wdpart

SmartGen HGM9320MPU Genset Controller Generator Controller
Application:
SmartGen 

Interchange part number: 
HGM9320MPU 

Description: 
Genset Controller Generator Controller Module 

Condition:
New

Controller HGM9320CAN for SmartGen Module

Application:
SmartGen Module

Interchange part number: 
HGM9320CAN 

Description: 
Controller 

Condition:New,Original

HAT160 Automatic transfer switch controller (ATS) 230/400VAC
SmartGen HAT160 Automatic Transfer Switch Controller 

HAT160 ATS Controller is suitable for CB ATS of a single motor. It can accurately detect 2-way-3-phase 4-wire/single-phase 2-wire voltage and judge voltage abnormal (such as over-voltage, under-voltage, over frequency, under frequency and lack of phase), then control ATS after a delay. When ATS switches abnormally, the controller can detect close/open failure and alarm on the front panel to ensure the correct action of ATS. After abnormal of I# power, the controller will send a signal to start the Genset. The controller has remote communication, remote control, and parameter configuration functions via LINK port communication.

Free Shipping!
Application:
SmartGen

Interchange part number:
HAT160

Description:
Automatic Transfer Switch Controller

Condition:New,Original

SMARTGEN HAT310 120VAC ATS Controller 120/240VAC 50-60Hz

HAT310-120V ATS Controller is suitable for 2-stage of PC, and ATS of CC class (close signal is constant output).

It can accurately detect 3-phase 4-wire mains voltage and generator single-phase voltage.

When the mains under-voltage and loss of phase occurred, HAT310-120V will control ATS transfer after a delay. If the mains are unavailable, the controller has the function to initiate signals to start the gen-set.

Free Shipping!
Application:
SmartGen

Interchange part number:
HAT310 120VAC

Description:
Controller

Condition:New,Original
PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

SmartGen HAT520N ATS controller

The powerful Microprocessor contained within the HAT520N ATS controller allows for precision voltage (2-way 3-phase/single phase) measuring and make accurate judgment on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, phase sequence wrong) and control ATS to transfer after the delay has expired. This controller is suitable for NO Breaking ATS. When 1# power is abnormal, the controller will send a signal to start Genset after the “1# abnormal delay” has expired. “Three remote” (remote control, remote measurement, and remote communication) function can be implemented with the help of the LINK communication port.

Free Shipping!
Application:
SmartGen

Interchange part number:
HAT520N

Description:
ATS Controller

Condition:New,Original
PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

SmartGen HAT530N ATS Controller for NO Breaking ATS 

The powerful Microprocessor contained within the HAT530N ATS controller allows for precision voltage (2-way 3-phase/single phase) measuring and make accurate judgment on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, phase sequence wrong) and control ATS to transfer after the delay has expired. This controller is suitable for NO Breaking ATS and ONE Breaking ATS.

Free Shipping!
Application:
SmartGen

Interchange part number:
HAT530N

Description:
ATS Controller

Condition:New,Original
PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

Generator Controller Module HAT560N ATS Module
Engine Generator Controller Module HAT560N Generator Control ATS Module

HAT560N series ATS controller is intelligent dual-supply module with configurable function, automatic measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.

SmartGen HAT560NBC ATS controller PC Two-stage PC

Free Shipping!
Application:
SmartGen

Interchange part number:
HAT560NBC

Description:
ATS Controller

Condition:New,Original
PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

1. System type can set as: Mains (1#) & Generator (2#), Generator (1#) & Mains (2#), Mains (1#) & Mains (2#), Generator (1#) & Generator (2#).
2. 132x64 LCD with backlight, optional Chinese and English display, push-button operation.
3. Measure and display 2-way 3 phase Voltage and Frequency:
4. Over/under voltage, loss of phase, reverse phase sequence, over/under frequency protection.
5. Automatic/Manual mode. In manual mode, can force the switch to close or open;
6. All parameters can be set on site. Two different passwords which ensure authorized staff operation only.
7. During commissioning, the genset can be set either on On-load or Off-load mode.
8. ATS Controller has the function of automatic Re-closing.
9. The closing output signal can be set as on intervals or as continuous output.
10. Applicable for ATS of one neutral position, two neutral positions and non-position.
11. Applicable for 2 isolated neutral lines.
12. Real-time clock (RTC).
13. The event log can record 50 items circularly.
14. Scheduled start & stop generator (can be set as start genset once a day/week/month whether with load or not).
15. Can control two generators to work in a cycle, even the genset running time and crank rest time can be set.
16. Optional AC system or DC system.
17. With standard LINK communication interface. With "remote controlling, remote measuring, remote communication" function by the Modbus communication protocol. Can remote start/stop the genset and remote control the ATS to close or open?
18. With RS485 isolated communication interface. With "remote controlling, remote measuring, remote communication" function by the ModBus communication protocol; or remote measuring the status of incoming cabinet and remote controlling the ATS to close/open by the front-end intelligent device (YD/T 1363.3－2005) protocol.
19. Can check the current status of the controller (digital input port, a digital output port, over-voltage, under-voltage, over frequency, under frequency, etc.).
20. Suitable for various AC systems (3 phase 4-wires, 3-phase 3-wires, single-phase 2-wire, and 2-phase 3-wire).
22. Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting，compact structure with easy installation.

Engine Generator Controller Module HAT600N ATS Module
Engine Generator Controller Module HAT600N Generator Control ATS Module

HAT600N series ATS controller is intelligent dual-supply module with programmable function, automatic measurement, LCD display, and digital communication. It combines digital intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.

Free Shipping!
Application:
SmartGen Generator

Interchange part number:
HAT600N

Description:
Engine Generator Controller Module

Condition:New,Original

Engine Controller Module HAT600NI for SmartGen ATS Module
Engine Generator Controller Module HAT600NI Generator Control ATS Module

HAT600N series ATS controller is an intelligent dual-supply module with programmable function, automatic measurement, LCD display, and digital communication. It combines digital intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.

Free Shipping!
Application:
SmartGen ATS Module

Interchange part number:
HAT600NI

Description:
Engine Controller Module

Condition:New,Original
PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.