Choose DeepSea Controller at WDPART.

39 des produits

What is a deep sea controller?
Deep Sea Electronics is one of the world's top manufacturers of generator controllers and automatic transfer switch controllers.

What does a generator controller do?
The controller system monitors the operation of the engine and generator functions. Typical safety items include low oil pressure, high temperature, excessive engine starting, frequency (speed) too high/low, low coolant level, etc.

DeepSea controller
DSE is a range of intelligent single and multi-generator control solutions, power (utility) protection relays, light tower control solutions, digital automatic voltage regulators (AVR), remote communication equipment and expansion modules. Each range is designed and manufactured by industry-leading experts to deliver a range of features and benefits that set new standards across the industry.

View our online product guides and contact us at info@wdpart.com for quotes and details.

What are the symptoms of a damaged electronic control module?
Malfunction Indicator Lamp (MIL) lighting.
Poor performance.
Difficulty starting and/or stalling.
Emissions increase.
Fuel economy is poor.

Which DeepSea controller can WDPART supply?
WDPART can supply include DSE6110 DSE7210 DSE702MS DSE103 DSE4420 DSE701 DSE335 DSE8610 DSE5120 DSE710 DSE701MS DSE5110 DSE333 DSE3110 DSE6120 DSE7510 DSE8660 DSE9130 DSE9255 DSE6020 DSE509 DSE8810 DSE7420 DSE2157 DSE7310 DSE5220 and so on.

 

  •
    $54.00
    $54.00
    $0.00
    Generator Controller DSE702MS Manual Start Generator Controller for Deep Sea
    Free Shipping
    Interchange part number:DSE702MS
    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Features:
    1. Microcomputer control also can manually start and stop.
    2. LED indicating fault information, which is convenient to use.
    3. Compact size, lightweight, practical and easy to use.
    4. Solid structure, low noise, stable working performance.
    5. Using high-quality glass resistor, working temperature: -55°C ~ 350°C.
    6. High-quality potentiometer, smooth adjustment, not easy to damage, 100% imported original IC.
    7. High precision of resistance, wide operating temperature, small drift, and good stability.
    8. High-quality capacitors, good parameter consistency, and high reliability.

    Specification:
    Condition: 100% Brand New
    Item Type: Generator Controller
    Material: Plastic
    Model: DSE702MS
    Mounting Hole Size: Approx. 68 * 68mm / 2.7 * 2.7in

    Package List:
    1 * Generator Controller
    2 * Fixing screw
    2 * Key

    Note:
    1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
  • $275.80
    $275.80
    $0.00
    WDPART Control Module DSE6110 for Deep Sea Generator
    Free Shipping
    Interchange part number:
    DSE6110

    Description:
    The DSE6110 is an Auto Start Control Module suitable for a wide variety of single gen-set applications.

    Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature, and fuel level, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.

    Condition: New,Replacement

    Features
    The back-lit text LCD display
    Front panel editing
    LED and LCD alarm indication
    Power Save mode
    CAN and Magnetic Pick-up/Alt. versions available (specify on ordering)
    PC and front panel configuration
    6 Digital inputs
    3 Analog inputs
    6 Outputs (4 configurable on Magnetic Pick-up/Alt., 6 configurable on CAN version)
    Configurable timers and alarms
    Alternative configuration
    Event Log (10)
    Remote Start input
    3 Phase generator monitoring
    Current Monitoring and protection
    Battery voltage monitoring
    Engine pre-heat
    Hours counter
    Comprehensive shutdown or warning on fault condition

    Specification
    Operating Voltage DC8.0V to DC35.0V, Continuous Power Supply.
    Alternator Input Range 15V - 360 V AC (ph-N)
    3-Phase4-Wire 26V - 620 V AC (ph-ph)
    3-Phase3-Wire 15V - 360 V AC (ph-N)
    Single-phase2-wire 15V - 360 V AC (ph-N)
    2-Phase3-Wire:
    Alternator Frequency 50/60Hz
    Speed Sensor voltage VPP 2.2 - 100Vpp (Peak to peak)
    Speed Sensor Frequency 10000Hz (max)
    Start Relay Output 16Amp Controller Power Voltage Output
    Fuel Relay Output 16Amp Controller Power Voltage Output
    Programmable Relay Output 1 7Amp 250VAC Voltage Free Output
    Programmable Relay Output 2 7Amp 250VAC Voltage Free Output
    Programmable Relay Output 3 16Amp 250VAC Voltage Free Output
    Programmable Relay Output 4 16Amp 250VAC Voltage Free Output
    Case Dimension 210mm x 152 mm x 48 mm
    Panel Cutout 186mm x 141mm
    C.T. Secondary 5A Rated
    Protection Level IP55:When waterproof rubber seal installed between the controller and panel fascia.
    IP42: When a waterproof rubber seal is not installed between the controller and the panel fascia.
    Insulating Intensity Object: input/output/power
    Quote standard: IEC688-1992
    Test way: AC1.5kV/1min leakage current:3mA

  •
    $289.00
    $289.00
    $0.00
    DSE7210 Electronic Control Module Panel For Deepsea
    Free Shipping
    Interchange part number:DSE7210

    Description:
    1.    Large back-lit text LCD display.
    2.CAN and magnetic pick-up sensing.
    3.3-phase generator sensing.
    4.Configurable inputs/outputs (6/8).
    5.Power monitoring (kW h, kV Ar, kV Ah, kV Ar h)

    Specification:
    Material: Plastic
    Model: DSE7210
    Output:
    Power supply voltage output A (fuel) : 15 A DC
    Power supply voltage output B (start) : 15 A DC
    Output C&D: 8 A 250 V (no voltage)
    Auxiliary output under the power supply voltage: E, F, G, H 2 A direct current
    Generator:
    Voltage range: 15 V-333 V AC (L-N)
    Frequency range: 3.5 Hz to 75 Hz
    Magnetic pickup:
    Voltage range: +/- 0.5V to 70V
    Frequency range: 10000 Hz (maximum)

    Package List:
    1 x Generator Controller    1 x Black Gasket        4 x Set Screws

    Condition: 
    New
  •
    $369.00
    $369.00
    $0.00
    Deep Sea DSE4420 Auto Mains Failure Control Module
    Free Shipping
    Application： MPU Controller Deep Sea

    Interchange part number:    DSE4420

    Description:
    The DSE Configuration Suite Software Installer should be installed to your laptop/PC hard drive. Once installed the software will be ready for use immediately. To begin configuring your module type, start by selecting the module you are using. Configurations can then be created and saved for future use. 

    OVERALL SIZE：180 mm x 116 mm x 42 mm (7.1” x 4.6” x 1.7”) 
    PANEL CUTOUT SIZE：154 mm x 98 mm (6.0" x 3.9")

    MAXIMUM PANEL THICKNESS：8.0 mm (0.3”)

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $298.00
    $298.00
    $0.00
    WDPART Deep Sea DSE7310 Auto Start Control Module
    Free Shipping

    Interchange part number: DSE7310

    Condition: Original New

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    1.    The DSE7310 Generator Controller is a feature-packed Auto Start Control Module designed to control single diesel or gas gen-set applications.
    2.Configurable inputs/outputs (9/8), Fuel usage monitor and low-level alarms.
    3.Flexible sender inputs, allows load options and dummy load requirements to be independently controlled.
    4.Power monitoring (kW h, kV Ar, kV Ah, kV Ar h) 3-phase generator sensing.
    5.Remote communications (RS232 & RS485), Configurable display languages, Power save mode.

    Introduction
    The DSE7310 is a Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and SMS text alerts (with external modem).
    Features
    4-Line backlit LCD text display
    Five key menu navigation
    Front panel editing with PIN protection (Front panel programming)
    LED and LCD alarm indication
    Customizable status screens
    Power save mode
    6 configurable inputs (Configurable inputs and outputs)
    8 configurable outputs
    Configurable timers and alarms
    3 configurable maintenance alarms
    Multiple dates and time scheduler
    Configurable event log (100)
    Control logic facilities
    Easy access diagnostic page (Strong diagnostic function)
    CAN and Magnetic Pick-up/Alt. sensing
    Fuel usage monitor and low fuel alarms
    Charge alternator failure alarm
    Manual speed control (on compatible CAN engines)
    Manual fuel pump control
    Engine exerciser
    Protections disabled feature
    KW Overload protection
    Power monitoring (kW h, kV Ar, kV A h, kV Ar h)
    Load switching (load shedding and dummy load outputs)
    True dual mutual standby with load balancing timer
    USB connectivity
    Backed-up real-time clock
    Fully configurable via DSE Configuration Suite PC software
    Configurable display languages
    Remote SCADA monitoring via DSE Configuration Suite PC software
  •
    $89.00
    $89.00
    $0.00
    Generator Controller Module DSE704 for Deep Sea
    Free Shipping
    Interchange part number:DSE704

    Condition: New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Feature:
    The products are made of high quality electronic components, and the performance is stable and reliable. Suitable for diesel generator equipment. DC power supply: 8-35V continuous. It can maintain stable performance and reliability in harsh environments. With strict electromagnetic testing, the product is of high quality. 

    Specification:
    Model: DSE704
    DC power supply: 8-35V continuous
    Maximum current: 50mA working,  10mA standby
    Electric ball input range: 75 (middle line) to 277 (middle line) 3-phase 4-wire exchange (+20%)
    Electric ball input frequency: 50-60Hz at rated engine speed (minimum: 75V AC neutral line) (starting off from 15V center line)
    Start output: 1.2A DC supply voltage

    Package list:
    1 * Generator Module Control Panel

  •
    $331.00
    $331.00
    $0.00
    WDPART Deep Sea DSE3110 CAN Control Module
    Free Shipping
    Interchange part number:DSE3110

    Description:

    The DSE3110 is an outstanding compact control module that provides a comprehensive range of features for single-set applications. The controller can be used in manual or auto start mode.

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    OVERALL SIZE
    98 mm x 79 mm x 40 mm (3.9¡± x 3.1¡± x 1.6¡±)

    PANEL CUTOUT SIZE
    80 mm x 68 mm (3.1 " x 2.7")

    MAXIMUM PANEL THICKNESS
    8.0 mm (0.3)

    CONTINUOUS VOLTAGE RATING
    8 V to 35 V Continuous
    CRANKING DROPOUTS
    Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
    CHARGE FAIL/ EXCITATION
    8 V to 35 V fixed power source 2.5 W
    NOMINAL STANDBY CURRENT
    23 mA at 12 V, 18 mA at 24 V
    MAXIMUM OPERATING CURRENT
    35 mA at 12 V, 30 mA at 24 V
    OUTPUTS
    OUTPUT A (FUEL)
    2 A DC at a supply voltage

    OUTPUT B (START)
    2 A DC at a supply voltage

    AUXILIARY OUTPUTS C & D
    2 A DC at supply voltage
    GENERATOR
    VOLTAGE RANGE
    15 V - 333 V AC (L-N)

    FREQUENCY RANGE
    3.5 Hz to 75 Hz
    MAGNETIC PICK-UP
    VOLTAGE RANGE
    +/- 0.5 V to 70 V

    FREQUENCY RANGE
    10,000 Hz (max)
  •
    $69.90
    $69.90
    $0.00
    Deep Sea DSE701 Manual Auto Start Control Module
    Free Shipping

    Interchange part number: DSE701

    Condition: Replacement New


    Description:
    The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
    Additionally, the Autostart versions (701AS) of the controller will respond to a remote switched input to begin the start sequence.
    Power Supply: DC 8 to 35 V Continuous & Cranking Dropouts: Able to survive voltage dips during cranking. Without the need for internal batteries.
    Alternator Input Range :15-305V AC RMS (+20%) & Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
    Overspeed: nominal frequency +14% (+24% Overshoot) & Start Output: Solid State 1.2A negative grounding terminal & Run Output: Solid State 1.2A negative grounding terminal & Pre-heat Output: Solid State1.2A negative grounding terminal & Operating Temperature Range: -30 to +70C
    The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
    Additionally, the Autostart versions(701as) of the controller will respond to a remote switched input to begin the start sequence.
    Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.
    Style: 701MS (Manual) 701AS (Auto)
    Power Supply: 8 to 35 Vdc Continuous
    Cranking Dropouts: Able to survive voltage dips during cranking.Without the need for internal batteries.
    Alternator Input Range :15 - 305 V AC RMS (+20%)
    Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
    Overspeed: nominal frequency +14% (+24% Overshoot)
    Start Output: Solid State 1.2A negative grounding terminal
    Run Output: Solid State 1.2A negative grounding terminal
    Pre-heat Output: Solid State1.2A negative grounding terminal
    Operating Temperature Range: -30 to +70C
  •
    $98.00
    $98.00
    $0.00

    DSE5110 Generator Electronic Controller Control Module
    Free Shipping
    Interchange part number:     DSE5110

    Description: 
    Features: |
    1. 132 x 64 pixel LCD display, easy to read data. 
    2. Accurately display time and record time. 
    3. Multiple start and stop cycles can be preset. 
    4. Maintenance cycle reminder function can be preset. 
    5. Remote monitoring through the network (with DSE855). 
    Model: DSE5110 
    Power supply: DC 8~35V continuous Start relay 
    output:16AmpDC system DC voltage Fuel relay 
    output: 16Amp DC system DC voltage Auxiliary relay 
    output: 5Amp DC system DC voltage Operating temperature range: -30 ~ +70C Charging failure/excitation 
    range: 0V~35V Maximum operating
     current: 425(12V); 215MA (24V)

    Condition: New,Replacement

  •
    $69.00
    $69.00
    $0.00

    WDPART Deep Sea Controller Panel Module DSE703
    Free Shipping
    Interchange part number:     DSE703

    Description: 
    Automatic mains (utility) supply monitoring
    Load changeover control
    Manual start
    Protected solid state (PSS) outputs
    Front panel mounting
    Front panel programming
    LED indicators
    Configurable timers
    Configurable outputs
    Single/three phase mains sensing

    Condition: Replacement New

  •
    $1,539.00
    $1,539.00
    $0.00
    Generator Controller DSE8610 for Deep Sea
    Interchange part number:DSE8610 

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Deep-Sea Electronics DSE8610 Synchronising & Load Sharing Control Module

    The DSE8610 is an intelligent mono display auto-start load share control module packed with industry-leading features to enhance multi-set control. The module can be synchronized with up to 32 generators within the same system.
    OVERALL SIZE:240 mm x 181 mm x 42 mm 

    Key Features and Benefits:
     32-set synchronization.

     It offers optimum flexibility for system expansion.

    Configurable inputs/outputs (11/8).

    It provides multiple installation options.

    Dead bus sensing.

    It provides rapid power delivery on multi-set systems.

    Remote communications (RS232, RS485, Ethernet).

    Provides secure and simple off-site monitoring. All ports are continuously active.

    Direct governor & AVR control.

    Eliminates the requirement for external control equipment.

    kW & kV Ar load sharing.

    Provides controlled power delivery.

    Configurable event log (250).

    Provides access to historical alarms and operational status.

    Integral PLC editor.

    Ensures additional applications are easily integrated into the system.

    Load switching, load shedding & dummy load outputs.

    Allows load options and dummy load requirements to be independently controlled.

    Power monitoring (kW h, kVAr, kV Ah, kV Ar h), reverse power protection, kW overload protection.

    It provides clear accurate power measurement information.

    Data logging (HDD/USB).

    Provides current and historical status information.

    DSE Configuration Suite PC Software.

    Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

    Tier 4 CAN engine support.

    Ensures the control module can be used with the latest in modern electronic engineering technology.
  •
    $140.00
    $140.00
    $0.00
    DSE5120 Module Control Panel for Deep Sea
    Free Shipping
    Interchange part number:DSE5120

    Description:
    Main features
    1.    micro-computer control
    2.automatically activated, the shutdown
    3.real-time display
    4.visualization of the police state of graphics
    5.quick information display unit
    6.LED and LCD alarm instructions
    7.Programmable relay output
    Control Features
    1.    Emergency Parking Control
    2.Automatic Car Plate
    3.StartDelay Control
    4.LocalManually Start / Shutdown
    5.RemoteAutomatic Start / Shutdown
    6.Pre-warm,Pre-controlled oil
    7.Coldmachine, Parking For Electricity
    8.ATSswitch control

    Display Data
    1.    Speed of Generator
    2.Battery Voltage
    3.Oil Pressure of Engine
    4.Water Temperature of Engine
    5.Generating Unit Output Frequency Of Exchange
    6.Operating Time of Generator Set
    7.Load-phase AC current
    8.Exchange phase Voltage

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $80.00
    $80.00
    $0.00
    Electronics Controller Module AMF Unit DSE704 for Deep Sea
    Free Shipping

    Interchange part number:DSE704

    Description:
    Automatic mains (utility) supply monitoring
    Automatic shutdown when fault conditions are detected
    Manual start
    Engine pre-heat
    Engine monitoring and protection features
    Protected Solid State (PSS) outputs
    Front panel mounting
    Front panel programming
    Tamper proof engine hours counter
    Remote start
    LED indicators
    Configurable timers
    Configurable outputs
    Single/three phase mains sensing

    Condition: New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $135.00
    $135.00
    $0.00

    WDPART Deep Sea Controller DSE710 Module
    Free Shipping
    Interchange part number:DSE710

    Condition: New, Replacement

    Description:
    Specific Data：
    1.     Automatic Mains Supply Monitoring              2. Emergency Stop Control
    3. Automatic Control Of Overcrank                    4. Local Manual Start/Stop
    5. Remote Automatic Start/Stop                        6. Start Motor Automatic Exit Control
    7. Preheat Control Of Multiple Modes               8. Parking Power Supply Control
    9. Dual Power Switch Switching Control           10. Start Delay Control

    Product Protection Function:
    1.    Lubricating Oil Pressure Low Protection
    2.Charging Machine Charging Failure
    3.Generator Set Emergency Stop
    4.Generator Set Public Alarm
    5.Generator Overvoltage, Undervoltage, Overload Protection, Cooling Water Temperature High Protection
    6.Engine Overclocking /Low-Frequency Protection
    7.Engine Stop / Start Failure


    Specification:
    1.    ModelDSE710
    2.DC SupplyContinuous Voltage Rating
    3.8 V to 35 V continuous
    4.Maximum Operating Current
    5.180 mA at 12 V; 190 mA at 24 V
    6.Maximum Standby Current
    7.145 mA at 12 V; 150 mA at 24 V
    8.OutputAuxiliary
    9.Solid state
    10.2.4A DC at supply voltage
    11.Fuel/Start
    12.Solid state
    13.3.4 A DC at supply voltage
    14.Generator C.T.
    15.5 A secondary 0.5 VAGenerator Inpu t Range
    16.35 V(L-N) to 333 V AC(L-N) absolute maximum
    17.50 Hz - 60 Hz (min 15 V AC)
  •
    $45.90
    $45.90
    $0.00
    Manual Start Generator Controller DSE701MS for Deep Sea
    Free Shipping
    Application：

    Deep Sea

    Interchange part number:    DSE701MS

    Description:
    Specification:
    1.Condition: 100% Brand New
    2.Item Type: Generator Controller
    3.Material: Plastic
    4.Model: DSE702MS
    5.Mounting Hole Size: Approx. 68 * 68mm / 2.7 * 2.7in

    Package List:
    1 * Generator Controller
    2 * Fixing screw
    2 * Key

    Note:
    1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

    Condition:     New,Replacement

  •
    $45.90
    $45.90
    $0.00
    Manual Key Start DSE501K Controller Electronics Modul
    Free Shipping
    Interchange part number:     DSE501K 

    Description: 
    1.    This product 501K is compatible with DSE501K.
    2.The 501K is a Manual Start Control Module, which has been designed to manually control the engine via a key switch on the front panel. The module is used to start and stop the engine, indicate fault conditions, automatically shut down the engine and show the fault condition by LED.
    3.The module has the ability to monitor the following conditions: Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown and Overspeed. Each alarm channel has its own LED indicator and once activated no further alarm conditions will be accepted
    Feature:
    1.    DC Supply:9 to 33 V Continuous.
    2.Cranking Dropouts:
    3.Able to survive voltage dips during cranking.
    4.This is achieved without the need for internal batteries.
    5.Alternator Input Range:15 - 305 V AC RMS
    6.Alternator Input Frequency:50 - 60 Hz at rated engine speed.
    7.Magnetic Input Range:0.5 V to +/- 80 V
    8.Magnetic Input Frequency: 2300Hz to 6000 Hz at rated engine speed.
    9.Start Relay Output:16 Amp DC at supply voltage.
    10.Run Relay Output:16 Amp DC at supply voltage.
    11.Alarm Output:1 Amp DC at supply voltage.
    12.Dimensions:72 X 72 X 118.5 (Excluding Key-switch)
    13.Operating Temperature Range:-30 to +70 C

    Condition: New
  • $853.00
    $853.00
    $0.00
    Deep Sea Auto Transfer Switch Control Module DSE333 DSE160

    Free Shipping

    Interchange part number:DSE333 DSE160

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    KEY FEATURES
    1.    Volt-free relays
    2.Supports many topologies
    3.Automatic switch-over between supplies
    4.Check sync feature
    5.Real-time clock
    6.10 configurable inputs
    7.5 configurable outputs
    8.Event log (10)
    9.Configurable timers
    10.Automatic shutdown or warning when fault conditions are detected
    11.PC configuration
    12.Front panel configuration
    13.LED indicators
    14.The back-lit 4-line text LCD display
    15.External mains (utility) or Genset failure inputs
    16.Auto start inhibit
    17.Load inhibit
    18.Manual restore to mains (utility)
    19.Optional current monitoring
    KEY BENEFITS
    1.    Fully automatic monitoring and switch-over control minimizes the effects of power disruptions
    2.The real-time clock provides accurate event information for easy maintenance diagnostics
    3.User-friendly set-up and button layout
    4.Will work with external synchronizer for a seamless return to mains (utility)
  •
    $853.00
    $853.00
    $0.00
    Deep Sea DSE333 Auto Transfer Switch Control Module

    Interchange part number:DSE333

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    KEY FEATURES
    1.    Volt-free relays                                                        2. Supports many topologies
    3. Automatic switch-over between supplies              4. Check sync feature
    5.Real-time clock                                                         5.10 configurable inputs
    6.configurable outputs                                                7.Event log 
    8.Configurable timers  
    9.Automatic shutdown or warning when fault conditions are detected
    10.PC configuration                                                     11.Front panel configuration
    12.LED indicators   13.The back-lit 4-line text LCD display
    14.External mains (utility) or Genset failure inputs      15.Auto start inhibit
    16.Load inhibit       17.Manual restore to mains 
    18.Optional current monitoring

    KEY BENEFITS

    Fully automatic monitoring and switch-over control minimizes the effects of power disruptions
    The real-time clock provides accurate event information for easy maintenance diagnostics
    User-friendly set-up and button layout
    Will work with external synchronizer for a seamless return to mains 

    DC SUPPLY
    CONTINUOUS VOLTAGE RATING
    8 V to 35 V Continuous
    CRANKING DROPOUTS
    Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recover to 5 V. This is achieved without the need for internal batteries. LEDs and backlights will not be maintained during cranking.
    MAXIMUM OPERATING CURRENT
    292 mA at 12 V, 167 mA at 24 V
    MAXIMUM STANDBY CURRENT
    101 mA at 12 V, 66 mA at 24 V
    MAINS (UTILITY)
    VOLTAGE RANGE
    15 V to 333 V AC (L-N)
    FREQUENCY RANGE
    3.5 Hz to 75 Hz
    OUTPUTS
    OUTPUT A (MAINS/UTILITY)
    Normally closed relay output
    8 A AC at 250 V AC
    OUTPUT B (GENERATOR)
    Normally open volt-free output
    8 A at 250 V AC
    OUTPUT C (START)
    Normally closed volt-free output
    8 A DC at 35 V DC (UL Rating 30 V)
    OUTPUT D (CHANGEOVER)
    Normally open volt-free output
    8 A at 250 V AC
    OUTPUT E
    Normally open volt-free output
    8 A at 250 V AC
    GENERATOR
    VOLTAGE RANGE
    15 V to 333 V AC (L-N)
    FREQUENCY RANGE
    3.5 Hz to 75 Hz
    MAGNETIC PICK UP
  •
    $510.00
    $510.00
    $0.00
    Deep Sea DSE4130 Auto Transfer Switch Control Module

    Free Shipping

    Interchange part number: DSE4130

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    The DSE4130 is an Automatic Transfer Switch controller for genset and other applications. The module will monitor the voltage and frequency of the incoming AC mains (utility) supply and in the event of a failure, will issue a start command to the generator control system. This module is now obsolete and can be replaced by the following modules that have similar or improved functionality: Please note the sizes may differ.
    Once the generator is available and producing an output within limits, the DSE4130 will control the transfer device and switch the load from the mains (utility) to the generating set.Once the mains (utility) supply returns to within limits, the module will command a return to the mains (utility) supply and shut down the generator after a suitable cooling run. Various timing sequences are available to prevent nuisance from starting on minor supply breaks. The module can be easily configured via the front panel.


    KEY FEATURES
    Automatic mains supply monitoring
    Load changeover control
    Manual start
    Protected Solid State (PSS) outputs
    Front panel mounting
    Front panel programming
    LED indicators
    Configurable timers
    Single/three-phase mainssensing
    Remote start input
    KEY BENEFITS
    Transfers between mains (utility) and generator power

    On-site module configuration to match user requirements
  •
    $428.00
    $428.00
    $0.00

    Deep Sea DSE6120 Auto Mains Failure Control Module
    Free Shipping
    Alternative part number:DSE6120

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    Support for 0-10 V & 4-20mA oil pressure senders.
    It provides flexibility for use with multiple sensors and engine types.
    Ensures the display continues to operate in extreme cold weather conditions.
    Provides true generator and mains (utility) sensing.
    Generator/load current monitoring & protection.

    Product description
    Specification
    DC Supply: continuous voltage rating 8 V to 35 V Continuous
    Cranking Dropouts: Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recover to 5 V. This is achieved without the need for internal batteries. LEDs and backlights will not be maintained during cranking.
    Maximum Operating Current: 100 mA at 12 V, 105 mA at 24 V
    Maximum Standby Current: 60 mA at 12 V, 55 mA at 24 V
    Maximum Sleep Current:40 mA at 12 V, 35 mA at 24 V
    Generator & Mains(Utility):
    Voltage Range: 15 V to 415 V AC (Ph to N); 26 V to 719 V AC (Ph to Ph)
    Frequency Range: 3.5 Hz to 75 Hz
    Inputs: Digital Inputs A to F, negative switching analog input A
    Configurable as:
    Negative switching digital input
    0 V to 10 V        4 mA to 20 mA        0 | to 240 |
    Analogue Inputs B to D
    Configurable as: Negative switching digital input 0 | to 480 |
    Outputs:
    Output A (Fuel)
    10 A short term, 5 A continuous,
    at supply voltage
    Output B (Start)
    10 A short term, 5 A continuous,
    at supply voltage
    Auxiliary Outputs C, D, E & F
    2 A DC at a supply voltage

    Package List:
    1 x Generator Controller
    2 x Set Screws

Aller sur le site d'origine