC configuration 
    Fully configurable
    SMS alert messaging
    Compatible with DSE8700 & DSE8600 Series
    KEY BENEFITS
    1.Dual processor for improved response
     2.RS232, RS485 & Ethernet can be used at the same time 
    3.High number of inputs and outputs 
    4.Worldwide language support 
    5. Data logging & trending 
    6.Harmonics display for clear monitoring (available soon)
    7. Modules can be integrated into building management systems (BMS) 
    8.Licence-free PC software 
    9.IP65 rating (with supplied gasket) offers increased resistance to water ingress 
    10.PLC editor allows user configurable functions to meet specific application 
    Specification
    DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 600 mA at 12 V, 300 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 CHARGE FAIL/EXCITATION RANGE 0 V to 35 V
    OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (CRANK) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E TO L 2 A DC at supply voltage
    GENERATOR & BUS VOLTAGE RANGE 15 V to 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz
    MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)
    BUILT-IN GOVERNOR CONTROL MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated
    BUILT-IN AVR CONTROL MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE+/- 10 V DC Fully isolated
    DIMENSIONS OVERALL 245 mm x 184 mm x 50 mm 9.6” x 7.2” x 2” PANEL CUTOUT 220 mm x 160 mm 8.7” x 6.3” MAXIMUM PANEL THICKNESS 8 mm 0.3”
    STORAGE TEMPERATURE RANGE -40 oC to +85 oC
    Environmental Testing Standards
    ELECTRO-MAGNETIC COMPATIBILITY
    BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment
    ELECTRICAL SAFETY
    BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment
    TEMPERATURE
    BS EN 60068-2-1 Ab/Ae Cold Test -30 °C BS EN 60068-2-2 Bb/Be Dry Heat +70 °C
    VIBRATION
    BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn
    HUMIDITY
    BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 °C @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 °C @ 93% RH 48 Hours
    SHOCK
    BS EN 60068-2-7 Three shocks in each of three major axes 15 gn in 11 mS
    DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
    BS EN 60529 IP65 – Front of module when installed into the control panel with the supplied sealing gasket.
  •
    $2,027.00
    $2,027.00
    $0.00

    DSE8620 Synchronising Load Sharing Auto Control Module

    Free Shipping

    Interchange part number: DSE8620 

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description: 
    1.Deep Sea Electronics DSE8620 Synchronising & Load Sharing Auto Mains Utility Failure Control Module
    2.The DSE8620 is an intelligent mono display auto mains (utility) failure load share control module packed with industry-leading features to enhance paralleling single gensets with a mains (utility) supply.
    3.The DSE 8620 automatically controls the change over between mains (utility) and generator power and can also be configured to run a generator in synchronization with a mains (utility) supply.
    OVERALL SIZE:240 mm x 181 mm x 42 mm

    PANEL CUTOUT SIZE:220 mm x 160 mm 
    MAXIMUM PANEL THICKNESS:8.0 mm 
    Key Features and Benefits:
    Mains failure detection, mains  power monitoring (kW, kV Ar, kV A & pf) monitoring, mains decoupling protection, mains  kW export protection.
    Gives full mains  back-up and provides no break synchronisation that includes peak lopping and peak shaving options with mains power monitoring.
    Configurable inputs/outputs (11/8).
    Provides multiple installation options.
    Dead bus sensing.
    Provides rapid power delivery on multi-set systems.
    Direct governor & AVR control.
    Eliminates the requirement for external control equipment.
    Provides controlled power delivery.
    Remote communications (RS232, RS485 x2, Ethernet).
    Provides secure and simple off site monitoring. All ports are continuously active.
    Configurable event log (250).
    Provides access to historical alarms and operational status.
    Integral PLC editor.
    Ensures additional applications are easily integrated into the system.
    Load switching, load shedding & dummy load outputs.
    Allows load options and dummy load requirements to be independently controlled.
    Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.
    Provides clear accurate power measurement information.
    Data logging (HDD/USB).
    Provides current and historical status information.
    DSE Configuration Suite PC Software.
    Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
    Tier 4 CAN engine support.
    Ensures the control module can be used with the latest in modern electronic engine technology.
  •
    $800.00
    $800.00
    $0.00
    DSE7420 Auto Mains (Utility) Failure Control Modules

    Free Shipping
    Interchange part number:DSE7420

    Description:    Auto Mains (Utility) Failure Control Modules

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.


    1.The DSE7420 MKII is an intelligent, powerful auto mains (utility) failure control module with high-level features and functionality.
    2.SNMP GET, SET & TRAP support built-in. Removes the requirement for additional devices
    3.CAN, MPU & alternator speed sensing (selectable depending on engine type).
    4.Configurable digital inputs (8). Provides multiple installation options. Configurable analogue / digital inputs 
    5.Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.
Go to full site