Choose Generator Parts at WDPART

284 des produits

Why choose generator parts at WDPART?
We have warehouses in USA and China, and will arrange delivery to the nearest location according to your location, so that you can receive the goods faster and continue your work. 

Which generator parts can we support you?
We offer various parts for Generator Parts,including actuators,controllers,automatic regulators,gauge,diode,ATS.
There are three basic types of generators: whole house generators, portable generators and inverter generators.
Application:Perkins Engine 400 Series,Shibaura Tractor,AVR SE350 for Marathon and stamford alternator,FG Wilson genset with Perkins engine,Leroy Somer Generator,FG Wilson genset Perkins with engine......
  •
    $845.00
    $845.00
    $0.00
    Actuator 8404-5003 10000-00251 17360483 for Woodwards
    Free Shipping
    Application:
    Woodwards

    Interchange part number: 
    8404-5003 10000-00251 17360483

    Description: 
    Actuator 

    Voltage：10-32VDC
    Temperature：-40℃~105℃

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $1,187.00
    $1,187.00
    $0.00
    GAC ATB552T2N-12 Actuator Throttle Bodies Packard Connector
    Free Shipping
    Application:
    GAC 

    Interchange part number: 
    ATB552T2N-12 

    Description: 
    Actuator Throttle Bodies

    Condition:New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $601.00
    $601.00
    $0.00

    GAC Actuator ADC100-12V WDPART
    The 100 Series is designed to mount directly to Stanadyne Series fuel injection pumps. When the ADC100 electric actuator is installed on the fuel pump, an integral high performance fuel control system results.No external linkages or brackets are required and no extra Stanadyne parts are needed.In addition when the governor system is de-energized, the ADC100 series provides the function of a fuel shut-off solenoid.

    Free Shipping!
    Application:
    GAC

    Interchange part number:
    ADC100-12V

    Description:
    Actuator

    Condition:New,Replacement

  •
    $973.00
    $973.00
    $0.00

    High Temperature Actuator for GAC ATB552T2N1 24V 55mm
    Application:
    GAC ATB552T2N1 24 55mm Integral Throttle Body

    Interchange part number: 
    ATB552T2N1 

    Description: 
    High Temperature Actuator

    Condition:New, original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

  •
    $58.00
    $58.00
    $0.00
    Diode Bridge 330-25777 ALT411KD001 LSA432-442
    Free Shipping
    Application:
    Leroy Somer

    Interchange part number: 
    330-25777 ALT411KD001 LSA432-442

    Description: 
    Diode Bridge

    Condition:
    New, replacement
  • $289.00
    $289.00
    $0.00
    3rd Generations InteliLite NT AMF 25 Advanced Auto
    Free Shipping!
    Application:
    Compact gen-set controller for single genset operating in standby or prime power modes
    Full gen-set monitoring and protection
    Outstanding EFI engine support with diagnostic messages in plain text via J1939
    Detailed event and performance log with time and date
    Multiple languages (user changeable) in controller, even more in installation suite
    Plug-in and CAN bus extension modules capability
    WebSupervisor and AirGate support*
    Automatic SMS on alarm or event & gen-set control over SMS*
    On-line control and monitoring over web pages (embedded web server) via plug & play IB-Lite
    Optional GSM/GPRS modem/wireless Internet via IL-NT GPRS
    Fuel theft protection and Total fuel consumption monitoring
    Earth fault current protection*
    Alternative switchable configuration
    Dual mutual stand-by (Dual AMF) support
    Supports prime power (MRS) applications
    Automatic and manual GCB and MCB control
    Magnetic pickup input
    D+ preexcitation terminal
    True RMS measurement
    3 phase power measurement of gen-set and mains incl. kWh
    3 configurable analog inputs
    7 binary inputs
    7 binary outputs

    Interchange part number: 
    3rd Generations AMF 25

    Description: 
    3rd Generations InteliLite NT AMF 25

    Condition:New
  • $179.00
    $179.00
    $0.00
    SmartGen CMM366-ET Cloud Monitoring Modem with Wired Ethernet
    SmartGen CMM366-ET Cloud Monitoring Modem
    CMM366-ET Cloud Monitoring Communication Module is an Ethernet communication protocol switch module that can achieve Genset (with SCI) connect to the Internet. The module obtains Genset data via RS485 port, USB port, LINK port or RS232 port of Genset controller modules of international first-class brands including SmartGen, DeepSea, ComAp, etc. Then the module transmits the data to a corresponding cloud server via wired Ethernet for achieving user¡¯s real-time monitoring to running status and searching of running records via APP (IOS or Android) and pc terminal devices.
    CMM366-ET module has already integrated protocols of the mainstream Genset control module. It not only can achieve Genset monitoring but also can insert some digital alarm input/output signal to achieve the monitoring of the generator room entrance guard, guard against theft and fire facilities.
    Free Shipping!
    Application:
    SmartGen

    Interchange part number:
    CMM366-ET

    Description:
    Cloud Monitoring Modem

    Condition: Original SmartGen New
    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $89.00
    $89.00
    $0.00
    Generator Controller Module DSE704 for Deep Sea
    Free Shipping
    Interchange part number:DSE704

    Condition: New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    Feature:
    The products are made of high quality electronic components, and the performance is stable and reliable. Suitable for diesel generator equipment. DC power supply: 8-35V continuous. It can maintain stable performance and reliability in harsh environments. With strict electromagnetic testing, the product is of high quality. 

    Specification:
    Model: DSE704
    DC power supply: 8-35V continuous
    Maximum current: 50mA working,  10mA standby
    Electric ball input range: 75 (middle line) to 277 (middle line) 3-phase 4-wire exchange (+20%)
    Electric ball input frequency: 50-60Hz at rated engine speed (minimum: 75V AC neutral line) (starting off from 15V center line)
    Start output: 1.2A DC supply voltage

    Package list:
    1 * Generator Module Control Panel

  •
    $331.00
    $331.00
    $0.00
    WDPART Deep Sea DSE3110 CAN Control Module
    Free Shipping
    Interchange part number:DSE3110

    Description:

    The DSE3110 is an outstanding compact control module that provides a comprehensive range of features for single-set applications. The controller can be used in manual or auto start mode.

    Condition: New, Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.

    OVERALL SIZE
    98 mm x 79 mm x 40 mm (3.9¡± x 3.1¡± x 1.6¡±)

    PANEL CUTOUT SIZE
    80 mm x 68 mm (3.1 " x 2.7")

    MAXIMUM PANEL THICKNESS
    8.0 mm (0.3)

    CONTINUOUS VOLTAGE RATING
    8 V to 35 V Continuous
    CRANKING DROPOUTS
    Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
    CHARGE FAIL/ EXCITATION
    8 V to 35 V fixed power source 2.5 W
    NOMINAL STANDBY CURRENT
    23 mA at 12 V, 18 mA at 24 V
    MAXIMUM OPERATING CURRENT
    35 mA at 12 V, 30 mA at 24 V
    OUTPUTS
    OUTPUT A (FUEL)
    2 A DC at a supply voltage

    OUTPUT B (START)
    2 A DC at a supply voltage

    AUXILIARY OUTPUTS C & D
    2 A DC at supply voltage
    GENERATOR
    VOLTAGE RANGE
    15 V - 333 V AC (L-N)

    FREQUENCY RANGE
    3.5 Hz to 75 Hz
    MAGNETIC PICK-UP
    VOLTAGE RANGE
    +/- 0.5 V to 70 V

    FREQUENCY RANGE
    10,000 Hz (max)
  •
    $69.90
    $69.90
    $0.00
    Deep Sea DSE701 Manual Auto Start Control Module
    Free Shipping

    Interchange part number: DSE701

    Condition: Replacement New


    Description:
    The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
    Additionally, the Autostart versions (701AS) of the controller will respond to a remote switched input to begin the start sequence.
    Power Supply: DC 8 to 35 V Continuous & Cranking Dropouts: Able to survive voltage dips during cranking. Without the need for internal batteries.
    Alternator Input Range :15-305V AC RMS (+20%) & Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
    Overspeed: nominal frequency +14% (+24% Overshoot) & Start Output: Solid State 1.2A negative grounding terminal & Run Output: Solid State 1.2A negative grounding terminal & Pre-heat Output: Solid State1.2A negative grounding terminal & Operating Temperature Range: -30 to +70C
    The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
    Additionally, the Autostart versions(701as) of the controller will respond to a remote switched input to begin the start sequence.
    Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.
    Style: 701MS (Manual) 701AS (Auto)
    Power Supply: 8 to 35 Vdc Continuous
    Cranking Dropouts: Able to survive voltage dips during cranking.Without the need for internal batteries.
    Alternator Input Range :15 - 305 V AC RMS (+20%)
    Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
    Overspeed: nominal frequency +14% (+24% Overshoot)
    Start Output: Solid State 1.2A negative grounding terminal
    Run Output: Solid State 1.2A negative grounding terminal
    Pre-heat Output: Solid State1.2A negative grounding terminal
    Operating Temperature Range: -30 to +70C
  •
    $98.00
    $98.00
    $0.00

    DSE5110 Generator Electronic Controller Control Module
    Free Shipping
    Interchange part number:     DSE5110

    Description: 
    Features: |
    1. 132 x 64 pixel LCD display, easy to read data. 
    2. Accurately display time and record time. 
    3. Multiple start and stop cycles can be preset. 
    4. Maintenance cycle reminder function can be preset. 
    5. Remote monitoring through the network (with DSE855). 
    Model: DSE5110 
    Power supply: DC 8~35V continuous Start relay 
    output:16AmpDC system DC voltage Fuel relay 
    output: 16Amp DC system DC voltage Auxiliary relay 
    output: 5Amp DC system DC voltage Operating temperature range: -30 ~ +70C Charging failure/excitation 
    range: 0V~35V Maximum operating
     current: 425(12V); 215MA (24V)

    Condition: New,Replacement

  •
    $69.00
    $69.00
    $0.00

    WDPART Deep Sea Controller Panel Module DSE703
    Free Shipping
    Interchange part number:     DSE703

    Description: 
    Automatic mains (utility) supply monitoring
    Load changeover control
    Manual start
    Protected solid state (PSS) outputs
    Front panel mounting
    Front panel programming
    LED indicators
    Configurable timers
    Configurable outputs
    Single/three phase mains sensing

    Condition: Replacement New

  •
    $369.00
    $369.00
    $0.00
    Original Auto Start Control Module DSE7320 DSE7320 MKII 
    Application：
    Deep Sea

    Interchange part number:
    DSE7320 DSE7320 MKII

    Description:

    Auto Start Control Module 

    Condition:     New

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.


    Specifications:
    1.    Engine Parameters: Speed, oil pressure, water temperature, battery voltage, oil level %, operating hours, start times and charging motor voltage
    2.Generator Parameters: Frequency, three-phase voltage (L-L, L-N) and three-phase current
    3.Power Parameters: KVA, KW, PF, KVAR, KWh, KVAH and KVAR
    4.Mains Electricity Parameters: Frequency, three-phase voltage (L-L, L-N)
    5.Alarm Level: Pre-alarm, electrical trip and shut down
    6.Speed Sensor Frequency Range: 1Hz-10KHz
    7.Speed Sensor Voltage Range: ±0.5V (start)~ 70V
    8.Fuel Relay Output A: 15 Amp DC output
    9.Start Output B:15 Amp DC output
    10.Relay Output C and D: 8Amp 250V passive contact output
    11.User-defined output E, F, G and H: 2Amp DC output
    12.Opening Size for Mounting: 22*16cm/8.7*6.3in 

    Function:
    1.    AMF + ATS + communication + extension functions;
    2.Manual control fuel pump;Manual control engine speed (engine has electrically operated injector);Preset running time (units need to start on a regular intervals, to run maintenance operation);
    3.Preset maintenance cycle function (after engine running 250 hours, need to change oil filter, fuel filter, air filter, etc.);
    4.Engine, generator monitoring and protection functions;
    5.Engine speed, engine oil pressure, engine water temperature, battery voltage, generator voltage;
    6.Generator current, engine frequency;Has PLC logical function (maximum supports 50 steps);Sleep mode to save power;
    7.Hierarchical load rejection - loading/hierarchical virtual load (load box);250 event log (with date and time).
     
     
    Package Includes:
    1 x Controller                               
    4 x Screws
  •
    $769.00
    $769.00
    $0.00
    Original DSE7410 MKII genset auto start control module
    Free Shipping
    Application：
    genset

    Interchange part number:
    DSE7410

    Description:
    MKII genset controller auto start control module 

    PRODUCT VARIANTS
    7410-03 – 7410 MKII Auto Start Control Module
    7410-04 – 7410 MKII Auto Start Control Module (Htr)

    Condition: New,Original

    PLEASE NOTE: Genuine/Original parts do not provide return or exchange service.
  •
    $139.00
    $139.00
    $0.00
    Free Shipping
    Application:
    Automatic voltage regulator AVR R450M voltage regulator of a sealed electronic devices, by adjusting the excitation current in order to stabilize the output voltage of the brushless generator.
    Voltage:70-150V AC
    Frequency:50-60Hz nominal
    Output Voltage:max 63V dc
    Current:
    continuous 8A
    Intermittent 15A for 10 secs
    Regulation:+/- 1%     

    Technical parameters - Voltage regulation : ± 0.5 %.
    Under-speed protection by function :
    1. U/f( LAM:OFF)
    2. U/f (LAM: MODE1)
    Auto-adaptating LAM + 2 U/f (LAM: MODE 2)
    Nominal excitation current 6A.
    Maximum excitation current : 10A during 10 s.
    Supply range 150V (50Hz/60Hz).
    Voltage detection : =<530V
    Protection : fuse fast 10A.
    Protection on load, short-circuit and voltage reference loss

    Interchange part number:
    FG Wilson:
    10000-47135,1000047135
    Leroy Somer:
    R450M

    Description:
    Automatic Voltage Regulator AVR

    Condition:New, replacement
  • $152.80
    $152.80
    $0.00
    Automatic Voltage Regulation AVR Robin RGV12100
    Free Shipping
    Application:
    Yamaha EF12000E Generator Mitsubishi 6500 Generator

    Interchange part number: 
    J0610

    Description: 
    Automatic Voltage Regulation

    Condition:
    New, replacement
  • $77.80
    $77.80
    $0.00
    AVR for Leroy Somer R438 Automatic Voltage Regulator 
    Free Shipping
    Application：
    1.    Leroy Somer Voltage Regulator AEM110RE017 AVR
    2.Leroy Somer Voltage Regulator AEM110RE003 AVR
    3.SDMO Voltage Regulator 330410127 AVR
    4.SDMO Voltage Regulator 330410164 AVR
    5.SDMO Voltage Regulator 330410334 AVR
    6.FG Wilson Voltage Regulator 922-045 AVR
    7.Cat / Olympian Voltage Regulator 922-045 AVR

    Interchange part number:R438 
    Description:AVR 
    Specification:
    Voltage regulation +/-0.5% at a steady-state and constant speed
    Controls by transistor mean the regulation quality is independent of load applied
    Integrated "LAM" system to cope with increased loads applied to the engine
    Suitable for high levels of vibration and harsh environments
    The R438 is compatible with other modules giving additional functions
    Standard power supply: AREP or PMG      Rated overload current: 8A-10s
    Electronic protection(overload, a short circuit on the opening of voltage sensing circuit excitation overload current for 10 seconds then return to approximately 1A).
    Fuse: F1 on X1,X2.8A;slow-250V
    Voltage sensing: 5VA isolated via transformer
    1.0-110V terminals=90-140V
    2.0-220V terminals=170-260V
    3.0-380V terminals=340-520V
    Voltage Regulation:+/-1%
    Normal or rapid response time via ST2 jumper
    Voltage adjustment via potertiometer P2
    Current sensing(parallel operation): C.T. 2.5VA cl1,sencondary 1A(optional)
    Quadrature drop adjustment via potertiometer P1
    Max,excitation current adjustment via P5
    Applications to Alternators: LSA 42.2,43.2,44.2
    Compatible with the AREP or PMG exitation system
    Condition: New, aftermarket
  • $60.00
    $60.00
    $0.00
    Automatic Voltage Regulator AVR Stamford AS480 E000-14808 
    Free Shipping
    Application:
    FG Wilson genset with Perkins engine

    Interchange part number:
    Stamford Model # AS480
    Cummins Part # E000-14808/1P
    Kubota G3362-02802

    Description:
    Automatic Voltage Regulator AVR

    Condition: New, replacement 
  • $48.00
    $48.00
    $0.00
    SX460 AVR for Perkins FG Wilson 10-50KVA genset
    Free Shipping
    Application:
    Perkins FG Wilson 10-50KVA genset

    Interchange part number: 
    SX460 

    Description: 
    AVR 

    Condition:
    New, replacement
  • $473.00
    $473.00
    $0.00
    Free Shipping
    Application:
    ComAp Electric Asynchronous Motors

    Interchange part number: 
    InteliDrive Lite ID-FLX-LITE 

    Description: 
    • Engine controller for land-based and marine Tier4 applications
    • Control, monitoring and protection for both mechanical and electronic diesel/gas engines in one unit
    • Automatic or manual start/stop of the engine
    • Programmable On/Off panel button
    • Support of engines with Electronic Control Unit (ECU) - J1939 or Cummins Modbus
    • Analog gauge (VDO, Datcon and others) outputs – operator friendly
    • Smooth engine speed control
    • 7 configurable binary inputs
    • 7 configurable binary outputs
    • 9 configurable analog inputs (3 resistive, 4 voltage) + 2 not configurable voltage inputs 
    • Selectable protections alarm/shutdown
    • 3 level of password protection
    • USB, RS485/RS232/Modem/Modbus communication
    • Automatic SMS on alarm
    • On-line control and monitoring over web pages (embedded web server) via IB-Lite
    • Optional GSM/GPRS modem/wireless Internet via IL-NT GPRS
    • AirGate support
    • 2 languages (user changeable)
    • Real time clock and event history log
    • PLC functions: PID loop, Comparators, Timers
    • Push buttons for simple control, lamp test
    • Front panel sealed to IP65
    • EN, UL certifications 
    Condition:New
Aller sur le site d'origine