wdpart

Free Shipping
Application:
For FG Wilson

Interchange part number:
10000-61859,1000061859

Description:
Automatic Voltage Regulator AVR

Condition:New, replacement

Specification:
Regulation Accuracy:+/- 0.5% Rated Steady State Conditions
Voltage Drift:+/- 0.5% Voltage Change, for 50ì C
Response Time:1 Cycle
Operating Temperature:-30ì C- +70ì C
Exciter Field Resistance:8ヘ Min- 20ヘ Max
Input/Output Data:
Supply Voltage:170~270v
Power Supply:350 Va (Max)
Power Dissipated:15w ( Max )
Voltage Sensing:170~270v
Output Voltage ( DC ) 30v
Output Current ( DC ) 5a (Max, Continuos )
Output Current ( DC ) 8a (Max Forcing One Minute)

Free Shipping
Application:
Denyo Diesel Genset
Purpose:TLG-18SPY, DCA-13ESK, 15ESK

Interchange part number:
AN-5-203,AN5203

Description:
Automatic Voltage Regulator

Condition:New, replacement

Free Shipping
Application:
For operating at 60Hz, connect regulator terminals 6 and 7 with a bridge

Specification:
- Supply voltage inlet:
a) 110Vac ±15%,
b) 220Vac -25%/+15%
- Maximum field current: 10 Adc
- Permanent field current: 7 Adc
- Single phase reference voltage inlet: 90Vac ÷ 440Vac
- Outlet voltage setting of the alternator with multi-round trimmer
- Stability control setting with multi-round trimmer
- Intervention level setting of low frequency protection with multi-round trimmer
- Intervention level setting of over-exciting protection with multi-round trimmer
- Remote potentiometer inlet
- Possible operation at 50Hz or 60Hz
- Possible operation of alternators in parallel

Interchange part number:
HVR-11 HVR11 7050432

Description:
Automatic Voltage Regulator 

Condition:
New, replacement

Free Shipping
Application:
The voltage regulator type “MARK V”, is suitable for Synchronous Generators of MARELLI MOTORI make, MJB series, size range 160-225 frames. The regulator is fully insulated in order to maintain high reliability also with severe ambient conditions (high level of humidity, dust, salt atmosphere), and in case of high vibrations level. The regulator is proper both for single and 3-phase generators.

Specification:
Regulation Accuracy:+/- 0.5% Rated Steady State Conditions
Voltage Drift:+/- 0.5% Voltage Change, for 50ì C
Response Time:1 Cycle
Operating Temperature:-30ì C- +70ì C
Exciter Field Resistance:8ヘ Min- 20ヘ Max
Input/Output Data:
Supply Voltage:170~270v
Power Supply:350 Va (Max)
Power Dissipated:15w ( Max )
Voltage Sensing:170~270v
Output Voltage ( DC ) 30v
Output Current ( DC ) 5a (Max, Continuos )
Output Current ( DC ) 8a (Max Forcing One Minute)

Interchange part number:
M16FA655A

Description:
Automatic Voltage Regulator

Condition:
New, replacement

Application:

Sensing/Power input	Voltage	220/400VAC,1phase 2wire
	Frequency	50/60 Hz jumper selectable
Output	Voltage	Max.90VDC@240VAC input
	Current	Continuous 6A Intermittent 75A for 10secon

Interchange part number:  
GAVR -75A 

Description: 
AVR Automatic Voltage Regulator

Condition:
New, replacement

Application:
Interchange part number: 
GAVR-50A GAVR50A

Description: 
AVR Automatic Voltage Regulator

Condition:
New, replacement

Free Shipping
Application:
Features:
- <±0.5% Regulation
- 220/400 VAC Programmable Input
- Rugged Compact Design
- With Under Frequency Protection
- Soft Start Voltage Ramping
- EMI Suppression
- Built-in High Capacity 15Amp Fuse
 
Specification:
Sensing Input Voltage: 220/400VAC, 1 phase 2 Wire
Power Input Voltage: 180~240V, 1 phase 2 Wire
Output Voltage: Max 90V dc @240V ac input
Current: Continuous 6A
Intermittent 12A for 10 secs
Resistance: Min.10 ohms Max.100 ohms
Volts Regulation: <±0.5% (with 4% engine governing)
Voltage Build-up: Residualvolts at AVR teminal>5VAC
Soft Start Ramp Time: 3 seconds
External Voltage Adjustment: ±7% with 1 k ohm 1-watt trimmer
Unit Power Dissipation: 8 watts maximum thermal.
Drift: 0.05% per °C change in AVR ambient
Under Frequency: 60Hz system presets knee point at 57Hz
(Factory Settings) 50Hz system presets knee point at 47Hz
Operating Temperature: -40°C to 65°C
Storage Temperature: -40°C to 85°C
Relative Humidity: <95%

Interchange part number:
GAVR-20A,GAVR20A

Description:
AVR Automatic Voltage Regulator

Condition:
New, replacement

Free Shipping
Application:
< 0.5% Regulation
220/400 V AC Programmable Input
Rugged Compact Design
With Under Frequency Protection
Soft Start Voltage Ramping
EMI Suppression
Built-in High Capacity 15AMP Fuse

Interchange part number:
GAVR-15B GAVR15B

Description:
AVR Automatic Voltage Regulator

Condition:New, replacement

Free Shipping
Application:
Voltage Set-up:The voltage set up when the remnant magnetism greater than 4V25Hz
Input power Supply:AC 160~260V 50/60Hz
Maximum Output:DC 15A 90V(when the voltage reaches AC 207V)
Frequency  Compensation: Built-in low speed protective circuit.
Regulation factor:Less then 1%

Interchange part number:
GAVR-15A


Description:
AVR Automatic Voltage Regulator

Condition:
New, replacement

Free Shipping

Application:
3 Phase Diesel Generator Set

Interchange part number:
GAVR-12B

Description:
AVR Automatic Voltage Regulator

Condition:
New, replacement

Free Shipping
Application:
brushless generator, is suitable for both 50HZ and 60HZ
Voltage Set-up:The voltage set up when the remnant magnetism greater than 4V 25Hz
Input power Supply:AC 160~260V 50/60Hz
Maximum Output:DC 5A 95V(when the voltage reaches AC 240V)
Frequency  Compensation:Built-in low speed protective circuit.
Reglation factor:<1

Interchange part number:
GAVR-12A

Description:
AVR Automatic Voltage Regulator

Condition:New, replacement

Free Shipping

Specifications:
Input :
Sensing Voltage : 220/400VAC,1phase 2wire
Power Voltage : 180~240VAC, 1phase 2wire
Voltage Jumper selectable : 95-132V ac or 190-264 Hz nominal
Frequency : 50-60 Hz nominal
Output :
Voltage max : 90V dc at 207V ac input
Current continuous : 2A dc
Current intermittent : 5A for 10 secs
Resistance : 20 ohms minimum
Voltage Build-up : esidualvolts at AVR terminal>5VAC
External volts adjustment : +/-7%with 1KΩ 1watt trimmer
Unit Power Dissipation : Max.8Watt
Under Frequency Protection : 60Hz system presets knee point at 57Hz
Factory Settings : 50Hz system presets knee point at 47Hz
Body size : 10.7*8.2*125px

Interchange part number:
GAVR-10A

Description:
AVR Automatic Voltage Regulator

Following are the main features of General Generator AVR GAVR-10A:
1. Automatic Voltage Regulator,Brushless AVR
2. MAX.Output Current:10A for 10 Second
3. Loading Impedance: 15~100OHM
4. Temperature Stability: <0.02%/PER Celsius Changed
5. Under Frequency protection point: 45HZ for 50Hz apply (55Hz for 60Hz supply)

Condition:
New, replacement

Free Shipping
Application:
Input voltage:Jumper selectable 190-264V ac
Frequency:50-60 Hz nominal
Output voltage:max 90V dc at 207V ac
Input current:continuous 2A dc,Intermittent 5A for 10 secs
Regulation:+/- 1%

Interchange part number: 
GAVR-8A 

Description: 
AVR Generator Automatic Voltage Regulator Module

Condition:New, replacement

Free Shipping!
Application:
Grameyer Generator

Interchange part number:
GTR7-TH4E

Description:
AVR Automatic Voltage Regulator

Condition:New,Original
PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

Free Shipping!
Application:
1FC4 & 1FC5 Series Siemens Generator 

Interchange part number:
6GA2-490-0A , 6GA2490-0A , 6GA24900A , 6GA2 490 0A

Description: 
Automatic Voltage Regulator avr

Condition:OEM

Free Shipping!
Application:
1FC6 Series Siemens Generator

Interchange part number:
6GA2-491-1A 6GA2491-1A P0808-210 491-1A 4911A A-541432 A541432

Description:
Generator Automatic Voltage AVR

Condition:OEM

Application:
TAL040 B, TAL040 C, TAL040 C1, TAL040 D, TAL040 E, TAL040 F TAL042 A, TAL042 B, TAL042 C, TAL042 D, TAL042 E, TAL042 F, TAL042 G, TAL042 H TAL044 A, TAL044 B, TAL044 C, TAL044 D, TAL044 D1, TAL044 E, TAL044 H, TAL044 J, TAL044 K

Interchange part number: 
R120 AEM230RE005 

Description: 
Automatic Voltage Regulator AVR 

Specification:
Sensing input:
- Voltage: 277 VAC ± 10% for 1-phase,
415 VAC line-to-line ± 10% for 3-phase,
2-line sensing. The AVR senses the true
average of the line-to-line waveform. Use
the resistor (SMD) network for trouble-free
Sensing and control of sensed voltage/regulation.
Input power:
- Voltage: 277 VAC rms ± 10%
- Frequency: 50/60 Hz
Output power:
-Voltage: 95 VDC for 240 VAC Input
-Current:
4 A DC
6 A for 30 sec. (when allowed by the field resistance)
Operating temperature: -20ºC to +70ºC
Storage temperature: -40ºC to +80ºC
Voltage setting: min ± 10% of rated voltage.
Stability setting: can be adjusted to obtain
a correct transient response in a steady state.
Under frequency roll-off setting: available
Below 46 Hz for 50 Hz and below 56 Hz for 60 Hz.
Voltage build-up: 2 Volts (L-N)
Voltage regulation: ± 1% at the AVR
terminals with a THC <5%.
Thermal drift: ± 1% for 30ºC change in temperature.
Response time: less than 50 ms.
Closed loop response: typically 0.5 sec to recover 98% of the defined voltage for a field forcing ratio of 1:2.
Sensing loss protection: the voltage
should disappear when the sensing circuit is open.
Overexcitation protection: 10 VDC to 85 VDC.
Set point: 60 VDC
Protection fuse: 4 A, 240 VAC.
Potentiometer sealing: except for the
V-trim potentiometer, all potentiometers are sealed.
Frequency roll-off indicator: LED provided (UF).
Sensing loss indicator: LED provided (SL).
Overexcitation indicator: LED provided (OE).
Protection on the devices: suitable R-C
snubber to be provided for the device used
to protect against voltage surges.
Potting/Encapsulation details: the
components on the AVR should be
completely encapsulated with suitable PU
resin compound to absorb transients/
vibrations during operation.
Alternator excitation details: (typical)
-Full load:
Excitation voltage: 40 to 50 V
Excitation current: 2.5 to 4.0 A

Automatic Voltage Regulator AVR R731 for Leroy somer
Free Shipping

Application:
Leroy somer

Interchange part number: 
R731 

Description: 
Automatic Voltage Regulator

Condition:New, replacement