Deep Sea DSE701 Manual Auto Start Control Module


Style: MS (Manual)
Preis:
Sonderpreis$67.10

Beschreibung

Deep Sea DSE701 Manual Auto Start Control Module
Free Shipping

Interchange part number: DSE701

Condition: Replacement New


Description:

The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
Additionally, the Autostart versions (701AS) of the controller will respond to a remote switched input to begin the start sequence.
Power Supply: DC 8 to 35 V Continuous & Cranking Dropouts: Able to survive voltage dips during cranking. Without the need for internal batteries.
Alternator Input Range :15-305V AC RMS (+20%) & Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
Overspeed: nominal frequency +14% (+24% Overshoot) & Start Output: Solid State 1.2A negative grounding terminal & Run Output: Solid State 1.2A negative grounding terminal & Pre-heat Output: Solid State1.2A negative grounding terminal & Operating Temperature Range: -30 to +70C
The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
Additionally, the Autostart versions(701as) of the controller will respond to a remote switched input to begin the start sequence.
Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.
Style: 701MS (Manual) 701AS (Auto)
Power Supply: 8 to 35 Vdc Continuous
Cranking Dropouts: Able to survive voltage dips during cranking.Without the need for internal batteries.
Alternator Input Range :15 - 305 V AC RMS (+20%)
Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
Overspeed: nominal frequency +14% (+24% Overshoot)
Start Output: Solid State 1.2A negative grounding terminal
Run Output: Solid State 1.2A negative grounding terminal
Pre-heat Output: Solid State1.2A negative grounding terminal
Operating Temperature Range: -30 to +70C

Recently viewed

SmartGen HGM8110A Genset Controller DC Genset Controller | WDPART
New Turbo S1B036 Turbocharger RE554959 RE538931 for John Deere 4045 EngineNew Turbo S1B036 Turbocharger RE554959 RE538931 for John Deere 4045 Engine
Starter Relay 24V for Kobelco Excavator SK230-6E Mitsubishi Engine 6D34 | WDPARTStarter Relay 24V for Kobelco Excavator SK230-6E Mitsubishi Engine 6D34
SmartGen HGM7110N Genset Controller DC Genset Controller | WDPART
04226-E0061 294200-0650 294200-0670 SCV Control Valve - 004226-E0061 294200-0650 294200-0670 SCV Control Valve for Hitachi Hino J05E J08E
Deep Sea DSE333 Auto Transfer Switch Control Module
8K0907807E 5WK96688 NOx Nitrogen Oxide Sensor for Audi A4 S4 A5 S5 VW Passat8K0907807E 5WK96688 NOx Nitrogen Oxide Sensor for Audi A4 S4 A5 S5 VW Passat