Deep Sea DSE701 Manual Auto Start Control Module


Style: MS (Manual)
Preis:
Sonderpreis$67.10

Beschreibung

Deep Sea DSE701 Manual Auto Start Control Module
Free Shipping

Interchange part number: DSE701

Condition: Replacement New


Description:

The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
Additionally, the Autostart versions (701AS) of the controller will respond to a remote switched input to begin the start sequence.
Power Supply: DC 8 to 35 V Continuous & Cranking Dropouts: Able to survive voltage dips during cranking. Without the need for internal batteries.
Alternator Input Range :15-305V AC RMS (+20%) & Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
Overspeed: nominal frequency +14% (+24% Overshoot) & Start Output: Solid State 1.2A negative grounding terminal & Run Output: Solid State 1.2A negative grounding terminal & Pre-heat Output: Solid State1.2A negative grounding terminal & Operating Temperature Range: -30 to +70C
The model 701 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel. The module is used to start and stop the engine and indicates fault conditions, automatically shutting down the engine and indicating the cause of the failure by LED, giving true, first up fault annunciation.
Additionally, the Autostart versions(701as) of the controller will respond to a remote switched input to begin the start sequence.
Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.
Style: 701MS (Manual) 701AS (Auto)
Power Supply: 8 to 35 Vdc Continuous
Cranking Dropouts: Able to survive voltage dips during cranking.Without the need for internal batteries.
Alternator Input Range :15 - 305 V AC RMS (+20%)
Alternator Input Frequency: 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
Overspeed: nominal frequency +14% (+24% Overshoot)
Start Output: Solid State 1.2A negative grounding terminal
Run Output: Solid State 1.2A negative grounding terminal
Pre-heat Output: Solid State1.2A negative grounding terminal
Operating Temperature Range: -30 to +70C

Recently viewed

37768-04200 V-Belt for MITSUBISHI ENGINE S12R-Y1PTA-2V-Belt 37768-04200 For Mitsubishi Engine S12R-Y1Pta-2
Wdpart Articulated Tie Rod Assembly 366665A1 for CASE Telehandler 686G 686GXR 688GWdpart Articulated Tie Rod Assembly 366665A1 for CASE Telehandler 686G 686GXR 688G
GAC Speed Governor Speed Controller ESD5330 | WDPART
MSP675 Magnetic Speed Sensor Pick Up for GACWDPART Magnetic Speed Sensor MSP675 Pick Up for GAC
915-636 Main Bearing STD SET for FG Wilson 13KVA-22KVA with 404C 404D engine