Choose DeepSea Controller at WDPART.

39 des produits

What is a deep sea controller?
Deep Sea Electronics is one of the world's top manufacturers of generator controllers and automatic transfer switch controllers.

What does a generator controller do?
The controller system monitors the operation of the engine and generator functions. Typical safety items include low oil pressure, high temperature, excessive engine starting, frequency (speed) too high/low, low coolant level, etc.

DeepSea controller
DSE is a range of intelligent single and multi-generator control solutions, power (utility) protection relays, light tower control solutions, digital automatic voltage regulators (AVR), remote communication equipment and expansion modules. Each range is designed and manufactured by industry-leading experts to deliver a range of features and benefits that set new standards across the industry.

View our online product guides and contact us at info@wdpart.com for quotes and details.

What are the symptoms of a damaged electronic control module?
Malfunction Indicator Lamp (MIL) lighting.
Poor performance.
Difficulty starting and/or stalling.
Emissions increase.
Fuel economy is poor.

Which DeepSea controller can WDPART supply?
WDPART can supply include DSE6110 DSE7210 DSE702MS DSE103 DSE4420 DSE701 DSE335 DSE8610 DSE5120 DSE710 DSE701MS DSE5110 DSE333 DSE3110 DSE6120 DSE7510 DSE8660 DSE9130 DSE9255 DSE6020 DSE509 DSE8810 DSE7420 DSE2157 DSE7310 DSE5220 and so on.

 

  •
    $88.00
    $88.00
    $0.00
    Deep Sea DSE720 Auto Mains (Utility) Failure Control Module
    Free Shipping
    Interchange part number:DSE720 
    Description:
    1.    DSE 720 is an Automatic Mains Failure Control Module and automatic shutdown or warning when fault conditions are detected
    2.The module has been designed to monitor generator frequency, volts, current; Engine oil pressure, coolant temperature, speed, running hours and battery volts
    3.Transfer between mains (utility) and generator power
    4.On-site module configuration and remote configuration (Max 100 Meters) using PC software
    5.User-friendly set-up and button layout & Multiple engine parameters are monitored simultaneously


    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    FEATURES:
    1.    PC configurable                               2.Digital and analog inputs
    3.Digital outputs                                 4. Automatic mains (utility) provides monitoring
    5. Automatic shutdown or warning when fault conditions are detected
    6.Manual start                                    7.Engine pre-heat
    8.Engine monitoring and protection features 9.Protected Solid State (PSS) outputs
    10.Front panel mounting                  11.Front panel programming
    12.Tamper-proof engine hours counter   13.Remote start
    14.LED indicators                              15. Configurable timers
    16.Configurable outputs                   17.Configurable inputs
    18.Back-lit character/icon LCD display

    BENEFITS:
    1.    Transfer between mains (utility) and generator power
    2.On-site module configuration and remote configuration (Max 100 Meters) using PC software
    3.User-friendly set-up and button layout
    4.Multiple engine parameters are monitored simultaneously
    5.License-free PC software

  •
    $1,900.00
    $1,900.00
    $0.00

    Deep Sea DSE7510 Auto Start Load Share Control Module

    Free Shipping

    Interchange part number:DSE7510

    Description:
    1.The DSE7510 is an Automatic Engine Control Module, designed to provide advanced load share functionality for diesel and gas generating sets that include electronic and non-electronic engines
    2.The module¡¯s load share functions include automatic synchronizing with a built-in synchroscope and closing onto a dead bus. Direct and flexible outputs from the module are provided to allow connection to the most commonly used speed governors and automatic voltage regulators (AVRs)
    3.A sophisticated module monitoring an extensive number of engine parameters, the DSE7510 will annunciate engine shutdowns, warnings, and engine status information on the back-lit LCD screen, by illuminated LED, on a remote PC, by audible alarm and via SMS text alerts (GSM modem required). The module includes RS232 and RS485 ports as well as dedicated terminals for system expansion

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $3,446.00
    $3,446.00
    $0.00

    Deep Sea DSE7560 Auto Transfer Switch Mains Control Module

    Free Shipping

    Interchange part number:
    DSE7560

    Description:
    Control Module

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    MODULE CAPABILITIES
    Fixed export with mains (utility) supply
    Will synchronize any combination of up to 16 gensets with up to 16 mains (utilities) up to a maximum of 20 in one system e.g. 16 gen-sets + 4 mains, 4 gensets + 16 mains etc

    KEY LOAD SHARE FEATURES
    Fixed export with mains (utility)
    Volts and frequency matching
    kW and kV Ar sharing
    Dead bus sensing
    Peak lopping
    Peak shaving
    No break return
    Load demand scheme
    R.O.C.O.F & Vector Shift
    Mains (utility) de-coupling test facility
    Multiple mains (utility) monitoring
    Synchronizing up to 16 generators
    Sequential start
    Auto-ID negotiation

    KEY FEATURES

    4-Line backlit LCD text display
    Five key menu navigation
    Front panel editing with PIN protection
    Multiple display languages
    LED and LCD alarm indication
    Customizable status screens
    9 configurable inputs
    5 configurable outputs
    Configurable timers and alarms
    Multiple dates and time scheduler
    Event log (25)
    Mains (utility) fail to monitor
    Automatic load transfer between mains (utility) and generator
    Manual load transfer between mains (utility) and generator
    Audible alarm
    Backed-up real-time clock
    Fully configurable via by DSE7500 PC software
    Multiple display languages
    Remote SCADA monitoring and control via DSE7500 PC software
    RS485 communications

    KEY BENEFITS

    132 x 64 Pixel ratio display for clarity
    The real-time clock provides accurate event logging
    Remote monitoring of module using comprehensive DSE7500 PC software
    Ethernet communications (via DSE860/865 modules), provides advanced remote monitoring at low cost
    Modules can be integrated into building management systems (BMS)
    Surplus energy/power can be sold back to the grid (subject to local mains/utility supplier)
    License-free PC software
    IP65 rating (with supplied gasket) offers advanced protection from water ingress

  •
    $2,453.00
    $2,453.00
    $0.00
    Deep Sea DSE8660 Auto Transfer Switch Mains Control Module
    Free Shipping
    Interchange part number:DSE8660
    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    The DSE8660 is an easy-to-use single or multi-mains controller with automatic transfer switch capability. Designed to synchronize single or multiple DSE8610s and DSE8680s with single or multiple mains (utility) supplies, the DSE8660 will automatically control the change over from mains (utility) to generator supply or run generators in synchronization with the mains (utility) to provide no-break, peak lopping, and peak shaving power solutions.
    The module can indicate operational status and fault conditions on the LCD screen (multiple languages available), by illuminated LED, audible sounder and SMS messaging. Comprehensive communications are also available via RS232, RS485 & Ethernet for remote PC control and monitoring, and integration into building management systems. The comprehensive event log will record up to 250 events to facilitate maintenance.
    An extensive number of fixed and flexible monitoring and protection features are included. Easy alteration of the sequences, timers, and alarms can be made using the DSE PC Configuration Suite Software. The selected configuration is also available via the module¡¯s front panel. With all communication ports capable of being active at the same time, the DSE8xxx Series is ideal for a wide variety of demanding load share applications.
    KEY LOAD SHARE FEATURES(WITH DSE8x10) :
    1.Peak lopping/shaving                               2.Sequential set start
    3.Manual voltage/frequency adjustment    4.R.O.C.O.F. and vector shift protection
    5.Generator load demand                           6.Automatic hours run balancing
    7.Mains (Utility) de-coupling                       8.Mains (Utility) de-coupling test mode
    9.Bus failure detection                                10.Volts and frequency matching.
    11.kW & kV Ar load sharing
  •
    $169.00
    $169.00
    $0.00
    Deep Sea DSE9130 5 AMP 12V Battery Charger Controller

    Free Shipping

    Interchange part number: DSE9130

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    1.    DSE9130 12 Volt 5 Amp Switch-Mode Battery Charger keeps batteries charged to their maximum capacity at all times
    2.Automatic float mode return. Prevents overcharging battery damage.
    3.Reverse polarity, short-circuit and current limiting protection. Prevents damage to the charger and battery, to provide secure and reliable operation.
    4.Power save mode. Ensures the battery maintains enough power at all times. No moving parts. Ensures longer battery charger life.
    5.Provides an efficient, economical and cool running battery charger

    The DSE9130 12 volt 5 amp Switch-Mode Battery Charger keeps batteries charged to their maximum capacity at all times. It is designed for permanent battery connection and can be DIN rail or chassis mounted. The charger includes a normal or overload condition LED indicator on the front to assist with status identification, operates during cranking and running and accepts multiple AC voltage connections.

    1.12V Intelligent Battery Charger 6A
    2.Operation voltage 12V
    3.Operation Ampere 6A
    4.OVERALL SIZE 136 mm x 140 mm x 63 mm (5.4" x 5.5" x 2.5")
    5.PRODUCT VARIANTS：
    6.9130-00 - 12 volt 5 amp Compact Battery Charger (90v-305v 50/60Hz)
  •
    $169.00
    $169.00
    $0.00

    Deep Sea DSE9255 5AMP 24V Battery Charger Controller

    Free Shipping

    Interchange part number:DSE9255

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description:
    1.    DSE9255 Provides flexibility for operation with various battery type technologies
    2.Automatic float mode return. Prevents overcharging battery damage.
    3.Reverse polarity, short-circuit and current limiting protection. Prevents damage to the charger and battery, to provide secure and reliable operation.
    4.Power save mode. Ensures the battery maintains enough power at all times. No moving parts. Ensures longer battery charger life.
    5.Provides an efficient, economical and cool running battery charger

    KEY FEATURES AND BENEFITS
    1.    Constant current/constant voltage
    2.Provides flexibility for operation with various battery type technologies.
    3.Automatic float mode return.
    4.Prevents overcharging battery damage.
    5.Low output ripple.
    6.Safe charging of both sealed and vented battery types.
    7.Reverse polarity, short-circuit and current limiting protection.
    8.Prevents damage to the charger and battery, to provide secure and reliable operation.
    9.Auto recovery on fault condition removal.
    10.Ensures the charger resumes operation without needing to be manually reset.
    11.Cell charge boost and equalizing.
    12.Flexible configuration of the battery charger to suit battery parameters and installations.
    13.Power save mode.
    14.Ensures the battery maintains enough power at all times.
    15.No moving parts.
    16.Ensures longer battery charger life.
    17.Chargers can be linked together.
    18.Increases the current output available.
    19.Charge fail output.
    20.Provides remote warning in the event of a power failure.
    21.80% operating efficiency.
    22.Provides an efficient, economical and cool running battery charger.
    23.Dedicated boost connection terminals.
    24.Provides a quicker charging cycle for discharged batteries.
  •
    $189.00
    $189.00
    $0.00
    WDPART Deep Sea DSE5210 Auto Start Control Module
    Free Shipping
    Interchange part number: DSE5210
    Condition:New, Replacement

    Description: 
    Full integration into new and existing building management systems
    The module also provides excellent engine monitoring and protection features
    Remote module configuration using PC software
    Displays fault conditions on the LCD display and via the LED indicators on the front.
    Dimensions: 240mm x 172mm ; Cut-out Size: 220mm x 160mm  DC Supply: 8-35V
    The DSE5210 is an Automatic Start Control Module designed to automatically start and stop diesel and gas generating sets that include on electronic engines. The module also provides excellent engine monitoring and protection features.
    The module has the ability to monitor under-speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts, over current, under/over generator frequency, low/high DC battery volts, low fuel alarm and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front.

    FEATURES:
    1.Automatic start                                  2.Automatic load transfer
    3.Configurable inputs                           4.Configurable outputs
    5.Configurable alarms & timers            6.Digital inputs
    7.Analog inputs                                     8.Back-lit character LCD display
    9.Engine protection                              10.Front panel mounting
    11.PC configurable                               12.Front panel programming
    13.Remote monitoring                          14.Modbus RTU
    15.Engine history event log                  16.LED alarm indication
    17.LCD alarm indication                        18.SMS messaging
    19.Hid till lit alarm icons                      20.Engine exercise mode
    21.Magnetic pick-up
    22.RS485 remote communications (to be specified on ordering)
    BENEFITS:
    Full integration into new and existing building management systems
    In-built engine diagnostics removes the requirement for service equipment
    License-free PC software
    Modules help to improve the life cycle of engine starter motors
    On-site module configuration to match user requirements
    Remote module configuration using PC software
    Modules send SMS messages to engineers to notify specific engine problems (GSM Modem and SIM Card required)
    User-friendly set-up and button layout
  •
    $465.00
    $465.00
    $0.00

    DSE6020 Auto Mains Failure Control Module

    Free Shipping

    Interchange part number:DSE6020 

    Description:     
    Auto Mains Failure Control Module

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    KEY FEATURES
    1.Large back-lit icon display
    2.Heated display option available
    3.Fully configurable via the fascia or PC using USB communication
    4.Efficient power save mode
    5.phase generator sensing
    6.phase mains (utility) sensing (DSE6020 MKII only)
    7.Generator/load power monitoring (kW, kV A, kV Ar, pf)
    8.Generator overload protection (kW)
    9.Generator/load current monitoring and protection
    10.Breaker control via fascia buttons
    11.Fuel and start outputs, configurable when using CAN
    12.configurable DC outputs
    13.configurable analogue/digital inputs
    14.configurable digital inputs
    15.Support for 0-10 V & 4-20 mA oil pressure sensors
    16.Configurable staged loading outputs
    17.CAN, MPU and alternator speed sensing in one variant
    18.engine maintenance alarms
    19.Engine speed protection
    20.Engine hours counter
    21.Engine pre-heat
    22.Engine run-time scheduler
    23.Engine idle control for starting & stopping
    24.Fuel pump control
    25.Real-time clock
    26.Battery voltage monitoring
    27.Start on low battery voltage
    28.Configurable remote start input
    29.alternative configuration
    30.Comprehensive warning, electrical trip or shutdown protection upon a fault condition
    31.LCD and LED alarm indication
    32.Configurable event log (50)
  •
    $2,300.00
    $2,300.00
    $0.00
    Free Shipping Deep Sea Auto Start Load Share Panel DSE8810
    Free Shipping
    Interchange part number: 

    DSE8810

    Condition: New, Original

    OVERALL SIZE

    245 mm x 184 mm x 50 mm (9.6” x 7.2” x 2.0”)

    PANEL CUTOUT SIZE

    220 mm x 160 mm (8.7″ x 6.3″)

    MAXIMUM PANEL THICKNESS

    8.0 mm (0.3”)

    WEIGHT

    0.98kg

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description: 

    The DSE8810 is an easy-to-use, load share module, designed to synchronize and work within a load share system of up to 32 generators including electronic and non-electronic engines.
    The DSE8810 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
    System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder. The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and
    flexible monitoring, metering, and protection features are included as well as comprehensive communication and system expansion options.
    Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers, and alarms. With all communication ports capable of being active at the same time, the DSE8810 is ideal for a wide variety of demanding load share applications.
    KEY LOAD SHARE FEATURES:
    1.Sequential set start                                2.R.O.C.O.F. and vector shift 
    3.Generator load demand                        4. Automatic hours run balancing
    5.Dead bus sensing                                  6.Bus failure detection
    7.Direct governor and AVR control          8.Volts and frequency matching 
    9.kW and kV Ar load sharing
    KEY FEATURES
    Comprehensive loadshare capabilities
    Configurable inputs (12) 
     Configurable outputs (10) 
     Voltage measurement 
    Built-in governor and AVR control
    kW overload alarms 
    Comprehensive electrical protection
    Magnetic pick-up 
    Electronic engine capability
    RS232, RS485 & Ethernet remote communications
    Two RS485 ports
    Modbus RTU 
    PLC functionality 
    Multi event exercise timer
    Back-lit LCD graphical display 
    Multiple display languages
    Automatic start/Manual start
    Audible alarm
    Reduced file transfer time
    Fixed and flexible LED indicators
    Event log (250)
    Engine protection
    Fault condition notification to a designated PC
    Protected front panel programming
    PC configuration 
    Fully configurable
    SMS alert messaging
    Compatible with DSE8700 & DSE8600 Series
    KEY BENEFITS
    1.Dual processor for improved response
     2.RS232, RS485 & Ethernet can be used at the same time 
    3.High number of inputs and outputs 
    4.Worldwide language support 
    5. Data logging & trending 
    6.Harmonics display for clear monitoring (available soon)
    7. Modules can be integrated into building management systems (BMS) 
    8.Licence-free PC software 
    9.IP65 rating (with supplied gasket) offers increased resistance to water ingress 
    10.PLC editor allows user configurable functions to meet specific application 
    Specification
    DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 600 mA at 12 V, 300 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 CHARGE FAIL/EXCITATION RANGE 0 V to 35 V
    OUTPUTS OUTPUT A (FUEL) 15 A DC at supply voltage OUTPUT B (CRANK) 15 A DC at supply voltage OUTPUTS C & D 8 A AC at 250 V AC (Volt free) AUXILIARY OUTPUTS E TO L 2 A DC at supply voltage
    GENERATOR & BUS VOLTAGE RANGE 15 V to 333 V AC (L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz
    MAGNETIC PICK-UP VOLTAGE RANGE +/- 0.5 V to 70 V FREQUENCY RANGE 10,000 Hz (max)
    BUILT-IN GOVERNOR CONTROL MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE +/- 10 V DC Fully isolated
    BUILT-IN AVR CONTROL MINIMUM LOAD IMPEDANCE 1000Ω Fully isolated GAIN VOLTAGE 0 V to 10 V DC Fully isolated OFFSET VOLTAGE+/- 10 V DC Fully isolated
    DIMENSIONS OVERALL 245 mm x 184 mm x 50 mm 9.6” x 7.2” x 2” PANEL CUTOUT 220 mm x 160 mm 8.7” x 6.3” MAXIMUM PANEL THICKNESS 8 mm 0.3”
    STORAGE TEMPERATURE RANGE -40 oC to +85 oC
    Environmental Testing Standards
    ELECTRO-MAGNETIC COMPATIBILITY
    BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment
    ELECTRICAL SAFETY
    BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment
    TEMPERATURE
    BS EN 60068-2-1 Ab/Ae Cold Test -30 °C BS EN 60068-2-2 Bb/Be Dry Heat +70 °C
    VIBRATION
    BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn
    HUMIDITY
    BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 °C @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 °C @ 93% RH 48 Hours
    SHOCK
    BS EN 60068-2-7 Three shocks in each of three major axes 15 gn in 11 mS
    DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
    BS EN 60529 IP65 – Front of module when installed into the control panel with the supplied sealing gasket.
  •
    $2,027.00
    $2,027.00
    $0.00

    DSE8620 Synchronising Load Sharing Auto Control Module

    Free Shipping

    Interchange part number: DSE8620 

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Description: 
    1.Deep Sea Electronics DSE8620 Synchronising & Load Sharing Auto Mains Utility Failure Control Module
    2.The DSE8620 is an intelligent mono display auto mains (utility) failure load share control module packed with industry-leading features to enhance paralleling single gensets with a mains (utility) supply.
    3.The DSE 8620 automatically controls the change over between mains (utility) and generator power and can also be configured to run a generator in synchronization with a mains (utility) supply.
    OVERALL SIZE:240 mm x 181 mm x 42 mm

    PANEL CUTOUT SIZE:220 mm x 160 mm 
    MAXIMUM PANEL THICKNESS:8.0 mm 
    Key Features and Benefits:
    Mains failure detection, mains  power monitoring (kW, kV Ar, kV A & pf) monitoring, mains decoupling protection, mains  kW export protection.
    Gives full mains  back-up and provides no break synchronisation that includes peak lopping and peak shaving options with mains power monitoring.
    Configurable inputs/outputs (11/8).
    Provides multiple installation options.
    Dead bus sensing.
    Provides rapid power delivery on multi-set systems.
    Direct governor & AVR control.
    Eliminates the requirement for external control equipment.
    Provides controlled power delivery.
    Remote communications (RS232, RS485 x2, Ethernet).
    Provides secure and simple off site monitoring. All ports are continuously active.
    Configurable event log (250).
    Provides access to historical alarms and operational status.
    Integral PLC editor.
    Ensures additional applications are easily integrated into the system.
    Load switching, load shedding & dummy load outputs.
    Allows load options and dummy load requirements to be independently controlled.
    Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.
    Provides clear accurate power measurement information.
    Data logging (HDD/USB).
    Provides current and historical status information.
    DSE Configuration Suite PC Software.
    Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
    Tier 4 CAN engine support.
    Ensures the control module can be used with the latest in modern electronic engine technology.
  •
    $800.00
    $800.00
    $0.00
    DSE7420 Auto Mains (Utility) Failure Control Modules

    Free Shipping
    Interchange part number:DSE7420

    Description:    Auto Mains (Utility) Failure Control Modules

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.


    1.The DSE7420 MKII is an intelligent, powerful auto mains (utility) failure control module with high-level features and functionality.
    2.SNMP GET, SET & TRAP support built-in. Removes the requirement for additional devices
    3.CAN, MPU & alternator speed sensing (selectable depending on engine type).
    4.Configurable digital inputs (8). Provides multiple installation options. Configurable analogue / digital inputs 
    5.Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.
  •
    $409.00
    $409.00
    $0.00
    WDPART DSE2157 Output Expansion Module
    Interchange part number:
    DSE2157

    Description:
    Output Expansion Module

    Maximum operating current
    325 mA at 12 V, 152 mA at 24 V

    Maximum standby current
    70 mA at 12 V, 32 mA at 24 V

    Auxiliary relay contacts
    2 Amp DC rated voltage free

    Condition:New,Original
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  • $75.00
    $75.00
    $0.00
    Deep Sea DSE705 Auto Transfer Switch Control Module
    Free Shipping
    Interchange part number:      DSE705 
    Description: 
    The DSE705 is Transfer Switch Control Modules that have been designed to monitor the mains (utility) supply.
    When the mains (utility) power fails,the module will send a start request to thegenerator control unit.When the generator is up and  running the module transfers theload across.
    When the mains (utility) returns, the module transfers the load back and removes thestart command.The generator should then begin its shutdown procedure.
    The modules can be configured to follow the users’ pre-set start and  stop sequences.

    Condition: New, replacement

    FEATURE:
    1.    Automatic mains (utility) supply monitoring  2.Load changeover control 
    3.Manual start                                                    4.Protected Solid State (PSS) 5.outputs Front panel mounting                      6.Front panel programming 
    7.Remote start input                                        8.LED indicators
    9.Configurable timers                                     10.Single/three phase mains (utility) sensing
  •
    $168.50
    $168.50
    $0.00
    WDPART Control Module Controller DSE5220
    Free Shipping
    Interchange part number: DSE5220
    Description: 
    Model:     DSE 5220
    Main Function:    Auto Mains (Utility) Failure Control Module
    Case Dimensions:    240 x172x 80 mm
    Condition:     New

    Main Features:
    1.Simple structure in linear type ,easy in installation and maintation. 
    2.Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 
    3.High pressure double crank to control the die opening and closing. 
    4.Running in a high automatization and intellectualization,no pollution 
    5.Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
    BENEFITS:
    Full integration into new and existing building management systems
    In-built engine diagnostics removes the requirement for service equipment
    License-free PC software
    Modules help to improve the life cycle of engine starter motors
    On-site module configuration to match user requirements
    Remote module configuration using PC software
    Modules send SMS messages to engineers to notify specific engine problems (GSM Modem and SIM Card required)
    User-friendly set-up and button layout
  •
    $89.90
    $89.90
    $0.00
    DSE3110 MPU Controller UTO Start MPU Model Number 3110-008-01

    Description: 
    The DSE3110 can be utilised as a Manual or Auto Start Module for single gen-set applications or engine only applications. The module has been designed to work with electronic and non-electronic engines, providing advanced
    engine monitoring and protection features.

    The DSE3110 includes a back-lit icon LCD display which clearly shows the status of the engine at all times.

    The module monitors engine speed, frequency, voltage and engine run hours and also displays the warning and shutdown status.The module includes fixed and flexible outputs as well as configurable inputs making this product ideal for a wide variety of applications. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.

    The module is available in two variants:CAN – For use with electronic engines only.

    Optional frequency (Hz) sensing from main AC alternator for genset applications

    MPU/ALT. – For use with nonelectronic engines only (magnetic pick-up/alternator sensing)

    Optional frequency (Hz) sensing from main AC alternator for genset applications

    Optional Magnetic Pickup speed sensing
    ELECTRO-MAGNETIC COMPATIBILITY
    BS EN 61000-6-2
    EMC Generic Immunity Standard for
    the Industrial Environment

    BS EN 61000-6-4
    EMC Generic Emission Standard for
    the Industrial Environment
    ELECTRICAL SAFETY
    BS EN 60950
    Safety of Information Technology Equipment,
    including Electrical Business Equipment

    TEMPERATURE
    BS EN 60068-2-1
    Ab/Ae Cold Test -30 oC
    BS EN 60068-2-2
    Bb/Be Dry Heat +70 oC

    VIBRATION
    BS EN 60068-2-6
    Ten sweeps in each of three
    major axes
    5 Hz to 8 Hz @ +/-7.5 mm,
    8 Hz to 500 Hz @ 2 gn

    HUMIDITY
    BS EN 60068-2-30
    Db Damp Heat Cyclic 20/55 oC
    @ 95% RH 48 Hours
    BS EN 60068-2-78
    Cab Damp Heat Static 40 oC
    @ 93% RH 48 Hours

    SHOCK
    BS EN 60068-2-27
    Three shocks in each of three major axes
    15 gn in 11 mS
  •
    $585.00
    $585.00
    $0.00
    Deep Sea Controller DSE890 8V to 35V Continuous Winco
    Free Shipping
    Application：
    Deep-Sea Controller

    Interchange part number: 
    DSE890

    Description: 
    1.    The DSE890 MKII is an Ethernet/4G gateway device that enables compatible DSE controllers to be monitored remotely via DSEWebNet®.
    2.REQUIRES - Combined 4G LTE (Main & Diversity) and GPS Antenna - 020-1053 if 4G Signal is Needed.
    3.The unit also fully compatible with 2G & 3G.
  •
    $258.00
    $258.00
    $0.00
    Deep Sea DSE855 0855-01 - 855 USB to Device-8V to 35V
    Interchange part number: 
    DSE855

    Description: 
    Deep Sea 

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    The DSE855 communications device allows the monitoring of a single DSE controller with USB connectivity over a LAN or WAN connection. To achieve this the DSE855 utilizes its in-built web server or MODBUS TCP. In order to use over a LAN connection, the on-site router must be configured to be accessible from any global location. 

    DC SUPPLY
    CONTINUOUS VOLTAGE RATING：8 V to 35 V Continuous

    CRANKING DROPOUTS
    Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recover to 5 V. This is achieved without the need for internal batteries. LEDs and backlights will not be maintained during cranking.

    MAXIMUM OPERATING CURRENT：123 mA at 12 V/71 mA at 24 V

    MAXIMUM STANDBY CURRENT：104 mA at 12 V/63 mA at 24 V
  •
    $369.00
    $369.00
    $0.00
    Original Auto Start Control Module DSE7320 DSE7320 MKII 
    Application：
    Deep Sea

    Interchange part number:
    DSE7320 DSE7320 MKII

    Description:

    Auto Start Control Module 

    Condition:     New

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.


    Specifications:
    1.    Engine Parameters: Speed, oil pressure, water temperature, battery voltage, oil level %, operating hours, start times and charging motor voltage
    2.Generator Parameters: Frequency, three-phase voltage (L-L, L-N) and three-phase current
    3.Power Parameters: KVA, KW, PF, KVAR, KWh, KVAH and KVAR
    4.Mains Electricity Parameters: Frequency, three-phase voltage (L-L, L-N)
    5.Alarm Level: Pre-alarm, electrical trip and shut down
    6.Speed Sensor Frequency Range: 1Hz-10KHz
    7.Speed Sensor Voltage Range: ±0.5V (start)~ 70V
    8.Fuel Relay Output A: 15 Amp DC output
    9.Start Output B:15 Amp DC output
    10.Relay Output C and D: 8Amp 250V passive contact output
    11.User-defined output E, F, G and H: 2Amp DC output
    12.Opening Size for Mounting: 22*16cm/8.7*6.3in 

    Function:
    1.    AMF + ATS + communication + extension functions;
    2.Manual control fuel pump;Manual control engine speed (engine has electrically operated injector);Preset running time (units need to start on a regular intervals, to run maintenance operation);
    3.Preset maintenance cycle function (after engine running 250 hours, need to change oil filter, fuel filter, air filter, etc.);
    4.Engine, generator monitoring and protection functions;
    5.Engine speed, engine oil pressure, engine water temperature, battery voltage, generator voltage;
    6.Generator current, engine frequency;Has PLC logical function (maximum supports 50 steps);Sleep mode to save power;
    7.Hierarchical load rejection - loading/hierarchical virtual load (load box);250 event log (with date and time).
     
     
    Package Includes:
    1 x Controller                               
    4 x Screws
  •
    $55.00
    $55.00
    $0.00
    Electronic Auto Start Controller Control Module DSE702K-AS
    Free Shipping
    Application： 
    Genset Generator Parts

    Interchange part number:      
    DSE702K-AS DSE702AS

    Description: 

    Electronic Auto Start Controller Control Module

    Condition: New

    Main Features:
    1.    Manual(702MS)/Auto(702AS) start
    2.Engine pre-heat
    3.Engine monitoring and protection features
    4.Protected solid-state (PSS) outputs
    5.Front panel mounting
    6.Tamper-proof engine hours counter
    7.Remote start

    Operation Manual Mode:
    1.    The module is started using the onboard key/buttons
    2.The user turns the key to the hand position
    3.The engine pre-heat button is then pressed for the required time
    4.The start button is then pressed to start the engine
    5.To stop the engine the key needs to be turned to the off position

    The 702 is a Manual/Auto Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input.
    It also has the capability to monitor battery charging by utilising the WL terminal on the charge alternator. When the module detects a fault condition it automatically shuts down the engine. The input allows the module to be started from a pre-defined remote location.

Aller sur le site d'origine